Proud to be a UK-based company
Contact us
Important compatibility info
| for OE number | 06E 109 465 AS S3 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 74 |
| Chain Type | Simplex, Closed chain |
| Extra Description | Basic Short Kit |
| Weight | 0.661 kg |
| Placement on Vehicle | Right, Upper |
| Additional Information | with chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (39969)
- 1x Febi Tensioner, timing chain (180155)
£141.31
Important compatibility info
| Weight | 16.78 kg |
| Placement on Vehicle | Front Axle |
| Length | 1700 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 52 mm |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.31
Important compatibility info
| Length | 785 mm |
| Width | 280 mm |
| Height | 285 mm |
| Weight | 5.20 kg |
| Colour | Black |
| Function | Oil sump |
| Wet Sump Material | Sheet Steel |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.31
Important compatibility info
| Stabiliser Diameter | 18 mm |
| for OE number | 204 326 06 65 S1 |
| Weight | 4.02 kg |
| Additional Information 2 | with coupling rod |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Placement on Vehicle | Rear Axle |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171139)
- 1x Febi Link/Coupling Rod, stabiliser bar (29695)
- 1x Febi Link/Coupling Rod, stabiliser bar (29694)
- 2x Febi Nut (06859)
- 2x Febi Nut, stabiliser bar (44514)
£141.35
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 53 mm |
| Weight | 6.7 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.43
Important compatibility info
| for OE number | 2 239 508 |
| Function | Camshaft |
| Type | Camshaft |
| Weight | 1.872 kg |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.46
Important compatibility info
| Operating Mode | Manual |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Weight | 2.5 kg |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.58
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Paired article numbers | 41079 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.59
Important compatibility info
| Surface | Coated |
| Brake Disc Thickness | 36 mm |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 395 mm |
| Type | Brake Disc Rotor |
| Weight | 19.5 kg |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 34.4 mm |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Thickness | 66 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Paired article numbers | 180017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.68
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 186565 |
| Colour | Black |
| Weight | 4.5 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.69
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 186564 |
| Colour | Black |
| Weight | 4.5 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.69
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 8.960 kg |
| External Teeth, Diff.Side | 28 |
| Min. Length | 953 mm |
| Wheel Sided Joint Diameter | 91.4 mm |
| Transmission-side joint diameter | 85.4 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.70
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter, exhaust control |
| Weight | 0.17 kg |
| Extra Description | febi Plus |
| Type | Pressure Converter, exhaust control |
| for OE number | 58 51 030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.84
Important compatibility info
| Placement on Vehicle | transmission sided |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Weight | 4.130 kg |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.86
Important compatibility info
| Weight | 0.257 kg |
| Number of Connectors / Ports | 9 |
| Function | Steering Column Switch / Switch, engine brake |
| Type | Steering Column Switch / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£141.88
Important compatibility info
| Weight | 3.10 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 686 mm |
| Min. Length | 411 mm |
| Pipe Diameter | 60 mm. 50 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 910 mm |
| Min. Length | 540 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 19 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
Important compatibility info
| Min. Length | 426 mm |
| Max. Length | 696 mm |
| Mounting points diameter | 24 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Pipe Diameter | 80 mm. 69 mm |
| Weight | 6.2 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 760 mm |
| Min. Length | 460 mm |
| Pipe Diameter | 65 mm. 76 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Piston conrod diameter | 20 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Extra Description | febi Plus |
| Weight | 6.01 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
Important compatibility info
| Function | Shock Absorber |
| Min. Length | 415 mm |
| Pipe Diameter | 73 mm. 64 mm |
| Weight | 6.36 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Max. Length | 650 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 20 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£142.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023