Important compatibility info
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Thickness | 134 mm |
Function | Rubber Buffer, suspension |
Weight | 0.1 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 55 mm |
Width | 61 mm |
Material | Rubber/Metal |
Outer diameter | 60.5 mm |
Thickness | 60 mm |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Weight | 0.13 kg |
Function | Mounting, control/trailing arm |
Inner diameter | 12 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.238 kg |
Placement on Vehicle | Front Axle |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (09225)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
Important compatibility info
Weight | 0.04 kg |
Outer diameter | 65 mm |
Thickness | 11.3 mm |
Inner diameter | 50 mm |
Type | Seal Ring, charger |
Function | Seal Ring, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.103 kg |
for OE number | 541 010 16 21 |
Type | Gasket Set, cylinder head cover |
Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (28685)
- 1x Febi Gasket, intake manifold (21911)
- 1x Febi Gasket, exhaust manifold (30615)
Important compatibility info
Function | Gasket, exhaust manifold |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.458 kg |
External Thread Size | M10 x 1,5 |
Placement on Vehicle | Front Axle Left |
Length | 110 mm |
Spanner Size | 15 |
Paired article numbers | 106865 |
Function | Tie Rod End |
Internal Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Outer diameter | 148 mm |
Inner diameter | 95 mm |
Filter type | Filter Insert |
Type | Air Filter |
Height | 220 mm |
Weight | 0.480 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.05 kg |
Length | 103.8 mm |
Valve head diameter | 31.27 mm |
Notches / Holes Number | 1 |
Type | Intake Valve |
Function | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 34 mm. 43 mm |
Weight | 0.097 kg |
Placement on Vehicle | Rear Axle Lower, both sides, outer |
Material | Rubber/Metal |
Thickness | 30 mm |
Inner diameter | 14 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.156 kg |
Length | 1183 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 8 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear, Left Rear |
Length | 1493 mm |
Function | Cable Pull, parking brake |
Weight | 0.30 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
for OE number | 030 103 483 K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.335 kg |
Placement on Vehicle | Front Axle, transmission sided |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 70 mm |
Material | Rubber |
Inner diameter 1 | 24 mm |
Length | 112 mm |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (17124)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38757)
- 1x Febi Circlip (05336)
- 1x Febi Molybdenum Grease (08414)
Important compatibility info
Placement on Vehicle | Rear Axle, Front |
Width | 28 mm. 34 mm |
Outer diameter | 34 mm |
Inner diameter | 12 mm |
Function | Mounting, control/trailing arm |
Weight | 0.09 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.504 kg |
External Thread Size | M14 x 1,5 |
Length | 215 mm |
Width | 74 mm |
Function | Spring Clamp |
Type | Spring Clamp |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
Placement on Vehicle | Front Axle Left, inner, Lower, Front Axle Right |
Function | Ball Joint |
External Thread Size | M14 x 1,5 |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.234 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Metal |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.290 kg |
Function | Filter, cabin air |
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Width | 195 mm |
Height | 38 mm |
Length | 263 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 73 mm |
Thickness | 10 mm |
Inner diameter | 53 mm |
Function | Shaft Seal, wheel hub |
Weight | 0.002 kg |
Type | Shaft Seal, wheel hub |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Function | Suspension Strut Support Mount |
Weight | 0.214 kg |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | without ball bearing, with fastening material |
Weight | 0.5 kg |
Placement on Vehicle | Front Axle |
Material | Rubber/Metal |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (08619)
- 1x Febi Rolling Bearing, suspension strut support mount (01111)
- 1x Febi Threaded Sleeve, suspension strut (14099)
Important compatibility info
Placement on Vehicle | frontal sided |
Width | 10 mm |
Material | PTFE (polytetrafluoroethylene) |
Outer diameter | 48 mm |
Inner diameter | 35 mm |
Function | Shaft Seal, crankshaft |
Weight | 0.01 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Weight | 0.595 kg |
External Thread Size | M16 x 1,5 |
Function | Ball Joint |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with retaining ring |
Steering arm type | for control arm |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.095 kg |
Number of Connectors / Ports | 2 |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Inner diameter | 69 mm |
Height | 237 mm |
Outer diameter | 121 mm |
Weight | 0.300 kg |
Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Diameter | 70 mm |
Weight | 0.43 kg |
Type | Fuel filter |
Filter type | Spin-on Filter, with water separator |
Height | 152 mm |
