Proud to be a UK-based company
Contact us
Important compatibility info
| Thickness | 205 mm |
| Number of Holes | 4 |
| Function | Bush, parabolic spring |
| Length | 220 mm |
| Width | 135 mm |
| Weight | 13.0 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.18
Important compatibility info
| Placement on Vehicle | Left |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.414 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.23
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Weight | 8.1 kg |
| Capacity | 20 l |
| Operating Pressure | 15.5 bar |
| Outer diameter | 206 mm |
| Material | Steel |
| Length | 691 mm |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.25
Important compatibility info
| Weight | 4.42 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| for OE number | 204 326 10 65 S1 |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171133)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 2x Febi Nut (06859)
£110.25
Important compatibility info
| Inner diameter | 15 mm |
| Outer diameter | 55 mm |
| Length | 75 mm |
| Type | Repair Kit, reversing lever |
| Mounting points diameter | 14 mm |
| Additional Information | with counter nut |
| Function | Repair Kit, reversing lever |
| Weight | 4.968 kg |
| Internal Thread Size | M6 x 1 |
| External Thread Size | M30 x 3,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.27
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.680 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| for OE number | 21810-2W200 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.27
Important compatibility info
| Weight | 0.88 kg |
| Type | Vacuum Pump, braking system |
| Function | Vacuum Pump, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.33
Important compatibility info
| Weight | 5.500 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 15694 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.35
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Rear Axle, Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 490 mm |
| Min. Length | 308 mm |
| Pipe Diameter | 54 mm. 63 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 4.8 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20314 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 63.5 mm. 54 mm |
| Mounting points diameter | 20 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 865 mm |
| Min. Length | 495 mm |
| Weight | 4.22 kg |
| External Thread Size | M14 x 1,5 |
| Replaces | 20145 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 5.35 kg |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 16 mm |
| Max. Length | 660 mm |
| Min. Length | 415 mm |
| Function | Shock Absorber |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Max. Length | 834 mm |
| Min. Length | 499 mm |
| Pipe Diameter | 73 mm. 54 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 5.85 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20143 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Min. Length | 380 mm |
| Pipe Diameter | 76 mm. 65 mm |
| Piston conrod diameter | 16 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| External Thread Size | M16 x 1,5 |
| Max. Length | 640 mm |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Weight | 5.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.37
Important compatibility info
| Weight | 0.271 kg |
| Material | NBR (nitrile butadiene rubber), Steel, EPDM (ethylene propylene diene Monomer (M-class) rubber), PTFE (polytetrafluoroethylene) |
| Function | Gasket Set, steering gear |
| Type | Gasket Set, steering gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.45
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Weight | 2.28 kg |
| Type | Water Pump & Timing Belt Kit |
| Number of Teeth | 130. 58 |
| for OE number | 036 198 119 E S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21772)
- 1x Febi Water Pump, engine cooling (22048)
£110.48
Important compatibility info
| Function | Steering Lock |
| Material | Plastic |
| Housing material | Aluminium |
| Weight | 0.570 kg |
| Number of Connectors / Ports | 8 |
| Extra Description | febi Plus |
| Type | Steering Lock |
| Additional Information 2 | with switch, with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Steering Lock (107816)
- 2x Febi Tear-Off Screw, ignition lock (101007)
£110.50
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 5.592 kg |
| Material | Rubber/Metal |
| Placement on Vehicle | both sides, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.53
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Max. Length | 508 mm |
| Min. Length | 311 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Type | Shock Absorber |
| Weight | 4.75 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Outer diameter | 400 mm |
| Weight | 1.470 kg |
| Spanner Size | 32 |
| Number of Wings | 7 |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Weight | 12.73 kg |
| Placement on Vehicle | Front Axle |
| Length | 1570 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 50.8 mm |
| Outer diameter | 90 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 115 mm |
| Function | Wheel Bearing Kit |
| Weight | 3.079 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 79 mm |
| Outer diameter 2 | 139 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.58
Important compatibility info
| Function | Mounting, engine |
| Weight | 2.817 kg |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Extra Description | febi Plus |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.59
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.721 kg |
