Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 2.87 kg |
| Spanner Size | 19 |
| Type | Tie Rod |
| Placement on Vehicle | Front Axle, Centre |
| Additional Information 2 | with crown nut |
| Length | 810 mm |
| External Thread Size | M12 x 1,25 |
| Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 0.84 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Function | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 31 8 618 317 S3 |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
£83.94
Important compatibility info
| Weight | 2.3 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer length 1 | 1164 mm |
| Weight | 1.142 kg |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 31286 |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 4.70 kg |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 28 mm |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 140 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 1.903 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 6.510 kg |
| Function | Centre Rod Assembly |
| Outer diameter | 40 mm |
| Cone Size | 26.2 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Length | 730 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| Weight | 1.902 kg |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Additional Information 2 | with crown nut |
| Function | Centre Rod Assembly |
| Weight | 7.7 kg |
| Length | 909 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 5.45 kg |
| Placement on Vehicle | Front Axle |
| Length | 860 mm |
| Width | 62 mm |
| Thickness | 115 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 184531 |
| Cone Size | 16 mm |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| External Thread Size | M16 x 1,5 |
| Weight | 6.864 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 24 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 690 mm |
| Min. Length | 414 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 22 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Replaces | 20010 |
| Weight | 3.75 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.95
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Weight | 9.235 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 904 200 49 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.98
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.062 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Exhaust Turbocharger |
| Cable Length | 366 mm |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.05
Important compatibility info
| Combi Switch Function | with high beam function, with indicator function, with wipe-wash function |
| Function | Steering Column Switch |
| Number of Connectors / Ports | 6 |
| Weight | 0.140 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.05
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 48096 |
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 0.96 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.08
Important compatibility info
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 92 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 45 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 8.737 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.09
Important compatibility info
| Surface | Coated |
| Mounting points diameter | 14.5 mm |
| Bolt Hole Circle Diameter | 111 mm |
| Centering Diameter | 83 mm |
| Outer diameter | 301 mm |
| Minimum thickness | 27 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 30 mm |
| Function | Brake Disc |
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.13
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023