Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Transmission-side joint diameter | 92.5 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 542 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.078 kg |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Length | 290 mm |
| Outer diameter | 53 mm |
| Additional Information 2 | with pressure switch (high pressure side), with pressure switch (low pressure side), with pressure switch |
| Number of Connectors / Ports | 3 |
| Weight | 0.8 kg |
| Number of mounting bores | 2 |
| Mounting points diameter | 10 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.04 kg |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Weight | 6.6 kg |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.84 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 31 8 618 317 S3 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
£82.95
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Weight | 0.866 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 5.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Thickness | 55.43 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 3.513 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 57 mm |
| Outer diameter | 96 mm |
| Inner diameter | 35 mm |
| Bearing Type | Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172392)
- 1x Febi Axle Bolt, drive shaft (104750)
£82.95
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 28 mm |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 140 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 1.903 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Paired article numbers | 178396 |
| Operating Mode | Electric |
| Additional Information | with adjuster |
| Lock System | with double sealing |
| Placement on Vehicle | Right Rear |
| Weight | 0.641 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Weight | 7.4 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 635 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 48 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 384 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 34 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front Axle, Driver side |
| Length | 982 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Weight | 7.900 kg |
| Colour | red/brown |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 48 mm |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| Weight | 1.902 kg |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.303 kg |
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023