invoice Page 8 of 39
Results 71 - 80 of 384
Part number: KCE001
Type Engine Oil
Specification API SL
Capacity 1 l
Packing Type Bottle
SAE Viscosity 15W-40
Extra Description Carlube Triple R 15W-40 API SL R-Tec 36
Oil Specification API SL
Oil Viscosity Classification SAE 15W-40
Oil Mineral Oil
Function Engine Oil

Additional Information

Carlube Triple R 15W-40 R-Tec 36 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 15W-40 R-Tec 36 is Suitable for gasoline engines providing excellent protection and preventing engine wear during startup. Recommended for light-duty service and moderate oil drains.
Triple R 15W-40 R-Tec 36 also provides good sludge control & excellent high-temperature deposit control and is a low-cost oil for basic API SL performance

Carlube KCE001 Engine Oil 1L
ONLY
£14.84
Quantity:
Part number: U245S1L
Title Exopro 5W30 Gm D1 Fs - 1 Litre

Additional Information

A high performance fully synthetic engine oil suitable for use in a wide range of modern petrol engines
  • Reduces turbocharger deposits
  • Provides high performance with fuel efficiency
  • Reduces sludge and improves engine cleanliness
  • Significantly reduces low speed pre-Ignition
  • API SP, SP-RC, SN PLUS, SN, GM dexos1™ Gen 2, ILSAC GF-5
ExoPro U245S1L Engine Oil 1L
ONLY
£14.87
Quantity:
Part number: 872770
Function Engine Oil
ACEA specification C4
Type Engine Oil
SAE Viscosity 5W-30
Packing Type Bottle
Oil Full Synthetic Oil
Grade Multigrade
Oil Specification Mercedes MB 226.51, Renault RN0720
Manufacturer Release MB 226.51, RENAULT RN 0720
Title Valvoline Synpower Mst C4 5W30 - 1 Litre
Volume 1 L
Extra Description SynPower™ MST C4 5W-30
Capacity 1 L
Key Words SynPower; MST; Synthetic

Additional Information

SynPower is a premium grade engine oil that provides superior performance and is formulated to fulfil the latest standards of leading engine manufacturers. It is designed with state-of-the-art technologies to meet the demands of next-generation technology engines with reduced fuel consumption, lower emissions, and extended maintenance intervals. For more specific information certificates and performance grades, please see the Approvals and Performance level sections at the top of the respective SynPower motor oil product’s information sheet available on the links below. The special formula of the SynPower engine oil provides ultimate engine protection. Through the use of advanced additives, SynPower keeps the engine clean from harmful sludge and deposits. Excellent product stability and highest quality base oils and additives ensure long-lasting performance under all operating conditions. Moreover, instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition. In addition, low viscosity grades in combination with specialised additives provide a maximal reduction of friction. Valvoline SynPower motor oil product line is the result of Valvoline’s drive for innovation. Ever since its inception in 1866, Valvoline has been on the leading edge of engine oil technology. By constantly innovating and reinventing motor oil formulas for racing, high kilometre vehicles, synthetics, and other applications, Valvoline proved their passion for extracting the best performance from each car. That is how the SynPower motor oils were created. As one of the lower viscosity (lighter) oils, Valvoline SynPower special oil formulas with friction modifiers and special additives help to improve or restore horsepower and maintain engine durability. For 150 years Valvoline has been on the leading edge of lubricants technology. From creating X-18 engine oil in 1939, to high performance racing oil in 1965 to MaxLife high kilometre oil in 2000, Valvoline has innovated to provide owners with quality products that maximize engine care. Today, Valvoline operates a global network of research and development labs, distribution and customer services in 140 countries. Beyond industry-leading products, Valvoline offers increasing global brand strength and innovative tools that make Valvoline a valuable partner with installers, dealers, retailers, equipment manufacturers and business operators. Valvoline is proud to have been the only engine
  • Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
  • Formulated for excellent product stability. Long lasting performance and suitable for long drain intervals
  • Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
  • SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
  • OEM approved premium grade motor oil
  • Approved: Renault RN0720 Meets: ACEA C4
  • MB 229.51, Meets requirements of some models of Nissan* and Suzuki*.
Valvoline 872770 Engine Oil 1L
ONLY
£14.93
Quantity:
Part number: N2391L
API specification SN/CF
Volume 1 L
Function Engine Oil
SAE Viscosity 0W-30
Oil Specification BMW LONGLIFE-01 FE, VOLVO VCC 95200377
Grade Multigrade
ACEA specification A5/B5
Type Engine Oil
Capacity 1 L
Packing Type Bottle
Extra Description NAPA VT 0W-30 ECO
Specification BMW LONGLIFE-01 FE, VOLVO VCC 95200377
Key Words VT; ECO; LL; LongLife; Synthetic
Title Napa VT 0W-30 ECO (1L)

Additional Information

  • Unsurpassed levels of engine protection
  • Peak performance throughout even the longest service intervals
  • Fuel economy savings
  • Improved performance
  • Exceptional low temperature properties
  • ACEA A5/B5, API SL/CF
  • VOLVO VCC 95200377, BMW LONGLIFE-01 FE
NAPA N2391L Engine Oil 1L
ONLY
£15.08
Quantity:
Part number: U225S1L
Title Exopro 5W30 Xtr - 1 Litre

