Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.050 kg |
| Spanner Size | 17 |
| Cable Length | 385 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.41
Important compatibility info
| Weight | 0.159 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 08 36 584 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.040 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Weight | 3.36 kg |
| Paired article numbers | 43040 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Upper |
| Weight | 1.55 kg |
| Paired article numbers | 43134 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.106 kg |
| Inner length 2 | 857 mm |
| Outer length 1 | 1235 mm |
| Inner length 1 | 940 mm |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 762 mm |
| Additional Information 2 | with crown nut |
| Thread Size | M27 x 1,5 |
| Rod/Strut | Push Rod |
| Weight | 7.400 kg |
| Cone Size | 32 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.47
Important compatibility info
| Number of Chain Links | 170 |
| Function | Timing Chain |
| Placement on Vehicle | Upper |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.6 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 1.03 kg |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| External Thread Size | M8 x 1,25 |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 0.837 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186762, 186942, 186781 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 7.699 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 38.8 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 73 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.57
Important compatibility info
| Paired article numbers | 182437 |
| External Teeth, Diff.Side | 25 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.726 kg |
| Function | Drive Shaft |
| Min. Length | 596 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.60
Important compatibility info
| Weight | 4.2 kg |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 130 mm |
| Thickness | 445 mm. 220 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.63
Important compatibility info
| Weight | 1.59 kg |
| Pressure | 8.5 bar |
| Type | Brake Valve, trailer |
| Function | Brake Valve, trailer |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.63
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 125 mm |
| Centering Diameter | 76 mm |
| Number of mounting bores | 1 |
| Mounting points diameter | 15.6 mm |
| Function | Brake Disc |
| Outer diameter | 296 mm |
| Thickness | 69.5 mm |
| Brake Disc Thickness | 16 mm |
| Weight | 7.51 kg |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.65
Important compatibility info
| for OE number | 03L 965 561 |
| Weight | 0.215 kg |
| Number of Connectors / Ports | 3 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.67
Important compatibility info
| Weight | 7.396 kg |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 88.9 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Min. Length | 642 mm |
| External Teeth, Diff.Side | 37 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.68
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.68
Important compatibility info
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
| Weight | 1.641 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.69
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 8 835 572 |
| Weight | 1.816 kg |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.69
Important compatibility info
| Weight | 7.93 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 73.5 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.71
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 4.943 kg |
| Number of mounting bores | 6 |
| Min. Length | 511 mm |
| Wheel Sided Joint Diameter | 78 mm |
| Transmission-side joint diameter | 93.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.71
Important compatibility info
| Weight | 1.36 kg |
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 56 84 102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.74
Important compatibility info
| Weight | 0.614 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 190678, 189887 |
| for OE number | 11 65 7 618 035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.75
Important compatibility info
| Weight | 3.519 kg |
| Placement on Vehicle | Rear Axle |
| Length | 206 mm |
| Width | 90 mm |
| Mounting points diameter | 32 mm |
| Type | Bushing, stabiliser coupling rod |
| Function | Bushing, stabiliser coupling rod |
| Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Weight | 0.628 kg |
| Housing length | 209.5 mm |
| Mounting points diameter | 18 mm |
| Paired article numbers | 32045 |
| Placement on Vehicle | Right Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Paired article numbers | 32046 |
| Placement on Vehicle | Left Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.628 kg |
| Mounting points diameter | 15.5 mm |
| Housing length | 208.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16 x 1,5 |
| Bolt Hole Circle Diameter | 104.2 mm |
| Paired article numbers | 181798 |
| Bore Diameter | 10.7 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.186 kg |
| Number of mounting bores | 6 |
| Min. Length | 594 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 83.8 mm |
| Number of Teeth, ABS ring | 45 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 30194 |
| Cone Size 2 | 22 mm |
| Cone Size | 19.5 mm |
| Additional Information | with lock nut |
| Placement on Vehicle | Lower, Front Axle Right, Front |
| Weight | 2.169 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30195 |
| Weight | 2.230 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 22 mm |
| Cone Size | 19.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Pipe Diameter | 53 mm. 45 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
| Min. Length | 327 mm |
| Max. Length | 522 mm |
| Function | Shock Absorber |
| Weight | 1.770 kg |
| Shock Absorber Type | Oil Pressure |
| Bore Diameter | 14 mm |
| Mounting bores distance | 522 mm |
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.79
Important compatibility info
| Weight | 6.7 kg |
| Placement on Vehicle | Front Axle |
| Length | 206 mm |
| Width | 190 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 110.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.79
Important compatibility info
| Outer diameter | 300 mm |
| Thickness | 73 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Weight | 7.47 kg |
| Brake Disc Thickness | 22 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.82
Important compatibility info
| Weight | 0.583 kg |
| Outer diameter | 55 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.83
Important compatibility info
| Screw length below head | 146 mm |
| Function | Brake Shaft, drum brake |
| Weight | 1.8 kg |
| Paired article numbers | 175195 |
| Number of Teeth | 10 |
| Outer diameter | 77.5 mm |
| Length | 197 mm |
| Type | Brake Shaft, drum brake |
| Placement on Vehicle | Right |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.85
Important compatibility info
| Function | Tensioner Pulley, timing belt |
| Outer diameter | 62 mm |
| Width | 34 mm |
| Weight | 0.852 kg |
| Type | Tensioner Pulley, timing belt |
| Replaces | 26718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.85
Important compatibility info
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Weight | 1.8 kg |
| Screw length below head | 146 mm |
| Paired article numbers | 175196 |
| Number of Teeth | 10 |
| Outer diameter | 77.5 mm |
| Length | 197 mm |
| Placement on Vehicle | Left |
| Shape/Form | S Shape |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.85
Important compatibility info
| Weight | 1.66 kg |
| Inner diameter | 30 mm |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 143 mm |
| Number of Ribs | 5 |
| Thickness | 29.5 mm |
| Type | Belt Pulley, crankshaft |
| for OE number | 06F 105 243 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.86
Important compatibility info
| Replaces | 108617 |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 8.030 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 295 mm |
| Thickness | 49.3 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 8.94 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 323 mm |
| Thickness | 34.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| for OE number | 910 423 02 00 07 |
| Surface | Coated |
| Weight | 8.0 kg |
| Centering Diameter | 85 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Thickness | 71 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Rotor Style | Solid |
| Rim Hole Number | 6 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, compressed-air system |
| Weight | 0.067 kg |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 0.04 kg |
| Function | Injector |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Additional Information | with gaskets/seals |
| Type | Injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 8.29 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 40 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 635 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 28.5 mm |
| Mounting points diameter | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 2.32 kg |
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178737 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178736 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 BA |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.93
Important compatibility info
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Material | Cast Aluminium |
| Additional Information 2 | with studs |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 2.11 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023