Engine Oils

• Low viscosity and special additives result in maximum reduction friction which results in a lower fuel consumption.
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition.
• Provides ultimate protection against wear under all operating conditions
• Keeps engine extremely clean by minimizing deposits
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfill the latest standards of leading engine manufacturers.

• BMW LL-12 FE
• Recommended for in-warranty service fill where Ford WSS-M2C950-A is required
• MB-Approval 229.61
• ACEA C2 ACEA A5/B5 API SP-RC, SP, SN Plus ILSAC GF-6A
• Recommended for use by Valvoline where Fiat 9.55535-GS1, DS1 or Iveco 1811 SC1 LV-16 is required

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect. Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver protection designed specifically for modern driving

Product Performance Claims

• ACEA C3
• API SN
• BMW Longlife-04
• Renault RN0700 / RN0710
• Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C3, API SN
• BMW Longlife-04, Renault RN0700 / RN0710, Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC's unique formulation protects from the moment you start, dramatically reducing* engine wear. Now with ultra-refined molecules, for protection you can see, hear and feel. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test

Castrol MAGNATEC 5W-30 DX is suitable for use in automotive gasoline engines where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant. Castrol MAGNATEC 5W-30 DX is approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant. Dexos1 Gen3 is backwards compatible with previous generation dexos1.

• Suitable for use where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant
• Approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant
• Delivers superior performance under extreme cold start-up conditions relative to thicker grades
• Provide continuous protection for all driving conditions, styles and temperatures

Specifications

• API SP
• ILSAC GF-6
• Meets Ford WSS-M2C946-A/ WSS-M2C946-B1/ WSS-M2C961-A1
• GM dexos1(TM) Gen 3

• Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear
• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC: Non-stop protection from every start.

• API SP, ILSAC GF-6
• GM dexos1 Gen 3
• OPEL OV 040 1547 - G30

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: PSA B71 2312 for service fill (MA6) Meets: ACEA C2
• Meets requirements of Citroën*

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear
• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C2, API SN
• Meets Fiat 9.55535-S1

Carlube Triple R 0W-20 R-Tec 3 is a fully synthetic engine oil formulated to provide proven engine protection for the latest generation of VW petrol and diesel engines.

Triple R 0W-20 R-Tec 3 provides exceptional wear protection for VW engines requiring the VW 508.00/509.00 specification.
This oil prevents the formation of sludge and therefore the build-up of potentially harmful deposits.
Carlube Triple R 0W-20 R-Tec 3 has specific technology that reduces the likelihood of viscosity increase as a result of oxidation whilst also providing excellent fuel economy.

• Contains a unique chemical marker to guarantee authenticity
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN Plus, VW 508.00 / 509.00 (TL 52577), PORSCHE C20

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3,API SN PLUS
• BMW Longlife-04, MB-Approval 229.31/ 229.51/ 229.52

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops, oils drain off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*.

Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and vehicles where the manufacturer recommends an ACEA C2 specification lubricant.

Advantages

Castrol MAGNATEC's Intelligent Molecules:

• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

Product Performance Claims

• ACEA C2
• PSA Approval B71 2312

• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC’s formulation protects from the moment you start, dramatically reducing engine wear

• ACEA C2
• PSA Approval B71 2312

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance

• ACEA C3, API SN/CF
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, GM dexos2, MB-Approval 226.5/ 229.31/ 229.51, Renault RN 0700 / RN 0710, VW 505 00/ 505 01

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC's unique formulation protects from the moment you start, dramatically reducing* engine wear. Now with ultra-refined molecules, for protection you can see, hear and feel. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test

Castrol MAGNATEC 5W-30 DX is suitable for use in automotive gasoline engines where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant. Castrol MAGNATEC 5W-30 DX is approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant. Dexos1 Gen3 is backwards compatible with previous generation dexos1.

• Suitable for use where the manufacturer recommends an API SP, ILSAC GF-6 or earlier specification 5W-30 lubricant
• Approved for use in vehicles that require a dexos1 TM Gen3 specification 5W-30 lubricant
• Delivers superior performance under extreme cold start-up conditions relative to thicker grades
• Provide continuous protection for all driving conditions, styles and temperatures

Specifications

• API SP
• ILSAC GF-6
• Meets Ford WSS-M2C946-A/ WSS-M2C946-B1/ WSS-M2C961-A1
• GM dexos1(TM) Gen 3

• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

• Performance: API SP ILSAC GF-6
• GM dexos1™ Gen 3
• OPEL OV 040 1547 - G30

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Carlube Triple R 5W-20 R-Tec 15 is a fully synthetic engine oil developed to provide enhanced engine and catalyst protection, as well as improved fuel efficiency for modern engines requiring a low viscosity engine oil.