Additional Information

A high performance low SAPS engine oil suitable for use in a wide variety of modern petrol and diesel engines
  • Provides protection for diesel particulate filters and catalytic converters
  • Covers Longlife III applications
  • Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
  • A highly versatile low SAPS engine oil for ACEA C3 applications
  • ACEA C3, API SN, VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30
ExoPro U225S1L Engine Oil 1L
ONLY
£15.13
Quantity:
Part number: N2021L
Volume 1 L
Capacity 1 L
ACEA specification A3/B3, A3/B4
Type Engine Oil
Extra Description NAPA 15W-40 PREMIUM
SAE Viscosity 15W-40
Title Napa 15W-40 PREMIUM (1L)
Specification MB-229.1, VW 505.00
Packing Type Bottle
Oil Specification Mercedes MB-229.1, VW 505.00
Grade Multigrade
Function Engine Oil
API specification SL, CF
Key Words Premium; Mineral

Additional Information

  • Provides ultimate engine protection for all driving conditions
  • Excellent sludge control for stop-go city motoring
  • Blended with the latest additive technology
  • Excellent high temperature stability
  • API SL/CF, ACEA A3/B4, A3/B3
  • MB-229.1, VW 505.00
NAPA N2021L Engine Oil 1L
ONLY
£15.26
Quantity:
Part number: 15F9C9
Type Engine Oil
Function Engine Oil
Packing Type Bottle
Manufacturer Release Ford WSS-M2C948-B
Oil Synthetic Oil
Capacity 1 l
SAE Viscosity 5W-20
Extra Description Castrol Magnatec 5W-20 E
Oil Viscosity Classification SAE 5W-20
Title CASTROL MAGNATEC 5W-20 E - 1L
Oil Specification Ford WSS-M2C948-B
Volume 1 L
Grade Multigrade
Key Words Magnatec; Synthetic
Specification ACEA Light Duty C5, API Gasoline SN, ILSAC GF-5

Additional Information

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

  • Form a powerful force field of protection
  • Dramatically reduce both warm-up and stop-start wear by 50%
  • Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC: Non-stop protection from every start.

Application

Castrol Magnatec 5W-20 E is a fully synthetic lubricant suitable for use vehicles that require a 5W-20 lubricant that Meets Ford WSS-M2C948-B specification.

Product Performance Claims

  • Approved - Ford WSS-M2C948-B
  • Deliver unique protection designed specifically for modern driving
  • Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
  • Castrol MAGNATEC: Non-stop protection from every start.
  • Approved - Ford WSS-M2C948-B
Castrol 15F9C9 Engine Oil 1L
ONLY
£15.30
Quantity:
Part number: U224S1L
Title Exopro 5W30 C3, C4 - 1 Litre

Additional Information

A high performance low SAPS engine oil suitable for use in a wide variety of modern petrol and diesel engines
  • Backwards compatible to older Renault models
  • Provides high performance with fuel efficiency
  • Provides protection for diesel particulate filters and catalytic converters
  • Designed specifically for modern Nissan & Renault diesel vehicles
  • ACEA C3, C4, RENAULT RN0720, MB 226.51, 229.51
ExoPro U224S1L Engine Oil 1L
ONLY
£15.30
Quantity:
Part number: 892443
SAE Viscosity 5W-30
Capacity 1 L
Packing Type Bottle
Function Engine Oil
Title Valvoline Hybrid C2 5W30 - 1 Litre
Grade Multigrade
Type Engine Oil
Extra Description Hybrid C2 5W-30
Volume 1 L
ACEA specification C2
API specification SL, SM, SN, SP
Oil Full Synthetic Oil
Key Words Hybrid; Synthetic

Additional Information

  • Low Speed pre-ignition protection incorporated
  • Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C2, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade.
  • Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
  • Excellent water tolerance and separation capability to prevent sludge forming
  • Enhanced soot control to prevent premature oil degradation
  • Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
  • Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
  • Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv
  • Meets: ACEA: C5
  • API: SN, SP
Valvoline 892443 Engine Oil 1L
ONLY
£15.30
Quantity:
Part number: 15F7CA
Manufacturer Release FIAT 9.55535-D2, MB 229.3, Renault RN 0700, Renault RN 0710, VW 501 01, VW 501.01, VW 505 00, MB 226.5
Function Engine Oil
Extra Description Castrol Magnatec 10W-40 A/B
Oil Part Synthetic Oil
Type Engine Oil
Oil Viscosity Classification SAE 10W-40
SAE Viscosity 10W-40
Capacity 1 l
Specification ACEA Light Duty A3/B, API Gasoline SP
Packing Type Bottle
Title CASTROL MAGNATEC 10W-40 A/B - 1L
Oil Specification Mercedes MB 226.5/ 229.3; Renault RN0700 / RN0710; VW 501 01/ 505 00; FIAT 9.55535-D2
Volume 1 L
ACEA specification A3/B4
API specification SP
Grade Multigrade
Key Words Magnatec; A/B

Additional Information

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

  • Form a powerful force field of protection
  • Dramatically reduce both warm-up and stop-start wear by 50%
  • Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 10W-40 A/B is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP 10W-40 lubricant. Castrol MAGNATEC 10W-40 A/B is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Product Performance Claims

  • ACEA A3/B4
  • API SP
  • Meets - Fiat 9.55535-D2
  • MB-Approval 229.3
  • VW 501 01/ 505 00
  • Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect..
  • DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
  • Deliver protection designed specifically for modern driving
  • Castrol MAGNATEC. Non-stop protection from every start.
  • ACEA A3/B4, API SP
  • MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2
Castrol 15F7CA Engine Oil 1L
ONLY
£15.38
Quantity:

Page 8 of 39
Engine Oils

Your feedback more
Trusted reviews more
Secure payments more
Simple returns more