Important compatibility info
Weight | 3.204 kg |
Placement on Vehicle | transmission sided |
Additional Information 2 | with bolts/screws |
Function | Release Fork, clutch |
Extra Description | febi Plus |
Type | Release Fork, clutch |
Additional Information | with cross pin, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Release Fork, clutch (22752)
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint |
Weight | 7.039 kg |
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
External Thread Size | M16 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Paired article numbers | 179226 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.524 kg |
Material | FPM (fluoride rubber), MVQ (silicone rubber) |
Inner diameter | 90 mm |
Colour | Red |
Function | Charge Air Hose |
Additional Information 2 | with clamps |
Extra Description | ProKit |
Type | Charge Air Hose |
Wall Thickness | 4 mm |
Hose Length | 160 mm |
Outer diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (30183)
- 2x Febi Fastening Clamp, charge air hose (39027)
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
External Teeth, Wheel Side | 29 |
Weight | 9.774 kg |
External Teeth, Diff.Side | 29 |
Min. Length | 615 mm |
Wheel Sided Joint Diameter | 120 mm |
Transmission-side joint diameter | 96 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.422 kg |
for OE number | 03C 115 105 N SK |
Type | Oil Pump |
Function | Oil Pump |
Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.150 kg |
Type | Release Fork, clutch |
Additional Information 2 | with bolts/screws |
Additional Information | with bush, with fastening/mounting material |
Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.774 kg |
Function | Steering Column Switch |
Combi Switch Function | with indicator function |
Number of Connectors / Ports | 10 |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with cable, with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.33 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission-side joint diameter | 85.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Wheel Sided Joint Diameter | 105 mm |
Min. Length | 638 mm |
External Teeth, Diff.Side | 37 |
Placement on Vehicle | Front Axle Left |
Weight | 7.692 kg |
External Teeth, Wheel Side | 38 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 RHT |
Weight | 6.103 kg |
Placement on Vehicle | Front Axle |
Length | 780 mm |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Cone Size | 22 mm. 26 mm |
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
External Thread Size | M18 x 1,5, M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 5.110 kg |
Placement on Vehicle | Front Axle |
Width | 49 mm |
Outer diameter | 100 mm |
Inner diameter | 32 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.916 kg |
Paired article numbers | 182626 |
Material | Sheet Steel |
Steering arm type | Control Arm, Four-Point Link (CV) |
Placement on Vehicle | Front Axle Left, Lower, outer |
Additional Information 2 | with ball joint |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 170964 |
Cone Size | 24 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Weight | 5.18 kg |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 225 mm |
Weight | 4.32 kg |
Function | Repair Kit, kingpin |
Outer diameter | 50 mm |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (28397)
- 2x Febi Bush, steering knuckle (08524)
- 1x Febi Bush, steering knuckle (28396)
- 1x Febi Lock Ring, steering knuckle (28395)
- 2x Febi Circlip (05370)
- 1x Febi Lock Ring, steering knuckle (28394)
- 1x Febi Grease Nipple (01094)
- 2x Febi Seal Ring, steering knuckle (28398)
- 1x Febi Kingpin (32432)
- 1x Febi Nut (32433)
- 1x Febi Screw (32435)
- 1x Febi Spacer, kingpin (32436)
- 2x Febi Seal Ring, steering knuckle (32434)
Important compatibility info
Additional Information | with rubber mounts |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 182625 |
Weight | 5.916 kg |
Placement on Vehicle | Front Axle Right, Lower, outer |
Material | Sheet Steel |
Cone Size | 22 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.180 kg |
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Additional Information | with oil drain plug |
Additional Information 2 | with oil sump gasket |
for OE number | 06 52 133 S1 |
Seal Material | NBR (nitrile butadiene rubber) |
Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (29469)
- 1x Febi Gasket, oil sump (04610)
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 0.197 kg |
Material | Steel |
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Extra Description | febi Plus |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,5 |
Weight | 1.790 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 32232 |
Additional Information | with lock nut |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper |
Additional Information 2 | with bearing, with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill quantity | 12 l |
Additional Information | with lids |
Weight | 3.710 kg |
Length | 471 mm |
Width | 264 mm |
Material | PP (Polypropylene) |
Thickness | 440 mm |
Function | Expansion Tank, coolant |
Extra Description | ProKit |
Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023