| for OE number | 2 009 954 |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.59
Important compatibility info
| Paired article numbers | 186141 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with lock nut, with rubber mounts |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.72 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.60
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.73 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.61
Important compatibility info
| Weight | 1.57 kg |
| Seal Material | Rubber |
| Number of grooves | 6 |
| Function | Water Pump, engine cooling |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Additional Information 2 | switchable water pump |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Mounting points diameter | 14 mm |
| Pipe Diameter | 45 mm |
| Max. Length | 429 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Paired article numbers | 188146 |
| External Teeth, Wheel Side | 36 |
| Weight | 5.073 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 627 mm |
| Wheel Sided Joint Diameter | 79 mm |
| Transmission-side joint diameter | 75.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Length | 110 mm |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 58 80 |
| Width | 95 mm |
| Height | 95 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Weight | 2.229 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Additional Information 2 | with nut |
| Function | Drive Shaft |
| Weight | 8.210 kg |
| External Teeth, Wheel Side | 40 |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Thread Size | M10x1,5 |
| Transmission-side joint diameter | 93.5 mm |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 92.2 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 548 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Function | Charge Air Hose |
| Inner diameter | 97 mm |
| Outer diameter | 119 mm |
| Weight | 0.426 kg |
| Type | Charge Air Hose |
| Hose Length | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Weight | 3.9 kg |
| Pipe Diameter | 45 mm |
| Min. Length | 349 mm |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Piston Diameter | 20 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Function | Radiator Hose |
| Additional Information | with quick coupling |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Cooling Hose | from engine to engine cooler |
| Weight | 1.052 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Centre Rod Assembly |
| Weight | 11.460 kg |
| Placement on Vehicle | Front Axle |
| Thread Size | M24 x 1,5 |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Pipe Diameter | 62 mm |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 3 |
| Weight | 0.06 kg |
| Type | Sensor, oil pressure |
| Function | Sensor, oil pressure |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 50 mm |
| Weight | 5.0 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Number of Ribs | 5 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 54 mm |
| Type | Alternator |
| Function | Alternator |
| Weight | 5.5 kg |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 10.290 kg |
| Length | 223 mm |
| Outer diameter | 49.5 mm. 50 mm |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Sealing/Protective Cap (08522)
- 4x Febi Grease Nipple (01094)
- 4x Febi Circlip (03729)
- 4x Febi Lock Ring, steering knuckle (03728)
- 4x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Spacer, kingpin (15758)
- 2x Febi Bush, steering knuckle (08524)
- 4x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Kingpin (03785)
- 2x Febi Bush, kingpin (03789)
- 2x Febi Spacer, kingpin (05007)
- 2x Febi Spacer, kingpin (05008)
- 2x Febi Spacer, kingpin (05009)
- 2x Febi Spacer, kingpin (05010)
- 2x Febi Spacer, kingpin (04997)
- 2x Febi Spacer, kingpin (04998)
- 2x Febi Spacer, kingpin (04999)
- 2x Febi Spacer, kingpin (05000)
- 2x Febi Spacer, kingpin (05001)
£110.62
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.110 kg |
| for OE number | 81.32655.6311 |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 2845 mm |
| Outer length 1 | 3190 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.62
Important compatibility info
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Front |
| Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.63
Important compatibility info
| Weight | 5.9 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm |
| Thickness | 210 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.65
Important compatibility info
| Weight | 0.637 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Paired article numbers | 106135 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.68
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.080 kg |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Weight | 4.0 kg |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 6.597 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.76
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Mounting points diameter | 17 mm |
| Weight | 10.5 kg |
| Rod/Strut | Guide Rod |
| Length | 449 mm |
| Pipe Diameter | 50 mm |
| Steering arm type | Trailing Arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.78
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Surface | Coated |
| Weight | 2.63 kg |
| Number of Teeth | 160 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 03L 198 119 F S1 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37021)
- 1x Febi Water Pump, engine cooling (36048)
£110.84
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023