Triple R 5W-20 R-Tec 15 delivers excellent performance in both engine protection and cleanliness. It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel efficiency and ethanol fuel compatibility.

Technical Information

Engine oils: Commercial Vehicle Com Veh eng oil -- synthetic

Castrol Vecton Long Drain 10W-40 E6/E9 is a full synthetic low SAPS engine oil formulated with unique System 5 TechnologyTM for up to 40% better performance1. It is also engineered for extended oil drain up to 100,000km2 in the latest European diesel engines including Euro 6 and engines fitted with DPF, in accordance with OEM specifications.

Application
Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Advantages

Modern engines operate in constantly changing conditions which impacts engine performance. Castrol Vecton Long Drain 10W-40 E6/E9's unique System 5 TechnologyTM adapts to these changing conditions to help maximise engine performance. It provides exceptional resistance to contaminants and delivers outstanding performance when you run extended drains, even under severe operating conditions.

System 5 TechnologyTM helps to maximise engine performance throughout extended drain intervals:

• Fights harmful acids which form during engine operation, maintaining TBN reserve throughout the oil drain
• Fights wear to critical engine components
• Fights piston deposits even under severe operating conditions.

Castrol Vecton Long Drain10W-40 E6/E9 is approved by Mercedes Benz, Renault, Volvo and Deutz for oil drain up to 100,000 Km2, in accordance with their specifications.

1. In independent laboratory tests, Castrol Vecton Long Drain 10W-40 E6/E9 performed up to 40% better than API and ACEA industry standard limits across oil thickening, piston deposits, soot handling and wear and corrosion.

2. Actual oil drain depends on engine type, operating conditions, service history, use of on-board diagnostics and fuel quality. Always consult your manufacturer's handbook.

Product Performance Claims

• ACEA E6, E7, E9
• API CJ-4
• JASO DH-2
• CAT ECF-3
• Cummins CES 20081
• Deutz DQC IV-10LA
• Mack EO-O Premium Plus, EOS-4.5
• MB-Approval 228.51
• MTU Oil Category 3.1
• RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5
• Meets requirements of MAN M 3271-

• It is suitable for highly rated diesel engines meeting Euro I to Euro VI emission requirements
• It is strongly recommended for engines fitted with particulate filters and is designed for use in combination with low sulphur diesel fuel
• Castrol VECTON Long Drain with System Pro Technology is specifically engineered and tested for extended drains up to 120,000 km*.

• ACEA E6, E7, E9, API CJ-4
• JASO DH-2, CAT ECF-3, Cummins CES 20081, Deutz DQC IV-10LA, Mack EO-O Premium Plus, EOS-4.5, MB-Approval 228.51, MTU Oil Category 3.1, RVI RLD-3
• Volvo CNG, VDS-4, VDS-4.5, Meets requirements of MAN M 3271-1, M 3477
• For Iveco trucks requiring ACEA E6, E7 and E9, Meets DAF Euro VI requirements

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Drivers and mechanics have trusted Castrol GTX for over 50 years to help extend engine life. Castrol GTX's 3X-Clean formula has been developed to fight the three main causes of engine sludge: heat, contaminants and short trips. By cleaning away existing sludge and creating a barrier that helps stop deposits from forming, Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards. This means drivers and their vehicles enjoy more years together. Castrol GTX: helps extend engine life

Application

Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specification 5W-30 lubricant.

Advantages

• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Provides advanced protection against viscosity and thermal breakdown.
• Demonstrates exceptional protection against high temperature deposits
• Contains premium synthetic technology base oils and anti-wear additives

Performance

• ACEA C3
• MB-Approval 226.52
• Renault RN 17

• Castrol GTX 5W-30 RN17 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3 5W-30 lubricant. Castrol GTX 5W-30 RN17 is approved for use in vehicles that require a Renault RN17 specifcation 5W-30 lubric
• 5w-30
• Petrol & diesel
• ACEA C3 MB-Approval 226.2 Renault RN 17
• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C3
• MB-Approval 226.52
• Renault RN 17