Outer diameter | 85 mm |
Function | Fuel filter |
Internal Thread Size | M10 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Joint Type | Tripod Joint |
Weight | 0.21 kg |
Placement on Vehicle | Front Axle, transmission sided |
Length | 102 mm |
Material | Rubber |
Inner diameter 2 | 76 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01047)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38757)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.02 kg |
Placement on Vehicle | frontal sided |
Width | 7 mm |
Outer diameter | 65 mm |
Function | Shaft Seal, camshaft |
Colour | Brown |
Inner diameter | 51 mm |
Type | Shaft Seal, camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.317 kg |
Height | 115 mm |
Width | 95 mm |
Port / Connector type | DIN Connector |
Fastening Type | 3-point attachment |
DIN / ISO | 72591 |
Number of circuits | 2 |
Type | Holder, rotating beacon |
Function | Holder, rotating beacon |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.191 kg |
Placement on Vehicle | Front Axle, transmission sided |
Length | 105 mm |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Inner diameter 1 | 28 mm |
Inner diameter 2 | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45641)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower, Rear |
Width | 118 mm |
Outer diameter | 59 mm |
Thickness | 51 mm |
Inner diameter | 21 mm. 9 mm |
Paired article numbers | 19457 |
Function | Mounting, control/trailing arm |
Weight | 0.460 kg |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Height | 44 mm |
Width | 175 mm |
Filter type | Filter Insert |
Weight | 0.42 kg |
Type | Air Filter |
Length | 301 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Weight | 0.273 kg |
Length | 93 mm |
Material | Steel |
Outer diameter | 12.7 mm |
Thickness | 68 mm |
Thread Length | 16.7 mm. 63 mm |
Thread Type | with left-hand thread |
Function | Tie Rod End |
External Thread Size | M10 x 1, M14 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with pre-filter |
Length | 240 mm |
Height | 49 mm |
Width | 205 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Inner diameter | 70 mm |
Outer diameter | 85 mm |
Material | FPM (fluoride rubber) |
Width | 7.5 mm |
Placement on Vehicle | frontal sided |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.3656 kg |
Length | 259 mm |
Height | 76 mm |
Width | 209 mm |
Additional Information 2 | with pre-filter |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Door Handle, interior equipment |
Type | Door Handle, interior equipment |
Colour | Black |
Weight | 0.8 kg |
Paired article numbers | 175448 |
Material | Plastic |
Placement on Vehicle | Interior Door Panel, Front, Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 120 mm |
Thickness | 69 mm |
Spanner Size | 19 |
Function | Tie Rod End |
Weight | 0.37 kg |
Internal Thread Size | M12 x 1,25 |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Tie Rod End |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.27 kg |
Inner diameter | 12 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, control/trailing arm |
Placement on Vehicle | Rear Axle Left, Front, Outer, Rear Axle Right |
Outer diameter | 43 mm |
Thickness | 47 mm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Door Handle, interior equipment |
Type | Door Handle, interior equipment |
Weight | 0.85 kg |
Material | Plastic |
Colour | Black |
Paired article numbers | 175447 |
Placement on Vehicle | Interior Door Panel, Front, Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.100 kg |
Number of Ribs | 5 |
Function | V-Ribbed Belt |
Length | 1180 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 50 mm |
Inner diameter | 18.4 mm |
Outer diameter | 55 mm |
Type | Mounting, control/trailing arm |
Weight | 0.230 kg |
Function | Mounting, control/trailing arm |
Material | Rubber/Metal |
Placement on Vehicle | Front, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Right |
Material | Plastic |
Colour | Black |
Weight | 0.1 kg |
Type | Exterior Door Handle |
Function | Exterior Door Handle |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 38.5 mm |
Inner diameter | 14 mm |
Weight | 0.136 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 35 mm |
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.035 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 72 mm. 77 mm |
Thickness | 11.1 mm |
Inner diameter | 48 mm |
Material | Steel |
Function | Sensor Ring, ABS |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Accessory Kit, brake shoes |
Type | Accessory Kit, brake shoes |
Weight | 0.059 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.165 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 480 mm |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Type | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.393 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 80 mm |
Material | Rubber/Metal |
Inner diameter | 12.2 mm |
Function | Bush, spring eye |
Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 61.5 mm |
Width | 61 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.3 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Weight | 0.797 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023