Important compatibility info
Width | 20 mm |
Number of Teeth | 131 |
Weight | 0.646 kg |
Type | Timing Belt Kit |
Function | Timing Belt Kit |
Units / Pulleys | incl. deflection pulley, incl. tensioner pulley |
Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (181594)
- 1x Febi Tensioner Pulley, timing belt (178018)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (180137)
- 1x Febi Pulley Bolt (33781)
- 1x Febi Nut (180733)
- 1x Febi Stud (181107)
Important compatibility info
Operating Pressure | 15.5 bar |
Capacity | 40 l |
Outer diameter | 246 mm |
Number of Connectors / Ports | 4 |
Weight | 12.6 kg |
Type | Air Tank, compressed-air system |
Function | Air Tank, compressed-air system |
Internal Thread Size | M22 x 1,5 |
Material | Steel |
Length | 932 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.0 kg |
Placement on Vehicle | Right |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Aluminium |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 06 84 609 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.450 kg |
Function | Timing Chain |
Number of Chain Links | 108 |
Chain Type | Simplex, Closed chain |
Additional Information 2 | Requires special tools for mounting |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Transmission Type | 5-Speed Manual Transmission |
Inner length 2 | 830 mm |
Weight | 0.852 kg |
Type | Cable Pull, manual transmission |
Outer length 1 | 1183 mm |
Inner length 1 | 850 mm |
Outer length 2 | 1114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Tank, compressed-air system |
Weight | 10.3 kg |
Length | 663 mm |
Material | Steel |
Outer diameter | 276 mm |
Capacity | 35 l |
Operating Pressure | 15.5 bar |
Internal Thread Size | M22 x 1,5 |
Type | Air Tank, compressed-air system |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.200 kg |
Placement on Vehicle | Right |
Paired article numbers | 174775 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 37689 |
Weight | 5.00 kg |
Additional Information | with rubber mounts |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Internal Thread Size | M14 x 1,5 |
Cone Size | 19 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Holes | 16 |
Inner diameter | 6.9 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right |
Function | Brake Shoe |
Type | Brake Shoe |
Brake Pad | without lining |
Weight | 9.6 kg |
Width | 203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.678 kg |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 327 mm |
Material | Rubber/Metal |
Inner diameter | 21 mm |
Weight | 7.008 kg |
Type | Spring Shackle |
Function | Spring Shackle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 860 N |
Length | 505 mm |
Placement on Vehicle | both sides |
Weight | 0.3 kg |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Housing Diameter | 22 mm |
Housing length | 343.5 mm |
Stroke | 131 mm |
Mounting points diameter | 15 mm |
Piston conrod diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
Weight | 7.042 kg |
Min. Length | 639 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 86.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Outer diameter | 144 mm |
Thickness | 38 mm |
Inner diameter | 14 mm |
Function | Joint, propshaft |
Weight | 0.79 kg |
Type | Joint, propshaft |
Hole Spacing | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Minimum thickness | 37 mm |
Bolt Hole Circle Diameter | 144 mm |
Centering Diameter | 165 mm |
Surface | Coated |
Weight | 23.150 kg |
Rim Hole Number | 14 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 376 mm |
Thickness | 107 mm |
Brake Disc Thickness | 45 mm |
Brake Disc Type | Internally Vented |
Function | Brake Disc |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 24 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Weight | 0.48 kg |
Outer diameter | 55 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Type | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Weight | 2.446 kg |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.8 kg |
Placement on Vehicle | Rear Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 568 mm |
Min. Length | 348 mm |
Pipe Diameter | 57 mm. 50 mm |
Mounting points diameter | 16 mm |
Piston conrod diameter | 12 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer length 1 | 1240 mm |
Inner length 1 | 890 mm |
Inner length 2 | 905 mm |
Weight | 0.890 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Outer length 2 | 1120 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 180974 |
Weight | 7.531 kg |
Additional Information | with rubber mounts |
Cone Size | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023