Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Carlube Triple R 5W-20 R-Tec 15 is a fully synthetic engine oil developed to provide enhanced engine and catalyst protection, as well as improved fuel efficiency for modern engines requiring a low viscosity engine oil.

Triple R 5W-20 R-Tec 15 delivers excellent performance in both engine protection and cleanliness. It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel efficiency and ethanol fuel compatibility.

Technical Information

Engine oils: Commercial Vehicle Com Veh eng oil -- synthetic

Castrol Vecton Long Drain 10W-40 E6/E9 is a full synthetic low SAPS engine oil formulated with unique System 5 TechnologyTM for up to 40% better performance1. It is also engineered for extended oil drain up to 100,000km2 in the latest European diesel engines including Euro 6 and engines fitted with DPF, in accordance with OEM specifications.

Application
Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Advantages

Modern engines operate in constantly changing conditions which impacts engine performance. Castrol Vecton Long Drain 10W-40 E6/E9's unique System 5 TechnologyTM adapts to these changing conditions to help maximise engine performance. It provides exceptional resistance to contaminants and delivers outstanding performance when you run extended drains, even under severe operating conditions.

System 5 TechnologyTM helps to maximise engine performance throughout extended drain intervals:

• Fights harmful acids which form during engine operation, maintaining TBN reserve throughout the oil drain
• Fights wear to critical engine components
• Fights piston deposits even under severe operating conditions.

Castrol Vecton Long Drain10W-40 E6/E9 is approved by Mercedes Benz, Renault, Volvo and Deutz for oil drain up to 100,000 Km2, in accordance with their specifications.

1. In independent laboratory tests, Castrol Vecton Long Drain 10W-40 E6/E9 performed up to 40% better than API and ACEA industry standard limits across oil thickening, piston deposits, soot handling and wear and corrosion.

2. Actual oil drain depends on engine type, operating conditions, service history, use of on-board diagnostics and fuel quality. Always consult your manufacturer's handbook.

Product Performance Claims

• ACEA E6, E7, E9
• API CJ-4
• JASO DH-2
• CAT ECF-3
• Cummins CES 20081
• Deutz DQC IV-10LA
• Mack EO-O Premium Plus, EOS-4.5
• MB-Approval 228.51
• MTU Oil Category 3.1
• RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5
• Meets requirements of MAN M 3271-

• It is suitable for highly rated diesel engines meeting Euro I to Euro VI emission requirements
• It is strongly recommended for engines fitted with particulate filters and is designed for use in combination with low sulphur diesel fuel
• Castrol VECTON Long Drain with System Pro Technology is specifically engineered and tested for extended drains up to 120,000 km*.

• ACEA E6, E7, E9, API CJ-4
• JASO DH-2, CAT ECF-3, Cummins CES 20081, Deutz DQC IV-10LA, Mack EO-O Premium Plus, EOS-4.5, MB-Approval 228.51, MTU Oil Category 3.1, RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5, Meets requirements of MAN M 3271-1, M 3477
• For Iveco trucks requiring ACEA E6, E7 and E9, Meets DAF Euro VI requirements

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Drivers and mechanics have trusted Castrol GTX for over 50 years to help extend engine life. Castrol GTX's 3X-Clean formula has been developed to fight the three main causes of engine sludge: heat, contaminants and short trips. By cleaning away existing sludge and creating a barrier that helps stop deposits from forming, Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards. This means drivers and their vehicles enjoy more years together. Castrol GTX: helps extend engine life

Application

Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specification 5W-30 lubricant.

Advantages

• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown.
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives

Performance

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

• Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specifcation 5W-30 lubric
• 5w-30
• Petrol & diesel
• ACEA C3 MB-Approval 226.2 Renault RN 17
• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol MAGNATEC 0W-30 D is suitable for use in vehicles that require a 0W-30 lubricant that Meets Ford WSSM2C950-A specification.

