Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.75 kg |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| External Teeth, Wheel Side | 29 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 8.014 kg |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 27 |
| Min. Length | 631 mm |
| Wheel Sided Joint Diameter | 100 mm |
| Transmission-side joint diameter | 92.6 mm |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Weight | 2.39 kg |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.99
Important compatibility info
| Weight | 0.625 kg |
| Length | 1050 mm |
| Material | Rubber |
| Thickness | 18 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Cone Size | 30 mm |
| External Thread Size | M24 x 1,5 |
| Thread Length | 20 mm |
| Weight | 7.9 kg |
| Additional Information 2 | with crown nut |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Outer diameter | 52 mm |
| Length | 538 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 3.660 kg |
| Outer diameter 1 | 62 mm |
| Width | 55 mm |
| Outer diameter | 74 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left |
| Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Length | 164 mm |
| Outer diameter | 57 mm |
| Function | Joint, propshaft |
| Weight | 5.65 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 980 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 8.6 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.119 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 52 |
| Timing Chain Size | G44-AMD1 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (184970)
- 1x Febi Chain Tensioner, oil pump drive (178958)
£78.00
Important compatibility info
| Weight | 11.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 1105 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Voltage | 12 V |
| for OE number | 12 41 7 501 738 |
| Weight | 3.9 kg |
| Rated Power | 1.4 kW |
| Type | Starter |
| Number of Teeth | 9 |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 1.211 kg |
| for OE number | 038 103 469 AD |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 91 mm |
| Transmission-side joint diameter | 81.4 mm |
| Type | Drive Shaft |
| Min. Length | 1017 mm |
| External Teeth, Diff.Side | 39 |
| Weight | 9.022 kg |
| External Teeth, Wheel Side | 27 |
| Paired article numbers | 182856 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.48 kg |
| Function | Thermostat, coolant |
| Outer diameter | 32 mm |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| for OE number | 98 086 472 80 |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 7.1 kg |
| Placement on Vehicle | Front Axle |
| Length | 872 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Additional Information | with Thrust Bearing |
| Placement on Vehicle | Front Axle, Right |
| Length | 229 mm |
| Outer diameter | 45 mm |
| Function | Repair Kit, kingpin |
| Weight | 3.66 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (19164)
- 2x Febi Split Sleeve (19162)
- 2x Febi Seal Ring, steering knuckle (19166)
- 1x Febi Seal Ring, steering knuckle (19167)
- 1x Febi Bush, steering knuckle (19168)
- 3x Febi Bush, steering knuckle (19169)
- 1x Febi Spacer Ring (19163)
- 1x Febi Lock Ring, steering knuckle (19165)
£78.00
Important compatibility info
| Weight | 0.764 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 30 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.1 kg |
| Paired article numbers | 175681 |
| Operating Mode | Electric |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 8.4 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Length | 910 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 180251 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 4.590 kg |
| Paired article numbers | 193437 |
| Placement on Vehicle | Rear Axle Left |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 85 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Width | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.430 kg |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Colour | red/brown |
| Length | 901 mm |
| Outer diameter | 50 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.390 kg |
| Placement on Vehicle | both sides |
| Length | 310 mm |
| Housing Diameter | 35 mm |
| Eject Force | 930 N |
| Stroke | 94 mm |
| Mounting points diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 180.5 mm |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Number of Ribs | 8 |
| Type | V-Ribbed Belt Set |
| Weight | 1.685 kg |
| Additional Information 2 | with tensioner element |
| Length | 2080 mm |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29076)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£78.00
Important compatibility info
| Type | Repair Kit, kingpin |
| Weight | 2.71 kg |
| Outer diameter | 38 mm |
| Paired article numbers | 08511 |
| Additional Information 2 | with bearing |
| Additional Information | with Thrust Bearing |
| Length | 217 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08512)
- 4x Febi Bush, steering knuckle (08513)
- 2x Febi Seal Ring, steering knuckle (08514)
- 1x Febi Pressure Piece, kingpin (01500)
- 1x Febi Springwasher (07583)
- 1x Febi Nut (02574)
- 1x Febi Bush, steering knuckle (04323)
- 1x Febi Lock Ring, steering knuckle (04325)
- 2x Febi Seal Ring, steering knuckle (04327)
- 1x Febi Lock Ring, steering knuckle (04326)
