Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 3.755 kg |
| Additional Information | with lids |
| Length | 750 mm |
| Width | 330 mm |
| Material | PP (Polypropylene) |
| Thickness | 200 mm |
| Pressure | 0.9 bar |
| Function | Expansion Tank, coolant |
| Fill quantity | 11.5 l |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| for OE number | 02M 911 024 PX |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| Weight | 3.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 12.311 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 880 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 2786.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 139 mm |
| Outer diameter | 139 mm |
| Thickness | 100 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (185358)
- 1x Febi Nut (185828)
£105.63
Important compatibility info
| Weight | 2.400 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Stabiliser Diameter | 21 mm |
| Length | 1075 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Weight | 4.55 kg |
| Additional Information | with rubber mounts |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)
£105.63
Important compatibility info
| Length | 310 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Weight | 1.504 kg |
| Type | Interior Blower |
| for OE number | 001 830 87 08 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 25 mm |
| Steering arm type | Control Arm |
| Weight | 6.966 kg |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 41732 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Width of castor bearing surface | 24 mm |
| Width | 70 mm |
| Material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.435 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 9.172 kg |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 50 mm |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Length | 995 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 0.24 kg |
| Operating Mode | Hydraulic |
| Thickness | 54 mm |
| Function | Tensioner, timing belt |
| Outer diameter | 32 mm |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 1.5 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 43020 |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Weight | 6.995 kg |
| Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| External Thread Size | M33 x 3,5 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Length | 265 mm |
| Placement on Vehicle | Front Axle |
| Weight | 5.534 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104470)
- 1x Febi Bush, kingpin (104182)
- 1x Febi Nut (107297)
- 1x Febi Spacer, kingpin (107308)
- 1x Febi Spacer, kingpin (107309)
- 1x Febi Spacer, kingpin (107310)
- 1x Febi Spacer, kingpin (107311)
- 1x Febi Spacer, kingpin (107314)
- 1x Febi Bush, steering knuckle (107270)
- 1x Febi Seal Ring, steering knuckle (170501)
- 1x Febi Bush, steering knuckle (170502)
- 1x Febi Seal Ring, steering knuckle (170574)
- 1x Febi Pressure Piece, kingpin (171958)
- 1x Febi Pressure Piece, kingpin (172736)
£105.67
Important compatibility info
| Height | 39 mm |
| Width | 39 mm |
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 173 mm |
| Type | Repair Kit, kingpin |
| Weight | 1.800 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (109533)
- 1x Febi Bush, kingpin (108227)
- 2x Febi Lock Ring, steering knuckle (109458)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (108376)
- 2x Febi Lock Ring, steering knuckle (109459)
- 2x Febi Circlip, kingpin (10553)
- 1x Febi Spacer, kingpin (46072)
- 1x Febi Spacer, kingpin (46073)
- 1x Febi Spacer, kingpin (46074)
- 1x Febi Spacer, kingpin (46075)
- 1x Febi Spacer, kingpin (46076)
- 1x Febi Spacer, kingpin (46077)
- 1x Febi Spacer, kingpin (46078)
- 1x Febi Spacer, kingpin (46079)
- 1x Febi Spacer, kingpin (46080)
- 1x Febi Bush, steering knuckle (107408)
- 1x Febi Seal Ring, steering knuckle (46071)
£105.67
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter, Left |
| Type | Sensor, exhaust gas temperature |
| for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1734 mm |
| Width | 35 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Weight | 11.0 kg |
| Thickness | 103 mm |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.5 kg |
| Pressure side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 70 mm |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Additional Information 2 | with integrated magnetic sensor ring |
| Weight | 1.4 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (101297)
- 4x Febi Screw (101133)
- 1x Febi Nut, kingpin (12181)
£105.67
Important compatibility info
| Weight | 0.525 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.68
Important compatibility info
| Length | 379 mm |
| Outer diameter | 300 mm |
| Number of Connectors / Ports | 5 |
| Weight | 7.0 kg |
| Capacity | 20 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Material | Metal |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Weight | 1.608 kg |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Weight | 0.58 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.73
Important compatibility info
| Weight | 4.800 kg |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| External Thread Size | M18 x 1,5 |
| for OE number | 960 241 00 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.74
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 9.8 kg |
| Type | Spring-loaded Cylinder |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Spring-loaded Cylinder |
| Placement on Vehicle | Right |
| Paired article numbers | 184763 |
| Brake Type | Disc Brake |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.79
