Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.010 kg |
| Function | Seal, timing chain tensioner |
| Type | Seal, timing chain tensioner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.164 kg |
| Placement on Vehicle | Centre |
| Length | 1643 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
| Replaces | 16922 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.03 kg |
| External Thread Size | M14 x 1,5 |
| Length | 52 mm |
| Material | Brass, Plastic |
| Spanner Size | 19 |
| Colour | White |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Screw length below head | 28 mm |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.102 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Switch Point | 130 °C |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| for OE number | 008 542 45 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.25 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 99 mm |
| Material | Rubber |
| Inner diameter 1 | 22 mm |
| Inner diameter 2 | 84 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17378)
- 1x Febi Clamping Clip (38757)
- 1x Febi Clamping Clip (38765)
- 1x Febi Molybdenum Grease (02582)
£11.09
Important compatibility info
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Weight | 0.38 kg |
| Extra Description | ProKit |
| Type | Ball Joint |
| Additional Information 2 | with retaining ring |
| Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.031 kg |
| Placement on Vehicle | Rear Axle |
| Inner diameter | 60 mm |
| Thickness | 11 mm |
| Outer diameter | 73 mm |
| Function | Shaft Seal, wheel bearing |
| Material | FKM (fluorocarbon rubber) |
| Type | Shaft Seal, wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Spanner Size | 29 |
| Number of Connectors / Ports | 2 |
| Switch Point | 100 °C. 95 °C |
| Function | Temperature Switch, radiator fan |
| Weight | 0.055 kg |
| External Thread Size | M22 x 1,5 |
| Type | Temperature Switch, radiator fan |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Length | 1691 mm |
| Brake Type | Disc Brake |
| Function | Cable Pull, parking brake |
| Weight | 0.370 kg |
| Placement on Vehicle | Left Rear, Right Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.350 kg |
| Length | 138 mm |
| Width | 75 mm |
| Function | Spring Clamp |
| External Thread Size | M14 x 1,5 |
| Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.086 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 206 mm |
| Material | Thermoplast |
| Inner diameter 1 | 12 mm |
| Inner diameter 2 | 54 mm |
| Function | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101694)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38763)
£11.09
Important compatibility info
| Outer diameter | 53 mm |
| Inner diameter | 16 mm |
| Thickness | 50 mm |
| Function | Bush, shock absorber |
| Type | Bush, shock absorber |
| Material | Rubber/Metal |
| Weight | 0.507 kg |
| Width | 105 mm |
| Length | 105 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.330 kg |
| Length | 131 mm |
| Width | 74 mm |
| Function | Spring Clamp |
| Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.38 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Cone Size | 13.7 mm |
| Mounting points diameter | 4.5 mm |
| Function | Ball Joint |
| External Thread Size | M12 x 1,25 |
| Type | Ball Joint |
| Steering arm type | for control arm |
| for OE number | 7081835 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.301 kg |
| Function | Cable Pull, parking brake |
| Length | 1470 mm |
| Placement on Vehicle | Right Rear, Left Rear |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.25 kg |
| Type | Air Filter |
| Function | Air Filter |
| Width | 164 mm |
| Length | 342 mm |
| Height | 41 mm |
| Filter type | Filter Insert |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Weight | 0.13 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, at brake caliper |
| Length | 485 mm |
| Spanner Size | 14, 17 |
| Type | Brake Hose |
| Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.02 kg |
| Material | Rubber |
| Function | Gasket, cylinder head cover |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.240 kg |
| for OE number | 811 419 812 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Thread Type | with right-hand thread |
| Function | Tie Rod End |
| External Thread Size | M14 x 1,5, M10 x 1 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.045 kg |
| Width | 53 mm |
| Length | 70 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.350 kg |
| Placement on Vehicle | Outer, Front Axle Left, Front Axle Right |
| Length | 73 mm |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 84 mm |
| Function | Tie Rod End |
| External Thread Size | M12 x 1,25 |
| Weight | 0.360 kg |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.015 kg |
| Material | Plastic, Metal |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.061 kg |
| Function | Membrane, vacuum pump |
| Type | Membrane, vacuum pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Width | 18 mm. 22 mm |
| Inner diameter | 30 mm |
| Type | Joint Bearing, driver cab suspension |
| Function | Joint Bearing, driver cab suspension |
| Outer diameter | 47 mm |
| Weight | 0.140 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.276 kg |
| Placement on Vehicle | Lower Front Axle, Front |
| Outer diameter | 58 mm |
| Thickness | 56 mm |
| Inner diameter | 14 mm |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.312 kg |
| Placement on Vehicle | Front Axle Left |
| Length | 75 mm |
| Paired article numbers | 08096 |
| Function | Tie Rod End |
| Internal Thread Size | M14 x 2 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Placement on Vehicle | Upper |
| Outer diameter | 35 mm |
| Inner diameter | 27 mm |
| Inner diameter 1 | 31 mm |
| Outer diameter 1 | 40 mm |
| Cooling Hose | from distributor to engine cooler |
| Function | Radiator Hose |
| Weight | 0.19 kg |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Material | Plastic |
