Engine Oils

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A3/B4, API SP
• BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00/ 505 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.3

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30,VW 504 00/ 507 00

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits. Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-12 FE Meets: ACEA C2

Carlube Triple R 0W-20 R-Tec 6 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-20 R-Tec 6 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles. They provide exceptional fuel economy particularly in 0W-16 as well as 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 LL IV is suitable for use in gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in gasoline and diesel engines in vehicles from the VW Group that require a VW 508 00 / 509 00 specification 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE 0W-20 LL IV with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-20 LL IV:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00
• Meets - Ford WSS-M2C956-A1

• Castrol EDGE 0W-20 LL IV is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance

• ACEA C3, API SN/CF
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, GM dexos2, MB-Approval 226.5/ 229.31/ 229.51, Renault RN 0700 / RN 0710, VW 505 00/ 505 01

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

•  ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145
• ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3, API SN PLUS
• BMW Longlife-04, MB-Approval 229.31/ 229.51/ 229.52

Technical Information

Engine oils: Motorcycle Motorcycle 2T eng oil -- Synthetic Technology

• Castrol POWER1 Scooter 2T with:
• Power Sustain Formula keeps engine clean
• Excellent high temperature detergency
• Compatible with modern catalytic converters
• Low-ash formulation helps to reduce spark plug fouling

• Performance ISO-L-EGD JASO FD

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in non-hybrid engines that require an ACEA: C5, API: SP and API: SN engine oil in the SAE 0W-20 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency.
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Protects GDI (Gasoline Direct Injection) engine from Low-Speed Pre-Ignitions (LSPI)
• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and GPF (Gasoline Particulate Filter)
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SP, SN Plus RC (Resource Conserving)
• Ford WSS-M2C962-1A
• ILSAC GF-6, GF-6

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T with Power Sustain Technology(TM) is designed specifically for bikers who love the exhilaration of riding New Castrol POWER1 4T with Power Sustain Technology(TM) manages heat and friction, ensuring continuous power delivery and provides on-demand acceleration.

Application

Castrol POWER1 4T 15W-50 is designed to manage heat & friction to provide sustained power delivery and on-demand acceleration. It is suitable for all 4-stroke motorcycle engines, both carburetor and fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Manages heat and friction in the engine, to ensure continuous power delivery and gives on-demand acceleration. It is specially formulated to suit long riding conditions.
• New POWER1 4T 15W-50 resists oil thickening caused by high temperatures
• New POWER1 4T 15W-50 maintains your bikes performance during long rides.
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SN
• JASO MA2

Carlube Triple R 0W-30 R-Tec 9 has advanced additive technology that provides powerful detergency and the ability to prevent the build-up of piston deposits, allowing the lubricant to meet the stringent demands and exacting requirements of the VW 504.00/507.00 specification.

This engine oil is designed to lubricate high power modern based engines.
The formulation maintains a good lubricant flow throughout the engine enhancing the lubrication of all engine parts whilst also preventing wear. Provides excellent engine durability as well as giving fuel economy benefits

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

• Stronger under pressure in today’s modern engines
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE 0W-20 C5 delivers against HYSPEC, Castrol’s new hybrid performance standard**.
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C5, C6, API SP, ILSAC GF-6
• GM dexos1 Gen 3, Jaguar Land Rover engine oil specification STJLR.03.5006, MB-Approval 229.71
• OPEL OV0401547 - A20, Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1, Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A / Meets Ford WSS-M2C947-B1 / Meets Ford WSS-M2C962-A1

Carlube Triple R 5W-20 R-Tec 15 is a fully synthetic engine oil developed to provide enhanced engine and catalyst protection, as well as improved fuel efficiency for modern engines requiring a low viscosity engine oil.

Triple R 5W-20 R-Tec 15 delivers excellent performance in both engine protection and cleanliness. It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel efficiency and ethanol fuel compatibility.

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE is suitable for all makes of 4-stroke bikes, both carburettor or fuel injected where JASO MA or MA2 are recommended.
• Castrol POWER1 ULTIMATE with 5-in-1 formula delivers;
• 1. Excellent acceleration
• 2. Excellent protection
• 3. Smooth riding
• 4. Keeps the engine cool on long rides
• 5. Enduring performance

• Performance : API SN JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF 5W-30 Lubricant

Castrol EDGE 5W-30 C3 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0209082

Advantages

Castrol EDGE 5W-30 C3 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• GMdexos2(TM)*
• MB-Approval 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Generating phenomenal amounts of horsepower, supercars are at the pinnacle of automotive engineering and performance. Continual advancement of supercar engines has led to extreme pressures - providing the ultimate test for engine oil. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE SUPERCAR is proven in world-leading supercars and engineered with the most advanced technology for high-performance driving. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most. Suitable for use in everyday high-performance vehicles, Castrol EDGE SUPERCAR is proof that our oils are tested to the limits. Castrol EDGE SUPERCAR with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 10W-60 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA A3/B4, API SN/CF Castrol EDGE 10W-60 is approved for use in vehicles from leading supercar manufacturers: Refer to Product Performance section. Please refer to your owners handbook.

