Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.69 kg |
| Piston Diameter | 19.1 mm |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Shoe Set |
| Mounting Type | Pre-assembled |
| Outer diameter | 203.2 mm |
| Width | 39 mm |
| Placement on Vehicle | Rear Axle |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.56
Important compatibility info
| Weight | 5.700 kg |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 651 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.58
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Length | 322 mm |
| Number of Teeth | 48 |
| Paired article numbers | 186654 |
| Weight | 2.9 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 285 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.60
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 322 mm |
| Number of Teeth | 48 |
| Paired article numbers | 186653 |
| Weight | 2.9 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 285 mm |
| Brake Shaft Cam | Z-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.60
Important compatibility info
| Weight | 0.871 kg |
| Voltage | 12 V |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 4 |
| Type | Wiper Motor |
| Function | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.62
Important compatibility info
| Function | Stub Shaft, differential |
| Placement on Vehicle | Front Axle Right |
| Weight | 0.88 kg |
| Type | Stub Shaft, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.67
Important compatibility info
| Weight | 1.400 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.70
Important compatibility info
| Weight | 0.42 kg |
| Function | Heat Exchanger, interior heating |
| Core Length | 186 mm |
| Core Width | 172 mm |
| Core Depth | 34 mm |
| Type | Heat Exchanger, interior heating |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.78
Important compatibility info
| Weight | 0.8 kg |
| Width of castor bearing surface | 28 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration damper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.79
Important compatibility info
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.038 kg |
| Type | Mass Air Flow Sensor |
| for OE number | 1 516 668 |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.79
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Weight | 4.7 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Rated Power | 2 kW |
| Type | Starter |
| Voltage | 12 V |
| Weight | 3.79 kg |
| for OE number | 02E 911 023 LX |
| Number of Teeth | 11 |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16 x 1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 7.486 kg |
| Min. Length | 622 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 89.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.3 mm |
| Function | Drive Shaft |
| Paired article numbers | 183389 |
| Weight | 6.604 kg |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 84 mm |
| Min. Length | 956 mm |
| External Teeth, Diff.Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 27 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Weight | 4.7 kg |
| Voltage | 12 V |
| Rated Power | 2.2 kW |
| Number of Teeth | 9 |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.2 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.4 kW |
| Weight | 4.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 9 |
| Weight | 3.99 kg |
| Rated Power | 2.5 kW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 0.8 kW |
| Weight | 3.0 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.80
Important compatibility info
| Cone Size | 19 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 37690 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 1 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Weight | 4.42 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Number of Chain Links | 124 |
| Weight | 0.599 kg |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (180927)
- 1x Febi Tensioner, timing chain (179775)
- 1x Febi Guide, timing chain (178681)
- 1x Febi Guide, timing chain (178685)
£93.84
Important compatibility info
| Width | 25 mm |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Number of Teeth | 97 |
| Units / Pulleys | incl. hydraulic belt tensioner |
| Weight | 0.960 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26847)
- 1x Febi Tensioner, timing belt (18574)
- 1x Febi Tensioner, timing belt (32577)
£93.84
Important compatibility info
| Weight | 9.0 kg |
| Number of Wings | 10 |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 37689 |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Additional Information | with gaskets/seals, with oil filter, with oil cooler |
| Additional Information 2 | with sensor |
| Weight | 1.5 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| ABS Ring Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Transmission-side joint diameter | 96 mm |
| Min. Length | 992 mm |
| Weight | 10.500 kg |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Type | Sealing Set, air compressor |
| Weight | 0.35 kg |
| Function | Sealing Set, air compressor |
| for OE number | 001 130 36 15 SK1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.885 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| for OE number | 03C 109 158 A S4 |
Additional Information
Technical Information
Warning! This timing chain kit can only be installed if the timing chain drive system has been not modified by the OE manufacturer. This can be established by checking the service history of the vehicle or by checking the OE part numbers on the modified camshaft adjusters (03C 109 571 K / 03C 109 088 G). Please note our technical information.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Shaft Seal, crankshaft (32471)
- 1x Febi Gasket, timing case cover (102422)
- 2x Febi Gasket, timing case (106575)
- 1x Febi Seal Ring, timing chain tensioner (171597)
£93.84
Important compatibility info
| Bore Diameter | 10.5 mm |
| ABS Ring Diameter | 96 mm |
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 85 mm |
| Number of mounting bores | 4 |
| Weight | 6.968 kg |
| External Teeth, Wheel Side | 30 |
| Min. Length | 594 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43600 |
| Weight | 6.08 kg |
| Internal Thread Size | M14 x 2, M12 x 1,75 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Additional Information | with grease, with fastening/mounting material |
| Number of Connectors / Ports | 9 |
| Material | Plastic |
| Weight | 0.05 kg |
| Number of mounting bores | 2 |
| Type | Switch Unit, ignition system |
| Function | Switch Unit, ignition system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Additional Information 2 | with dryer, with integrated oil separator |
| Voltage | 24 V |
| Rated Power | 100 W |
| Weight | 3.5 kg |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Control Range | 0,9+0,7 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Length | 34 mm |
| External Thread Size | M16 x 1,5 |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring |
| Weight | 0.1 kg |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 3.93 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Material | Plastic |
| Type | Cylinder Head Cover |
| Heating / Cooling | with jiggle pin |
| for OE number | 03G 103 469 G |
| Weight | 1.544 kg |
| Colour | Black |
| Additional Information | with gasket/seal |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 6.08 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 43601 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Internal Thread Size | M14 x 2, M12 x 1,75 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Number of mounting bores | 4 |
| Weight | 3.496 kg |
| Mounting points diameter | 9 mm |
| for OE number | 1 721 917 |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 30 |
| Weight | 7.402 kg |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 628 mm |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Min. Length | 494 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Bolt Hole Circle Diameter | 104 mm |
| Additional Information 2 | with screw |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Weight | 6.612 kg |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of hub fastening holes | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.726 kg |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.450 kg |
| Function | Timing Chain |
| Number of Chain Links | 108 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Length | 572 mm |
| Placement on Vehicle | Rear Axle |
| Mounting points diameter | 19 mm |
| Hole Spacing | 130 mm |
| Weight | 10.3 kg |
| Steering arm type | Trailing Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 2.458 kg |
| Function | Clutch Booster |
| Type | Clutch Booster |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Weight | 5.210 kg |
| Placement on Vehicle | Front Axle |
| Length | 1018 mm |
| Outer diameter | 30 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 0.54 kg |
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Bolt Hole Circle Diameter | 114 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 29 |
| Weight | 7.658 kg |
| Min. Length | 547 mm |
| ABS Ring Diameter | 87 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Material | Rubber/Metal |
| Additional Information 2 | with ball bearing, with fastening material |
| Placement on Vehicle | Front Axle |
| Weight | 1.243 kg |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.85
Important compatibility info
| Rod/Strut | Pull Rod |
| Weight | 2.89 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Inner diameter | 14 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 38272 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with hydro mount |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (38393)
- 1x Febi Nut (39976)
£93.85
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Weight | 2.100 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023