Engine Oils

Carlube 15W-40 Semi-Synthetic is a low SAPS SHPD Grade oil designed to provide the ultimate in engine protection for heavy-duty diesel engines running on low Sulphur fuel and designed to meet Euro V emissions requirements.

Controls soot thickening & wear Low volatility ensures low oil consumption Increased thermal & oxidation stability reduces oil aging allowing extended drain intervals Reduces environmental impact through reduced emissions Exceeds emissions system requirements

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most. Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional V 0W-20 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends and ACEA C5 0W-20 lubricant. Castrol EDGE Professional V 0W-20 is approved for use in vehicles that require a Volvo VCC RBS0-2AE specification 0W-20 lubricant. Please refer to your owners handbook.

Advantages

Castrol EDGE Professional V 0W-20 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Volvo VCC RBS0-2AE

Technical Information

Engine oils: Motorcycle Motorcycle 2T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE 2T is an advanced engine oil for use in modern, high speed, high performance 2-stroke engines. Its fast burn, high protection formula is designed to release the full potential from highly tuned motorcycle engines.
• Fast burning, high protection formula.
• Designed for both oil injection and pre-mix systems up to 50:1
• Excellent engine cleanlines
• Exceptional resistance to seizure.

• Performance - API TC ISO-L-EGD JASO FD

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE Professional is micro-filtered and certified CO2 Neutral according to the highest global standard*. Its patented Fluid TITANIUM transforms to be stronger under pressure and reduces friction for maximum engine performance when you need it most.

Castrol EDGE Professional with Fluid TITANIUM: unlock the true performance of your engine.

* in accordance with the BSI PAS 2060 specification

Application

Castrol EDGE Professional E 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol EDGE Professional E 0W-30 is approved for use in vehicles where a Jaguar Land Rover engine oil specification STJLR.03.5007 0W-30 lubricant is required. Please refer to your owners handbook.

Advantages

Castrol EDGE Professional E 0W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's sophisticated vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C2
• Jaguar Land Rover engine oil specification STJLR.03.5007

• Castrol EDGE Professional E 0W-30 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C2 0W-30 lubricant.
• Delivers more horsepower and greater acceleration to get you more metres ahead
• Demonstrates improved performance as a result of better fuel economy
• Stronger under pressure in today’s modern engines
• Recommended for world-leading car manufacturers
• Suitable for use in hybrid cars

• Product Performance Claims: ACEA C2
• Jaguar Land Rover engine oil specification STJLR.03.5007

• Provides ultimate engine protection for all driving conditions
• Excellent sludge control for stop-go city motoring
• Blended with the latest additive technology
• Excellent high temperature stability

• ACEA A3/B3, A3/B4, E2, API SL/CH-4, CF, VW 505.00, MB 228.1, 229.1

Carlube Triple R 20W-50 R-Tec 38 mineral oil is formulated using the highest quality blend of mineral based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties.
Thus providing longer engine life

• Provides ultimate engine protection for all driving conditions
• Suitable for a wide range of vehicles
• Blended with high quality synthetic and mineral base materials
• Fuel efficient multi-grade engine oil

• ACEA A3/B3, A3/B4, API SL/CF, VW 502.00/505.00, MB 229.1

Carlube Triple R 5W-30 R-Tec 18 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Carlube Triple R 5W-30 R-Tec 18 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles.
They provide exceptional fuel economy particularly vehicles requiring the GM Dexos 1 specification. They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Carlube Triple R 15W-40 R-Tec 36 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 15W-40 R-Tec 36 is Suitable for gasoline engines providing excellent protection and preventing engine wear during startup. Recommended for light-duty service and moderate oil drains.
Triple R 15W-40 R-Tec 36 also provides good sludge control & excellent high-temperature deposit control and is a low-cost oil for basic API SL performance

Carlube Triple R 20W-50 R-Tec 37 mineral oil is formulated using the highest quality blend of mineral-based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties, thus providing longer engine life and maintaining maximum performance.
Carlube Triple R 20W-50 is R-Tec 37 is tried, tested and proven to provide strong wear protection, face the stresses of everyday driving with ease, tackling cold winter months in Northern Europe and beyond.
It protects engine components, maintaining a clean and high performing motor and strong corrosion protection.

• 6. Fill with an appropriate engine lubricant
• 5. Drain the flushing oil
• 4. Idle the engine for 5 – 10 minutes
• 3. Fill with Engine Flushing Oil
• 2. Drain the old oil
• 1. Run the engine until normal operating temperature is achieved

• SAE 30

Carlube Triple R SAE 30 R-Tec 40 is a high-performance engine oil suitable for all naturally aspirated diesel engines and petrol engines where API SE is specified.

Blended from high-quality base stocks It contains low detergent additives, rust and corrosion inhibitors.
It provides good oxidation stability and can be used as a running-in oil.

Carlube Triple R 10W-40 R-Tec 31 is a trusted and reliable engine oil, It delivers excellent wear protection and cleanliness whilst preventing the damaging processes of corrosion and oxidation.

