Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.58
Important compatibility info
| Weight | 9.94 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 46.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.59
Important compatibility info
| for OE number | 02M 911 024 PX |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| Weight | 3.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.62
Important compatibility info
| Weight | 11.3 kg |
| Material | Grey Cast Iron |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 1609 853 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.62
Important compatibility info
| Function | Bellow, air suspension |
| Thickness | 210 mm. 412 mm |
| Outer diameter | 286 mm. 225 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 13.3 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.64
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Weight | 11.5 kg |
| Number of mounting bores | 2 |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.69
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 165 mm. 448 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Weight | 6.93 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.69
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.96 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 45.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.69
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 8.562 kg |
| Number of mounting bores | 6 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 103 mm |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Cone Size | 26 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 2 |
| Weight | 10.331 kg |
| Paired article numbers | 180516 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Weight | 0.120 kg |
| Bore Diameter | 19 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| External Teeth, Wheel Side | 30 |
| Weight | 6.074 kg |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 86 mm |
| Thread Size | M27x1,5 |
| Bore Diameter | 10.5 mm |
| Min. Length | 682 mm |
| ABS Ring Diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Transmission-side joint diameter | 100 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Placement on Vehicle | Left, outer |
| Length | 810 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Weight | 7.318 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Number of Ribs | 6 |
| Alternator Charge Current | 90 A |
| Belt Pulley Diameter | 56 mm |
| Weight | 5.5 kg |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| for OE number | 5705.FX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Weight | 11.1 kg |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 953 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M38 x 1,5 LHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 5.840 kg |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.23 kg |
| for OE number | 005 151 66 01 |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Function | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Placement on Vehicle | Front Axle |
| Length | 1000 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Weight | 10.69 kg |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 7.7 kg |
| Function | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 40 mm |
| Length | 857 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
Important compatibility info
| Pipe Diameter | 50 mm |
| Cone Size | 30 mm |
| Weight | 14.1 kg |
| Length | 1680 mm |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£102.70
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023