Important compatibility info
| Length | 222 mm |
| Width | 44 mm |
| Outer diameter | 73 mm |
| Thickness | 142 mm |
| Inner diameter | 47 mm |
| Weight | 0.925 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.94
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 6.96 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 86.2 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Function | Brake Disc |
| Surface | Oiled |
| Centering Diameter | 52.3 mm |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.96
Important compatibility info
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Weight | 11.5 kg |
| Seal Material | Rubber, Paper |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.96
Important compatibility info
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Weight | 0.647 kg |
| Additional Information 2 | without screw |
| Placement on Vehicle | Intake Side |
| Number of Teeth | 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.97
Important compatibility info
| Weight | 2.8 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 131 mm |
| Outer diameter | 84 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.99
Important compatibility info
| Outer diameter | 190 mm. 228 mm |
| Thickness | 610 mm. 180 mm |
| Function | Bellow, air suspension |
| External Thread Size | M10 x 1,5, M16 x 2, M22 x 1,5 |
| Type | Bellow, air suspension |
| Weight | 6.0 kg |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.03
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 228 mm. 225 mm |
| Thickness | 153 mm. 410 mm |
| Function | Bellow, air suspension |
| External Thread Size | M12 x 1,5 |
| Weight | 7.3 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.08
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 654 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.9 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.16
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 6 |
| Weight | 0.77 kg |
| for OE number | 23890980 |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.17
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Paired article numbers | 181887 |
| Weight | 3.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 3.0 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181886 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.19
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 6.8 kg |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Brake Disc Thickness | 10 mm |
| Thickness | 10 mm |
| Outer diameter | 270 mm |
| Placement on Vehicle | Rear Axle |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 50.7 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Weight | 8.48 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | perforated/vented, slotted |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.20
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1515 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Weight | 11.7 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.21
Important compatibility info
| Max. Length | 491 mm |
| Piston conrod diameter | 17 mm |
| Weight | 6.84 kg |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 74 mm. 66 mm |
| External Thread Size | M16 x 1,5 |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Min. Length | 335 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Placement on Vehicle | Front Axle, Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.21
Important compatibility info
| Weight | 5.082 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.24
Important compatibility info
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Weight | 8.000 kg |
| Bore Diameter | 42 mm |
| Rod/Strut | Pull Rod |
| Length | 415 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.25
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Min. Length | 619 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 85 mm |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| External Teeth, Wheel Side | 29 |
| Weight | 7.664 kg |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.29
Important compatibility info
| Placement on Vehicle | steered leading axle |
| Length | 1025 mm |
| Additional Information 2 | with crown nut |
| Rod/Strut | Guide Rod |
| Weight | 9.96 kg |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.31
Important compatibility info
| Operating Mode | Electric |
| Voltage | 12 V |
| Height | 85 mm |
| Weight | 1.09 kg |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.34
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Weight | 0.805 kg |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.34
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.296 kg |
| for OE number | 13513995 |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.36
Important compatibility info
| Steering arm type | for control arm |
| Placement on Vehicle | Front Axle Left |
| Type | Ball Joint |
| Function | Ball Joint |
| Extra Description | ProKit |
| Weight | 5.905 kg |
| Thickness | 175 mm |
| External Thread Size | M30 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.38
Important compatibility info
| Weight | 5.4 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 645 mm |
| Min. Length | 405 mm |
| Pipe Diameter | 65 mm. 74 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Weight | 4.44 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber |
| Piston conrod diameter | 15 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Max. Length | 605 mm |
| Min. Length | 364 mm |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£106.41
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023