| Weight | 0.19 kg |
| Function | Valve, fuel filter |
| Type | Valve, fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, fuel filter (02087)
- 1x Febi Spring pin, fuel filter (40607)
- 2x Febi Clamping Clip (38679)
- 1x Febi Seal, fuel filter (39732)
£11.09
Important compatibility info
| Height | 50 mm |
| Diameter 1 | 37 mm |
| Diameter 2 | 67 mm |
| Opening Temperature | 71 °C |
| Function | Thermostat, coolant |
| Weight | 0.1 kg |
| Type | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Additional Information | with gasket/seal |
| Height | 60.48 mm |
| Weight | 0.043 kg |
| Outer diameter 2 | 47.98 mm |
| Outer diameter 1 | 50.3 mm |
| Inner diameter | 33.77 mm |
| Extra Description | febi Plus |
| Material | Plastic |
| Function | Filter, crankcase ventilation |
| Type | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Function | Brake Hose |
| Weight | 0.1 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 472 mm |
| Spanner Size | 14 |
| External Thread Size | M10 x 1 |
| Internal Thread Size | M10 x 1 |
| Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.067 kg |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 166 mm |
| Material | Thermoplast |
| Inner diameter 1 | 14 mm |
| Inner diameter 2 | 50 mm |
| Type | Bellow Kit, steering |
| Function | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (102066)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38762)
£11.09
Important compatibility info
| Weight | 0.118 kg |
| Function | Wheel Bolt |
| Screw length below head | 40 mm. 77 mm |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 20 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Wheel Fastening | Ball seat A/G |
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 95 mm |
| Material | Steel |
| Outer diameter | 22.5 mm |
| External Thread Size | M12 x 1,5 |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.024 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| External Thread Size | M16 x 1,5 |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Length | 104 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 9 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.24 kg |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.119 kg |
| Type | Bushing, brake shaft |
| Function | Bushing, brake shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Outer diameter | 40.7 mm |
| Thickness | 16.2 mm |
| Inner diameter | 22 mm |
| Colour | Grey |
| Function | Mounting, crankcase ventilation valve |
| Weight | 0.015 kg |
| Type | Mounting, crankcase ventilation valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
| Length | 106 mm |
| Paired article numbers | 04942 |
| Thread Type | with left-hand thread |
| Function | Tie Rod End |
| Weight | 0.314 kg |
| External Thread Size | M16 x 1,5, M10 x 1 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Function | Bushing, brake shaft |
| Type | Bushing, brake shaft |
| Weight | 0.353 kg |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.09
Important compatibility info
| Weight | 0.35 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 91 mm |
| Thickness | 72 mm |
| Spanner Size | 17 |
| Function | Tie Rod End |
| Internal Thread Size | M12 x 1,25 |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.10
Important compatibility info
| Function | Filter, cabin air |
| Length | 438 mm |
| Height | 57 mm |
| Width | 182 mm |
| Filter type | Pollen Filter |
| Type | Filter, cabin air |
| Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.10
Important compatibility info
| Weight | 0.170 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 51 mm. 40 mm |
| Thickness | 37 mm |
| Inner diameter | 12 mm |
| Bearing Type | Spherical Roller Bearing |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.10
Important compatibility info
| Weight | 0.205 kg |
| Placement on Vehicle | Upper |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.10
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right, Front |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| Weight | 0.172 kg |
| Material | Rubber/Metal |
| Outer diameter | 37.6 mm |
| Thickness | 60 mm |
| Inner diameter | 14.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.11
Important compatibility info
| Weight | 0.38 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 285 mm |
| Material | Steel |
| Paired article numbers | 28735 |
| Rod/Strut | Coupling Rod |
| Colour | Black |
| Surface | Painted |
| Thread Length | 21 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,25 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Spanner Size | 17 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.11
Important compatibility info
| Weight | 0.080 kg |
| Material | ACM (Polyacrylate) |
| Outer diameter | 22.5 mm |
| Thickness | 6 mm |
| Inner diameter | 9 mm |
| Function | Seal Ring, cylinder head cover bolt |
| Extra Description | febi Plus |
| Type | Seal Ring, cylinder head cover bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 16x Febi Seal Ring, cylinder head cover bolt (24321)
£11.11
Important compatibility info
| Length from grip collar to max. marking | 523 mm |
| Function | Oil Dipstick |
| Extra Description | febi Plus |
| Type | Oil Dipstick |
| Weight | 0.075 kg |
| Length from grip collar to min. marking | 496 mm |
| Colour | Yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.11
Important compatibility info
| Weight | 0.344 kg |
| Paired article numbers | 10659 |
| Function | Tie Rod End |
| Additional Information | with counter nut |
| Extra Description | ProKit |
| Type | Tie Rod End |
| External Thread Size | M10 x 1,25, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.11
Important compatibility info
| Length | 870 mm |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| DIN / ISO | 7867 |
| Function | V-Ribbed Belt |
| Weight | 0.09 kg |
| Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023