This oil is suitable for use in a wide range of passenger car engines.
Triple R 10W-40 R-Tec 31 also delivers enhanced piston cleanliness, minimising ring-sticking which can result in premature engine wear and blow-by. Within engines, deposits can negatively impact fuel economy, performance and ultimately the life of your engine. Furthermore,
Carlube Triple R 10W-40 R-Tec 31 reduces engine sludge by up to 14%, ensuring key components are kept cool, lubricated and working at their maximum potential.

Carlube Triple R 10W-30 R-Tec 30 is a high-performance diesel engine oil, proven to provide excellent wear protection through various demanding tests.

Test results show that Carlube Triple R 10W-30 R-Tec 30 provided 37% less cam wear than the ACEA A3/B4 test limit requirement.
Carlube Triple R 10W-30 R-Tec 30 improves engine cleanliness, providing up to 14% better performance than the ACEA A3/B4 test limit in the average engine sludge test and also achieving over 60% better piston cleanliness than the ACEA A3/B4 test limit requires. Outstanding engine cleanliness and protection

• Excellent anti-wear properties
• Optimised level of detergency
• Cost effective

• API CC/SE, CCMC D1, MIL-L-2104B, MIL-L-46152B

• Exceptional long term additive response
• Provides high performance with fuel efficiency
• Provides protection for diesel particulate filters and catalytic converters
• Designed for BMW LL-04 and Mercedes-Benz MB 229.31 specifications

• ACEA C3, API SM/CF, BMW LONGLIFE-04, MB 229.31

Carlube Triple R 15W-40 R-Tec 35 has been thoroughly tested against American and European industry-wide specifications and criteria to provide reassuring and reliable engine protection and performance within the recommended oil drain intervals.

Triple R 15W-40 R-Tec 35 is ideal for fleet owners where mixed vehicle types and brands are in use, due to the convenience of approvals including ACEA A3/B4 and API SN. All of these feature heavily in Original Equipment Manufacturer (OEM) requirements as per vehicle handbook recommendations. Good anti-wear protection

• Provides outstanding wear protection
• Backwards compatible to Ford M2C913-A and 913-B specifications
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700

• Backwards compatible to Ford M2C913-A and 913-B specifications
• Provides outstanding wear protection
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF, FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700

• Provides high performance with fuel efficiency
• Provides protection for diesel particulate filters and catalytic converters
• Suitable for VW PD engines, GM dexos2, modern and certain Fiat & Ford KA models
• A highly advanced low SAPS engine oil

• ACEA C3, API SN/CF, MB 229.51, BMW LONGLIFE-04, VW 502.00/505.01, GM dexos2™, FORD WSS-M2C917-A, RENAULT RN0700/RN0710, PORSCHE A40, FIAT 9.55535-S2

Carlube Triple R 5W-30 R-Tec 21 is a super-clean, ultra-high performing low SAPS passenger car engine oil, designed to maintain engine efficiency by protecting against deposit formation, thereby ensuring piston cleanliness.

Triple R 5W-30 R-Tec 21 has been developed with low SAPS to protect expensive after-treatment devices. Incorrect lubricants can quickly block DPFs and poison SCRs devices, increasing exhaust back pressures and increase exhaust emissions.
Triple R 5W-30 R-Tec 21 is fully compatible with exhaust after-treatment devices, supporting lower emissions and preventing expensive replacement costs or service bills. Exceptional performance when engines are coldest when at most risk

• Provides ultimate engine protection for all driving conditions
• Excellent sludge control for stop-go city motoring
• Blended with the latest additive technology
• Excellent high temperature stability

• API SL/CF, ACEA A3/B4, A3/B3
• MB-229.1, VW 505.00

• Formulated for excellent product stability. Long lasting performance and suitable for long drain intervals
• In the Volkswagen DID test for direct injected diesel engines, SynPower SAE 10W-40 delivers optimum performance with regards to piston cleanliness and ring sticking
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Renault RN0700/RN0710, VW Standard 502.00/505.00 Meets: ACEA A3/B3, A3/B4, API: SM, SN/CF
• MB 229.3, PSA B71 2300. Recommended for use where Fiat 9.55535.G2 or D2 is specified.

• Not to be used in vehicles with diesel particulate filters
• Allows for extended drain capability
• Suitable for a wide range of vehicles
• Primarily designed for GM Vauxhall (non DPF)

• ACEA A3/B4, API SM/CF, VW 502.00/505.00, MB 229.5, GM LL-A-025, LL-B-025, BMW LONGLIFE-01, LONGLIFE-98

• Promotes reduced fuel consumption
• Excellent high and low temperature stability
• Extended drain intervals
• After treatment system compatible

• ACEA C2, C3, API SN/CF

Carlube Triple R 5W-30 R-Tec 17 is a fully synthetic engine oil formulated to provide proven engine protection for the latest generation of Ford petrol and diesel engines.

Triple R 5W-30 R-Tec 17 has been specially formulated to meet and exceed the ACEA A5/B5 and Ford M2C913-D specifications An oil meeting these specifications provides countless benefits to vehicle owners such as improved fuel economy, and robust performance in the use of biofuels.
Triple R 5W-30 R-Tec 17 is also compatible with older Ford engines where the Ford M2C913-A, M2C913-B, and M2C913-C are required.