Proud to be a UK-based company
Contact us
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size 2 | 22 mm |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 185610 |
| Weight | 3.120 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.47
Important compatibility info
| Weight | 1.44 kg |
| Number of Connectors / Ports | 4 |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.53
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| Weight | 0.03 kg |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 100 mm |
| Length | 813 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 17 mm |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
| Weight | 10.443 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.55
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Max. Length | 508 mm |
| Min. Length | 311 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Type | Shock Absorber |
| Weight | 4.75 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.56
Important compatibility info
| Weight | 4.976 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14522 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Paired article numbers | 104660 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Weight | 2.594 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Weight | 4.970 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 14523 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.58
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.62
Important compatibility info
| Stabiliser Diameter | 21 mm |
| Length | 1075 mm |
| Placement on Vehicle | Front Axle |
| Function | Stabiliser Bar, suspension |
| Weight | 4.55 kg |
| Additional Information | with rubber mounts |
| Extra Description | ProKit |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)
£105.63
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 38 |
| Weight | 12.311 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 880 mm |
| Wheel Sided Joint Diameter | 106 mm |
| Transmission-side joint diameter | 108 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 2.400 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 2786.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 139 mm |
| Outer diameter | 139 mm |
| Thickness | 100 mm |
| Inner diameter | 28 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 114 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (185358)
- 1x Febi Nut (185828)
£105.63
Important compatibility info
| Weight | 3.755 kg |
| Additional Information | with lids |
| Length | 750 mm |
| Width | 330 mm |
| Material | PP (Polypropylene) |
| Thickness | 200 mm |
| Pressure | 0.9 bar |
| Function | Expansion Tank, coolant |
| Fill quantity | 11.5 l |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.63
Important compatibility info
| Weight | 1.86 kg |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 150 |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 06B 198 119 A S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24755)
- 1x Febi Water Pump, engine cooling (24358)
£105.64
Important compatibility info
| Operating Mode | Automatic |
| Outer diameter | 65 mm |
| Weight | 2.198 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Vibration | with vibration damper |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Outer diameter | 163 mm |
| Width | 65 mm |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 27 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Weight | 3.1 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 1.28 kg |
| Function | Oil Pump |
| for OE number | 06A 115 105 B S1 |
| Type | Oil Pump |
| Additional Information | with oil pump chain, with chain tensioner |
| Timing Chain Size | G52H |
| Additional Information 2 | with gear |
| Number of Teeth | 50 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33638)
- 1x Febi Chain Tensioner, oil pump drive (33637)
- 1x Febi Oil Pump (22204)
£105.67
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 1.86 kg |
| Function | Seal Kit, multi-valve |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Weight | 3.209 kg |
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Colour | Black |
| Material | Plastic |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023