- 2x Febi Circlip (04328)
£78.00
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 187792 |
| Weight | 2.724 kg |
| Cone Size | 17.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 22 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2 kW |
| Weight | 4.0 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 2.630 kg |
| Placement on Vehicle | Right Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 339 mm |
| Min. Length | 242 mm |
| Pipe Diameter | 44.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Thickness | 62.5 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Length | 330 mm |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mounts |
| Weight | 1.86 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 181418 |
| Weight | 5.316 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 0.294 kg |
| Type | Tensioner, timing chain |
| Function | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 330 mm |
| Thickness | 129 mm |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 177 mm |
| Minimum thickness | 26 mm |
| Number of Holes | 8 |
| Brake Disc Type | Internally Vented |
| Brake Disc Thickness | 34 mm |
| Weight | 16.8 kg |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 1.9 kg |
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.45 kg |
| Operating Mode | Manual |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Outer diameter | 327 mm |
| Inner diameter | 217 mm |
| Height | 605 mm |
| Filter type | Filter Insert |
| Weight | 5.570 kg |
| Function | Air Filter |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Weight | 8.836 kg |
| Thread Size | M29x1,5 |
| External Teeth, Wheel Side | 30 |
| Transmission-side joint diameter | 94 mm |
| External Teeth, Diff.Side | 26 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 98 mm |
| Placement on Vehicle | Rear Axle |
| Min. Length | 854 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.56 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40412 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Weight | 1.905 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36049)
- 1x Febi Ball Joint (37339)
- 1x Febi Nut (34818)
- 1x Febi Washer (40408)
- 1x Febi Screw (21477)
- 1x Febi Screw (40410)
- 1x Febi Nut (14392)
£78.00
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 182083 |
| Weight | 4.680 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.01
Important compatibility info
| Weight | 0.763 kg |
| Material | NBR (nitrile butadiene rubber), PVC |
| Inner diameter 1 | 76.5 mm |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Inner diameter 2 | 45.5 mm |
| Function | Intake Hose, air filter |
| Additional Information 2 | with sensor |
| Extra Description | febi Plus |
| Type | Intake Hose, air filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.03
Important compatibility info
| Weight | 8.090 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 315 mm |
| Thickness | 78.5 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.5 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 96.3 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.04
Important compatibility info
| Number of Connectors / Ports | 4. 5 |
| Weight | 0.122 kg |
| Type | Control Unit, glow time |
| Extra Description | febi Plus |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.06
Important compatibility info
| Weight | 1.4 kg |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.08
Important compatibility info
| Outer diameter | 140 mm |
| Weight | 1.054 kg |
| Inner diameter | 54 mm |
| Additional Information 2 | with bolts/screws |
| Placement on Vehicle | Rear |
| Bolt Hole Circle Diameter | 105 mm |
| Thickness | 41 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Additional Information | with nuts, with bush |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26294)
- 1x Febi Centering Sleeve, propshaft (171154)
- 3x Febi Screw (40846)
- 3x Febi Nut (43511)
- 3x Febi Screw (40942)
£78.10
Important compatibility info
| Weight | 5.410 kg |
| Placement on Vehicle | Rear Axle |
| Rod/Strut | Guide Rod |
| Function | Rod/Strut, wheel suspension |
| Extra Description | ProKit |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rod/Strut, wheel suspension (24211)
- 2x Febi Control/Trailing Arm, wheel suspension (23047)
- 2x Febi Bushing, axle beam (22699)
- 8x Febi Screw (29451)
- 8x Febi Nut (30005)
- 4x Febi Screw (32624)
£78.10
Important compatibility info
| Vehicle Equipment | for vehicles without start-stop function |
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.4 kW |
| Weight | 2.98 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.11
Important compatibility info
| Function | Oil Filter |
| Height | 139 mm |
| Outer diameter | 100 mm |
| Filter type | Centrifuge |
| Type | Oil Filter |
| Weight | 0.235 kg |
| Additional Information | with gaskets/seals |
| Housing material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.11
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 2.305 kg |
| for OE number | 82 00 805 809 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.12
Important compatibility info
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Weight | 0.047 kg |
| Cable Length | 183 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.16
Important compatibility info
| Weight | 0.442 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023