Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Commercial Vehicle Com Veh eng oil -- synthetic

Castrol Vecton Long Drain 10W-40 E6/E9 is a full synthetic low SAPS engine oil formulated with unique System 5 TechnologyTM for up to 40% better performance1. It is also engineered for extended oil drain up to 100,000km2 in the latest European diesel engines including Euro 6 and engines fitted with DPF, in accordance with OEM specifications.

Application
Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Advantages

Modern engines operate in constantly changing conditions which impacts engine performance. Castrol Vecton Long Drain 10W-40 E6/E9's unique System 5 TechnologyTM adapts to these changing conditions to help maximise engine performance. It provides exceptional resistance to contaminants and delivers outstanding performance when you run extended drains, even under severe operating conditions.

System 5 TechnologyTM helps to maximise engine performance throughout extended drain intervals:

• Fights harmful acids which form during engine operation, maintaining TBN reserve throughout the oil drain
• Fights wear to critical engine components
• Fights piston deposits even under severe operating conditions.

Castrol Vecton Long Drain10W-40 E6/E9 is approved by Mercedes Benz, Renault, Volvo and Deutz for oil drain up to 100,000 Km2, in accordance with their specifications.

1. In independent laboratory tests, Castrol Vecton Long Drain 10W-40 E6/E9 performed up to 40% better than API and ACEA industry standard limits across oil thickening, piston deposits, soot handling and wear and corrosion.

2. Actual oil drain depends on engine type, operating conditions, service history, use of on-board diagnostics and fuel quality. Always consult your manufacturer's handbook.

Product Performance Claims

• ACEA E6, E7, E9
• API CJ-4
• JASO DH-2
• CAT ECF-3
• Cummins CES 20081
• Deutz DQC IV-10LA
• Mack EO-O Premium Plus, EOS-4.5
• MB-Approval 228.51
• MTU Oil Category 3.1
• RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5
• Meets requirements of MAN M 3271-

• It is suitable for highly rated diesel engines meeting Euro I to Euro VI emission requirements
• It is strongly recommended for engines fitted with particulate filters and is designed for use in combination with low sulphur diesel fuel
• Castrol VECTON Long Drain with System Pro Technology is specifically engineered and tested for extended drains up to 120,000 km*.

• ACEA E6, E7, E9, API CJ-4
• JASO DH-2, CAT ECF-3, Cummins CES 20081, Deutz DQC IV-10LA, Mack EO-O Premium Plus, EOS-4.5, MB-Approval 228.51, MTU Oil Category 3.1, RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5, Meets requirements of MAN M 3271-1, M 3477
• For Iveco trucks requiring ACEA E6, E7 and E9, Meets DAF Euro VI requirements

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC's unique formulation protects from the moment you start, dramatically reducing* engine wear. Now with ultra-refined molecules, for protection you can see, hear and feel. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test

Castrol MAGNATEC 5W-30 DX is suitable for use in automotive gasoline engines where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant. Castrol MAGNATEC 5W-30 DX is approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant. Dexos1 Gen3 is backwards compatible with previous generation dexos1.

• Suitable for use where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant
• Approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant
• Delivers superior performance under extreme cold start-up conditions relative to thicker grades
• Provide continuous protection for all driving conditions, styles and temperatures

Specifications

• API SP
• ILSAC GF-6
• Meets Ford WSS-M2C946-A/ WSS-M2C946-B1/ WSS-M2C961-A1
• GM dexos1(TM) Gen 3

• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

• Performance: API SP ILSAC GF-6
• GM dexos1™ Gen 3
• OPEL OV 040 1547 - G30

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect.
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Deliver protection designed specifically for modern driving
• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic