Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 195054 |
| Weight | 3.575 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.79
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 195053 |
| Weight | 3.575 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.79
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 3.043 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£145.98
Important compatibility info
| Function | Shock Absorber |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 745 mm |
| Min. Length | 456 mm |
| Pipe Diameter | 70 mm. 80 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 16 mm |
| Weight | 5.8 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.01
Important compatibility info
| Pipe Diameter | 50 mm. 60 mm |
| Mounting points diameter | 20 mm. 24 mm |
| Max. Length | 705 mm |
| Min. Length | 435 mm |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Piston conrod diameter | 16 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 3.5 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.01
Important compatibility info
| for OE number | 002 091 97 01 |
| Additional Information | with fastening/mounting material |
| Weight | 1.036 kg |
| Operating Mode | Electric |
| Function | Fuel Pump |
| Type | Fuel Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.13
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 60 mm |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Weight | 16.960 kg |
| Length | 1726 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.14
Important compatibility info
| Width | 75 mm |
| Outer diameter | 152 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 7 |
| Parameter | 8PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Weight | 2.708 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.17
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 13 |
| Rated Power | 1.7 kW |
| Weight | 3.18 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.20
Important compatibility info
| Rated Power | 2 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
| Function | Starter |
| Type | Starter |
| Weight | 4.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.22
Important compatibility info
| Parameter | 4PK + 6PK |
| Function | Belt Pulley, crankshaft |
| Width | 58 mm |
| Outer diameter | 194 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 8 |
| Weight | 4.524 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Additional Information 2 | with screw, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (32219)
- 1x Febi Centering Bolt, crankshaft pulley (33612)
- 1x Febi Washer, crankshaft pulley (33587)
£146.22
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.05 kg |
| Housing Type | without housing |
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.22
Important compatibility info
| Weight | 7.3 kg |
| Function | Stabiliser Bar, suspension |
| Type | Stabiliser Bar, suspension |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle |
| Length | 1140 mm |
| Stabiliser Diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.22
Important compatibility info
| Placement on Vehicle | Right |
| Pressure side external thread size | M12 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Function | Tilt Pump, driver cab |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Type | Tilt Pump, driver cab |
| Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.3 kg |
| Paired article numbers | 177798 |
| Operating Mode | Electric |
| Additional Information | with electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 177797 |
| Weight | 1.3 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 177793 |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Weight | 0.662 kg |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 177794 |
| Number of Connectors / Ports | 6 |
| Weight | 0.662 kg |
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with belt pulley |
| Alternator Charge Current | 80 A |
| Belt Pulley Diameter | 49 mm |
| Weight | 4.6 kg |
| Current Strength | 80 A |
| Type | Alternator |
| Function | Alternator |
| for OE number | 5705.KW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023