Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.271 kg |
| Material | NBR (nitrile butadiene rubber), Steel, EPDM (ethylene propylene diene Monomer (M-class) rubber), PTFE (polytetrafluoroethylene) |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.45
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Weight | 2.28 kg |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 130. 58 |
| for OE number | 036 198 119 E S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21772)
- 1x Febi Water Pump, engine cooling (22048)
£110.48
Important compatibility info
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Weight | 10.650 kg |
| Length | 895 mm |
| Additional Information 2 | with crown nut |
| Cone Size | 28.8 mm |
| Adjustable | Adjustable on one side |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.51
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 179339 |
| Number of Connectors / Ports | 6 |
| Weight | 0.7 kg |
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.53
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 5.592 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | both sides, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.53
Important compatibility info
| Weight | 12.73 kg |
| Placement on Vehicle | Front Axle |
| Length | 1570 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Outer diameter | 400 mm |
| Weight | 1.470 kg |
| Spanner Size | 32 |
| Number of Wings | 7 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.721 kg |
| for OE number | 2 009 954 |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.59
Important compatibility info
| Function | Mounting, engine |
| Weight | 2.817 kg |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 5.850 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Yoke |
| Mounting bores distance | 87 mm |
| Max. Length | 540 mm |
| Min. Length | 356 mm |
| Pipe Diameter | 58 mm |
| Piston conrod diameter | 28 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.61
Important compatibility info
| Weight | 0.904 kg |
| Type | Wiper Motor |
| Placement on Vehicle | Rear |
| Voltage | 12 V |
| Function | Wiper Motor |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| External Thread Size | M33 x 3,5 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Length | 265 mm |
| Placement on Vehicle | Front Axle |
| Weight | 5.534 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (104470)
- 1x Febi Bush, kingpin (104182)
- 1x Febi Nut (107297)
- 1x Febi Spacer, kingpin (107308)
- 1x Febi Spacer, kingpin (107309)
- 1x Febi Spacer, kingpin (107310)
- 1x Febi Spacer, kingpin (107311)
- 1x Febi Spacer, kingpin (107314)
- 1x Febi Bush, steering knuckle (107270)
- 1x Febi Seal Ring, steering knuckle (170501)
- 1x Febi Bush, steering knuckle (170502)
- 1x Febi Seal Ring, steering knuckle (170574)
- 1x Febi Pressure Piece, kingpin (171958)
- 1x Febi Pressure Piece, kingpin (172736)
£110.62
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 8.562 kg |
| Number of mounting bores | 6 |
| Min. Length | 669 mm |
| Wheel Sided Joint Diameter | 103 mm |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Seal Material | Rubber |
| Weight | 9.46 kg |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Water pump impeller material | Grey Cast Iron |
| Replaces | 12848 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.65
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| Weight | 9.317 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.66
Important compatibility info
| Weight | 4.48 kg |
| Material | Grey Cast Iron |
| Number of grooves | 12 |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| for OE number | 5 0035 6553 |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.67
Important compatibility info
| Weight | 0.637 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Paired article numbers | 106135 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.68
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.080 kg |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 60 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.6 kg |
| Current Strength | 60 A |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Weight | 4.0 kg |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Length | 872 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Colour | Black |
| Thread Type | with right-hand thread |
| Weight | 8.000 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.72
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 6.597 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.76
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter, Left |
| Type | Sensor, exhaust gas temperature |
| for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 6 |
| Weight | 0.03 kg |
| for OE number | 13 62 7 585 680 |
| Housing Type | without housing |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 17 mm |
| Weight | 10.5 kg |
| Rod/Strut | Guide Rod |
| Length | 449 mm |
| Pipe Diameter | 50 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Rod/Strut | Pull Rod |
| Length | 317 mm |
| Inner diameter | 12 mm |
| Function | Rod/Strut, wheel suspension |
| Type | Rod/Strut, wheel suspension |
| Weight | 0.891 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| Weight | 7.8 kg |
| Cone Size | 30 mm |
| Length | 635 mm |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.87
Important compatibility info
| Weight | 4.37 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 413 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 75 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.90
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1679 mm |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Weight | 16.5 kg |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.91
Important compatibility info
| Width | 286 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Weight | 1.65 kg |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Filter type | Screen Filter |
| Additional Information 2 | with bolts/screws |
| Height | 59 mm |
| Type | Hydraulic Filter, automatic transmission |
| Length | 608 mm |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.93
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| Weight | 9.280 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.94
Important compatibility info
| Weight | 1.8 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.96
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 1.630 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Weight | 6.945 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21302 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.01
Important compatibility info
| Paired article numbers | 174697 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Weight | 5.43 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Weight | 5.43 kg |
| Material | Aluminium |
| Paired article numbers | 174696 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber-metal mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
| Type | Clock Spring, airbag |
| Weight | 0.197 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 300 W |
| Number of Wings | 8 |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Additional Information 2 | with radiator fan shroud |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.18
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.558 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NF (febi 180761 / SWAG 33 10 7602).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.18
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Paired article numbers | 104660 |
| Placement on Vehicle | Right |
| Weight | 2.579 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.20
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 144 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Replaces | 30335 |
| Weight | 1.48 kg |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29533)
- 1x Febi Guide, timing chain (29532)
- 1x Febi Sliding Rail Bolts, timing chain (47398)
- 1x Febi Sliding Rail Bolts, timing chain (47397)
- 2x Febi Screw (47583)
- 1x Febi Sprocket, crankshaft (30458)
£111.21
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 6.96 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 260 mm |
| Thickness | 86.2 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Function | Brake Disc |
| Surface | Oiled |
| Centering Diameter | 52.3 mm |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.21
Important compatibility info
| Weight | 2.37 kg |
| Material | Cast Aluminium |
| Number of grooves | 7 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | with seal ring |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.22
Important compatibility info
| Placement on Vehicle | Front, Left |
| Weight | 4.221 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.34
Important compatibility info
| Placement on Vehicle | Front, Right |
| Weight | 4.314 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.34
Important compatibility info
| Weight | 9.0 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Outer diameter | 273 mm. 227 mm |
| Thickness | 130 mm. 480 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023