Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Brake Caliper |
| Weight | 3.274 kg |
| Paired article numbers | 186223 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.77
Important compatibility info
| Type | Brake Caliper |
| Weight | 3.274 kg |
| Paired article numbers | 186222 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.77
Important compatibility info
| Weight | 10.6 kg |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 19 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 14.414 kg |
| Length | 1735 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 32 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 13.5 kg |
| External Thread Size | M24 x 1,5 |
| Cone Size | 31.5 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Pipe Diameter | 62 mm |
| Function | Centre Rod Assembly |
| Length | 1028 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 3.014 kg |
| Length | 200 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (107195)
£97.80
Important compatibility info
| Weight | 1.075 kg |
| Number of Teeth | 46 |
| for OE number | 48 12 907 |
| Placement on Vehicle | Exhaust Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Length | 1030 mm |
| Thickness | 116 mm |
| Function | Centre Rod Assembly |
| Weight | 7.9 kg |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd front axle |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 5.778 kg |
| Number of mounting bores | 6 |
| Min. Length | 626 mm |
| ABS Ring Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 2.47 kg |
| Type | Water Pump, engine cooling |
| for OE number | 104 200 33 01 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Weight | 1.100 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear, both sides |
| Weight | 1.750 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 2.3 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 256 mm |
| Min. Length | 157 mm |
| Pipe Diameter | 42 mm. 78 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Left |
| Length | 555 mm |
| Outer diameter | 6 mm |
| Operating Mode | Mechanical |
| Weight | 0.050 kg |
| Type | Cable Pull, seat back adjustment |
| Function | Cable Pull, seat back adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.42 kg |
| Seal Material | Rubber |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 168 |
| for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
£97.80
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw, with top |
| Placement on Vehicle | Front Axle Right |
| Weight | 10.368 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 109.9 mm |
| Wheel Sided Joint Diameter | 111.4 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 867 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Pipe Diameter | 42 mm. 81 mm |
| Mounting points diameter | 25 mm |
| Placement on Vehicle | Front |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 3.83 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 335 mm |
| Min. Length | 290 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 8.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 1640 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M28 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 1706 036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
| Weight | 3.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 2.620 kg |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023