Product Performance Claims

• ACEA C2
• Meets Ford WSS-M2C950-A

• Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2 Meets - Ford WSS-M2C950-A VWC 53035

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in non-hybrid engines that require an ACEA: C5, API: SP and API: SN engine oil in the SAE 0W-20 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency.
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

• Stronger under pressure in today’s modern engines
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE 0W-20 C5 delivers against HYSPEC, Castrol’s new hybrid performance standard**.
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C5, C6, API SP, ILSAC GF-6
• GM dexos1 Gen 3, Jaguar Land Rover engine oil specification STJLR.03.5006, MB-Approval 229.71
• OPEL OV0401547 - A20, Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1, Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A / Meets Ford WSS-M2C947-B1 / Meets Ford WSS-M2C962-A1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A3/B4, API SP
• BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00/ 505 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.3

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC's unique formulation protects from the moment you start, dramatically reducing* engine wear. Now with ultra-refined molecules, for protection you can see, hear and feel. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test

Castrol MAGNATEC 5W-30 DX is suitable for use in automotive gasoline engines where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant. Castrol MAGNATEC 5W-30 DX is approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant. Dexos1 Gen3 is backwards compatible with previous generation dexos1.

• Suitable for use where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant
• Approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant
• Delivers superior performance under extreme cold start-up conditions relative to thicker grades
• Provide continuous protection for all driving conditions, styles and temperatures

Specifications

• API SP
• ILSAC GF-6
• Meets Ford WSS-M2C946-A/ WSS-M2C946-B1/ WSS-M2C961-A1
• GM dexos1(TM) Gen 3

• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

• Performance: API SP ILSAC GF-6
• GM dexos1™ Gen 3
• OPEL OV 040 1547 - G30

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect.
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Deliver protection designed specifically for modern driving
• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 LL IV is suitable for use in gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in gasoline and diesel engines in vehicles from the VW Group that require a VW 508 00 / 509 00 specification 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE 0W-20 LL IV with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-20 LL IV:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00
• Meets - Ford WSS-M2C956-A1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Delivers low foam performance
• Recommended by world-leading car manufacturers
• Independently tested at the highest standards for proven performance
• Reduces power-robbing friction across engine speeds and conditions
• Transforms to be strongest when the pressure is highest, protecting your engine
• Suitable for use in everyday high-performance vehicles, Castrol EDGE SUPERCAR is proof that our oils are tested to the limits.

• ACEA A3/B3, A3/B4, API SN/CF
• Approved for BMW M-Models, VW 501 01/ 505 00

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where JASO MA or MA2 are recommended.
• Castrol POWER1 ULTIMATE’s 5-in-1 formula delivers:
• 1. Excellent acceleration
• 2. Excellent protection
• 3. Smooth riding
• 4. Keeps the engine cool on long rides
• 5. Enduring performance Complies with requirements of catalyst equipped engines. Acceleration benefits will be subject to riding style and oil viscosity grade

• Performance- API SL JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 V is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C5 0W-20 lubricant

Castrol EDGE 0W-20 is approved for use in Volvo vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook

Advantages

Castrol EDGE 0W-20 V with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Volvo VCC RBS0-2AE

• Castrol EDGE 0W-20 V is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5 0W-20 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C5, Volvo VCC RBS0-2AE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Castrol EDGE 5W-30 LL is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3 5W-30 lubricant
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Product Performance Claims: ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: VW 505 00/ 505 01

• Provides ultimate engine protection for all driving conditions
• Excellent sludge control for stop-go city motoring
• Blended with the latest additive technology
• Excellent high temperature stability

• ACEA A3/B3, A3/B4, E2, API SL/CH-4, CF, VW 505.00, MB 228.1, 229.1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Castrol EDGE 5W-40 is suitable for petrol and diesel cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SN/CF or earlier specification 5W-40 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• Performance: ACEA C3 API SN/CF
• MB-Approval 226.5/ 229.31/ 229.51
• OPEL OV 040 1547 - D40
• Renault RN0700 / RN0710
• VW 505 00/ 505 01
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Castrol EDGE 5W-30 M is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SP or earlier specification 5W-30 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Delivers more horsepower and greater acceleration to get you more metres ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C3 API SP
• BMW Longlife-04
• MB-Approval 229.51/ 229.52
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31