Advantages

Castrol EDGE 10W-60 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from supercars, sports cars, competition and latest technology, high powered engines. Operating under higher pressures, these engines require an oil with outstanding strength and performance.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Delivers low foam performance

Product Performance Claims

• ACEA A3/B3, A3/B4
• API SN/CF
• Approved for BMW M-Models
• VW 501 01/ 505 00

• Delivers low foam performance
• Recommended by world-leading car manufacturers
• Independently tested at the highest standards for proven performance
• Reduces power-robbing friction across engine speeds and conditions
• Transforms to be strongest when the pressure is highest, protecting your engine
• Suitable for use in everyday high-performance vehicles, Castrol EDGE SUPERCAR is proof that our oils are tested to the limits.

• ACEA A3/B3, A3/B4, API SN/CF
• Approved for BMW M-Models, VW 501 01/ 505 00

Carlube 2-Stroke Fully Synthetic motorcycle oil is a high performance, ash-less engine oil, providing advanced durability for a wide range of 2T applications, also suitable for use in direct fuel injector (DFI) and non DFI engines.

Prevents high temperature deposit formation with excellent anti-wear performance. Eliminates piston ring and power valve sticking, providing a cleaner engine and prolonging engine life and improving power. Enhanced cleanliness and wear protection.

Carlube Triple R 0W-20 R-Tec 3 is a fully synthetic engine oil formulated to provide proven engine protection for the latest generation of VW petrol and diesel engines.

Triple R 0W-20 R-Tec 3 provides exceptional wear protection for VW engines requiring the VW 508.00/509.00 specification.
This oil prevents the formation of sludge and therefore the build-up of potentially harmful deposits.
Carlube Triple R 0W-20 R-Tec 3 has specific technology that reduces the likelihood of viscosity increase as a result of oxidation whilst also providing excellent fuel economy.

Castrol EDGE Professional, boosted with TITANIUM FST(TM), provides outstanding oil strength for today's engines that work harder, with higher pressures than ever before. Castrol EDGE Professional is our strongest and most advanced range of engine oils. Its TITANIUM FST(TM) doubles its film strength, preventing oil film breakdown and reducing friction.

Castrol EDGE Professional with TITANIUM FST(TM): helping your engine perform at its best.

Castrol EDGE Professional is now certified CO2 neutral according to the highest global standards. Engineered with micro filtration in order to meet

Castrol Professional's new quality standard and verified using our new Optical Particle Measurement System to guarantee product quality.

Application

Castrol EDGE Professional C1 5W-30 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C1 or C2 specification.

Castrol EDGE Professional C1 5W-30 is recommended and approved for use in vehicles that require a Jaguar Land Rover engine oil specification STJLR.03.5005 lubricant.

Castrol EDGE Professional C1 5W-30 is recommended and approved for use in vehicles that require a lubricant that Meets Ford WSS-M2C934-B specification.

Advantages

Castrol EDGE Professional C1 5W-30 gives you the confidence to demand maximum engine performance from today's latest technology, highly engineered engines that operate with tighter tolerances, requiring a high level of protection and high performance low viscosity oils.

• Maximises short and long term engine performance
• Reduces engine deposits to help maximise engine response
• Delivers complete protection across a variety of engine speeds, conditions and temperatures
• Sustains maximum performance even when under pressure
• Independently proven to improve engine efficiency
• Delivers unsurpassed levels of protection across a variety of driving conditions and temperatures

Product Performance Claims

• ACEA C1
• Jaguar Land Rover engine oil specification STJLR.03.5005

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Carlube 15W-40 Semi-Synthetic is a low SAPS SHPD Grade oil designed to provide the ultimate in engine protection for heavy-duty diesel engines running on low Sulphur fuel and designed to meet Euro V emissions requirements.

Controls soot thickening & wear Low volatility ensures low oil consumption Increased thermal & oxidation stability reduces oil aging allowing extended drain intervals Reduces environmental impact through reduced emissions Exceeds emissions system requirements

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most. Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional V 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends and ACEA C5 0W-20 lubricant. Castrol EDGE Professional V 0W-20 is approved for use in vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook.

Advantages

Castrol EDGE Professional V 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Volvo VCC RBS0-2AE