Proud to be a UK-based company
Contact us
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Placement on Vehicle | Left, Upper |
| Weight | 2.746 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.48
Important compatibility info
| Outer diameter | 52 mm |
| Additional Information 2 | with cable |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Weight | 0.8 kg |
| Pipe Diameter | 8 mm |
| Type | Fuel Pump |
| Function | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.49
Important compatibility info
| Weight | 0.17 kg |
| Number of Connectors / Ports | 8 |
| Function | Control Unit, fuel pump |
| Extra Description | febi Plus |
| Type | Control Unit, fuel pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.52
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.054 kg |
| Length | 66 mm |
| Number of Connectors / Ports | 8 |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.56
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 176371 |
| Cone Size | 22 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.150 kg |
| Placement on Vehicle | Rear, Lower, Front Axle Right |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.58
Important compatibility info
| Weight | 1.2 kg |
| Function | Ball Joint, axle strut |
| Type | Ball Joint, axle strut |
| Inner diameter | 20 mm |
| Rod/Strut | Guide Rod |
| External Thread Size | M30 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 64 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.58
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.450 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 354 mm |
| Min. Length | 236 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.58
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 2.038 kg |
| External Thread Size | M12 x 1,25 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.63
Important compatibility info
| Number of Connectors / Ports | 5. 3 |
| Function | Fuel Feed Unit |
| Weight | 0.740 kg |
| Additional Information | with gasket/seal, with fuel sender unit |
| Type | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.63
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 1.2 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.64
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Weight | 0.32 kg |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.64
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 43762 |
| Weight | 2.116 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43759)
- 1x Febi Nut (39976)
£76.66
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178749 |
| Weight | 5.2 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178748 |
| Weight | 5.2 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.68
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Top fork |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 380 mm |
| Weight | 1.6 kg |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 43 mm |
| External Thread Size | M14 x 2 |
| Min. Length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.69
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 1.577 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.70
Important compatibility info
| Width | 41 mm |
| Outer diameter | 59 mm |
| Function | Alternator Freewheel Clutch |
| Inner diameter | 15 mm |
| Number of Ribs | 4 |
| Weight | 0.457 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.71
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.84 kg |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.72
Important compatibility info
| Weight | 0.095 kg |
| Voltage | 24 V |
| Number of Connectors / Ports | 2 |
| Type | Solenoid Valve |
| Function | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.73
Important compatibility info
| Weight | 0.092 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186655 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.73
Important compatibility info
| Weight | 8.88 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 52.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 18558 |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.73
Important compatibility info
| Paired article numbers | 174779 |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Weight | 1.200 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.75
Important compatibility info
| Weight | 11.958 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 244.5 mm |
| Width | 113.9 mm |
| Brake System | Knorr |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 29.3 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.76
Important compatibility info
| Weight | 1.641 kg |
| Placement on Vehicle | Left |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 6Q0 199 555 AS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.78
Important compatibility info
| Weight | 9.3 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 350 mm |
| Thickness | 36.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.82
Important compatibility info
| Weight | 2.53 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43046 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.84
Important compatibility info
| Weight | 4.472 kg |
| Extra Description | febi Plus |
| Height | 415 mm. 383 mm |
| Outer diameter | 333 mm |
| Inner diameter | 200 mm |
| Filter type | Filter Insert |
| Outer diameter 1 | 193 mm |
| Type | Air filter kit |
| Function | Air filter kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (47531)
- 1x Febi Air Filter (105983)
£76.84
Important compatibility info
| Weight | 2.7 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 275 mm |
| Min. Length | 149 mm |
| Pipe Diameter | 78 mm. 42 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.85
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Thread Size | M30x1,5 |
| Weight | 8.814 kg |
| Min. Length | 720 mm |
| ABS Ring Diameter | 114 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Type | Drive Shaft |
| Transmission-side joint diameter | 89.1 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 30 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.86
Important compatibility info
| Type | Thermostat, coolant |
| Opening Temperature | 91 °C |
| Outer diameter | 73 mm |
| Additional Information 2 | with seal ring |
| Weight | 0.21 kg |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.21 kg |
| Additional Information 2 | with seal ring |
| Opening Temperature | 87 °C |
| Outer diameter | 73 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.87
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40853 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.122 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (40822)
- 1x Febi Ball Joint (40845)
- 1x Febi Nut (34653)
- 1x Febi Bolt, control arm (40852)
£76.89
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.91 kg |
| Type | Mounting, engine |
| for OE number | 51855484 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.90
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 185795 |
| Weight | 3.182 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 22 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.91
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.210 kg |
| Placement on Vehicle | Front Axle Left, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38058 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.92
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.210 kg |
| Placement on Vehicle | Front Axle Right, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38057 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.92
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.63 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 50.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 43922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.95
Important compatibility info
| Weight | 2.08 kg |
| Placement on Vehicle | Left |
| Width | 60 mm |
| Outer diameter | 383 mm |
| Operating Mode | Electric |
| Rated Power | 400 W |
| Number of Wings | 11 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.141 kg |
| Type | Switch, splitter gearbox |
| Function | Switch, splitter gearbox |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Number of Ribs | 6 |
| Function | V-Ribbed Belt Set |
| Type | V-Ribbed Belt Set |
| Weight | 0.998 kg |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28940)
- 1x Febi Belt Tensioner, v-ribbed belt (34805)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (32820)
£76.97
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
| for OE number | 967 241 02 13 |
| Weight | 3.434 kg |
| External Thread Size | M18 x 1,5 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Number of Connectors / Ports | 6 |
| Combi Switch Function | with wipe-wash function, with high beam function, with indicator function |
| Function | Steering Column Switch |
| Weight | 0.2465 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Weight | 2.06 kg |
| Outer diameter | 180 mm |
| Thickness | 35 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Number of Connectors / Ports | 9 |
| Extra Description | febi Plus |
| Weight | 0.056 kg |
| for OE number | 55271957 |
| Type | Control Unit, glow time |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Weight | 1.76 kg |
| Material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Weight | 1.6 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Function | Interior Blower |
| Additional Information 2 | with bolts/screws |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Function | Starter |
| Type | Starter |
| Rated Power | 1.3 kW |
| Number of Teeth | 9 |
| Voltage | 12 V |
| Weight | 2.69 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Rated Power | 1.4 kW |
| Number of Teeth | 13 |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
| Weight | 2.95 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Surface | Coated |
| Centering Diameter | 93.1 mm |
| Bolt Hole Circle Diameter | 111.5 mm |
| Thickness | 55.5 mm |
| Brake Disc Thickness | 33 mm |
| Minimum thickness | 30 mm |
| Function | Brake Disc |
| Weight | 9.65 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.98
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023