Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.93 kg |
| Voltage | 12 V |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.38
Important compatibility info
| Weight | 1.75 kg |
| Number of Wings | 8 |
| Material | Cast Aluminium |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Number of mounting bores | 4 |
| Function | Central Slave Cylinder, clutch |
| Weight | 1.986 kg |
| Fill Medium | Mineral Oil |
| Type | Central Slave Cylinder, clutch |
| Additional Information 2 | without sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 4 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 70 A |
| Belt Pulley Diameter | 55 mm |
| Weight | 4.82 kg |
| for OE number | 3140086G00 |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.43
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 646 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber |
| Weight | 5.2 kg |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Replaces | 20436 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.44
Important compatibility info
| Spring Design | Leaf spring |
| Number of spring leaves | 1 |
| Function | Spring Pack |
| Type | Spring Pack |
| Placement on Vehicle | Rear Axle |
| Weight | 13.6 kg |
| Width | 76.2 mm |
| Length | 694 mm. 681 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Placement on Vehicle | transmission sided, Rear |
| Weight | 3.125 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.46
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 22 |
| Rated Power | 1.8 kW |
| Weight | 4.73 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Number of Teeth | 153 |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.832 kg |
| Width | 25 mm |
| Surface | Coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (28107)
- 1x Febi Water Pump, engine cooling (21877)
£125.47
Important compatibility info
| Pressure side external thread size | M12 x 1,5 |
| Type | Door Lock, driver cab |
| Weight | 3.650 kg |
| Thickness | 35 mm |
| Width | 135.41 mm |
| Length | 87.03 mm |
| Placement on Vehicle | Rear |
| Function | Door Lock, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Type | Connecting Rod |
| Weight | 3.49 kg |
| for OE number | 51.02400.6273 |
| Function | Connecting Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Front Axle |
| Width | 115 mm |
| Outer diameter | 127 mm |
| Inner diameter | 68 mm |
| Weight | 6.2 kg |
| Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Weight | 9.44 kg |
| Material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Seal Material | Paper, Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.574 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 580 mm |
| Wheel Sided Joint Diameter | 85.5 mm |
| Transmission-side joint diameter | 60.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Weight | 1.174 kg |
| for OE number | 03C 115 105 T |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Additional Information | with fastening/mounting material |
| Number of Wings | 8 |
| Weight | 3.466 kg |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Weight | 2.940 kg |
| Length | 537 mm |
| Width | 377 mm |
| Material | PP (Polypropylene) |
| Thickness | 219 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with lid |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Cone Size 2 | 25 mm |
| External Thread Size | M14 x 1,5 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181744 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 10.974 kg |
| Cone Size 1 | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Cone Size 1 | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 10.974 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Left, Lower |
| Cone Size 2 | 25 mm |
| External Thread Size | M14 x 1,5 |
| Material | Cast Steel |
| Paired article numbers | 181746 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
Important compatibility info
| Housing length | 291.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Stroke | 214 mm |
| Eject Force | 470 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 537 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023