Engine Oils

Carlube Triple R 5W-30 R-Tec 19 is an ultra high performing engine oil that has been developed to meet the exacting requirements of Volkswagen VW 504.00/507.00 performance level.

This oil is suitable for use in older vehicles as well as the most modern engines. As a lubricant that meets the highest performance engine oil specification, it provides superior engine cleanliness, wear protection, fuel economy and after treatment device compatibility, prevents the formation of harmful engine sludge and deposits. Keeps key components cool, clean, lubricated and working at their best, providing an impressive 1.7% improvement in fuel economy.

Carlube Triple R 5W-30 R-Tec 24 is a fully synthetic, lower SAPS (Low in Sulfated Ash, Phosphorus, and Sulfur) engine oil designed to deliver advanced protection for the latest generation of petrol or diesel engines.

It is designed to reduce particulate build-up in the exhaust after-treatment systems.
Triple R 5W-30 R-Tec 24 has been specially developed to meet and exceed the ACEA C1 specification. Engine oils meeting the C1 specification will increase the life of after-treatment devices and improve the vehicle’s fuel economy.

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• BMW LONGLIFE-12 FE

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Ford diesel engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2
• FORD WSS-M2C950-A, JAGUAR LAND ROVER STJLR.03.5007

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

•  ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145
• ILSAC GF-6A
• BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

• Outstanding turbocharger protection
• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

• ACEA C5, C6, API SN PLUS, SP, FORD WSS-M2C952-A1, MB 229.71, OPEL/VAUXHALL OV 0401547, GM DEXOS D, JLR STJLR.03.5006

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Designed specifically for the latest Volvo engines
• Fuel economy formulation with no compromise in protection

• ACEA C5, API SN, VOLVO VCC RBS0-2AE

• Covers Longlife III applications
• Provides protection for diesel particulate filters and catalytic converters
• Suitable for VW, Audi, GM, BMW, Mercedes, Seat, Skoda, and certain Peugeot & Citroen models
• A highly versatile low SAPS engine oil for ACEA C3 applications

• ACEA C3, API SN
• VW 504.00/507.00, BMW LONGLIFE-04, MB 229.51, PORSCHE C30

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Fuel economy formulation with no compromise in protection
• Designed for the latest petrol vehicles requiring low viscosity engine oils

• API SN, SN-RC, ILSAC GF-5

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Formulated for excellent product stability. Long lasting performance and suitable for long drain intervals
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-04, GM Dexos 2, MB-229.51, MB-229.52, VW 50200/50500/50501 Meets: ACEA C3, API: SN/CF

• Provides high performance with exceptional fuel economy
• Exceptional long term engine protection
• Provides protection for diesel particulate filters and catalytic converters
• An ideal choice for use in many Peugeot and Citroen vehicles

• ACEA C2, API SN/CF
• FIAT 9.55535-S1, PSA B71 2290 (Pre 2017), Renault RN0700

• Extended oil drain capabilities
• Low oil consumption
• Compatible with after-treatment devices
• Exceptional fuel saving benefits

• ACEA E4, E6, E7, E9, API CK-4, MERCEDES BENZ MB 228.52, MB 228.51, MB 228.31, CUMMINS CES 20086, MAN M3777, M3677, CATERPILLAR ECF-3, VOLVO VDS-4.5, RENAULT TRUCKS RLD-4, RLD-3, IVECO 18-1804 TLS E6, SCANIA LDF-4 LA

• Prevention of sludge and varnish formation
• Excellent anti-wear characteristics
• Compatible with after-treatment systems
• Outstanding thermal properties

• ACEA C3, VW 504:00/507:00, BMW LL-04, PORSCHE C30

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-04, MB 229.51, Porsche A40, VW Standard 502.00/505.00/505.01, GM dexos2 GB2E0310103, Renault RN0700/0710 Meets: ACEA C3, API: SM, SN/CF
• Ford WSS-M2C917-A. Recommended for use where Fiat 9.55535.S2 is specified.

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Designed for engines running on bio fuel mixtures (for example E85)
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Jaguar Land Rover STJLR 03.5003 Meets: ACEA A1/B1, A5/B5, API: SL/CF
• Renault RN0700, Ford WSS-M2C913-D. Suitable for use where Ford WSS-M2C913-A, B, C are specified. Recommended for use where Fiat 9.55535.G1 is specified. For diesel engines

Carlube Triple R SAE 50 R-Tec 43 mineral oil is formulated using the highest quality blend of mineral-based oils.

Mineral oils are mixed with advanced technology additives to give high anti-wear and detergency properties, thus providing longer engine life and maintaining maximum performance.
Carlube Triple R SAE 50 R-Tec 43 is tried, tested, and proven to provide strong wear protection, face the stresses of everyday driving with ease, tackling cold winter months in Northern Europe and beyond.
It protects engine components, maintaining a clean and high performing motor and strong corrosion protection.

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Designed for engines running on bio fuel mixtures (for example E85)
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Meets: ACEA C5, API: SN
• Jaguar Land Rover STJLR.03.5004, Ford WSS-M2C948-B (petrol engines), Backwards compatible with Ford WSS-M2C913-B, C and WSS-M2C925-B.Please refer to the product information sheet for specific Ford recommendation.

Carlube SAE30 Classic Motor Oil is a specialist lubricant designed for use in veteran, vintage and classic motor vehicles. The high-quality, low detergent monograde mineral lubricants are suitable for use in naturally aspirated 4 stroke petrol and diesel engines and manual operated gearboxes of that age, providing maximum protection to prolong the life performance of treasured classics.

Provides optimum lubrication protection. Non-detergent motor oil. Meets period performance requirements. Ideal for cold autumn & winter conditions and lower viscosity ensures rapid circulation.

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-04, MB 229.51, Porsche C30, VW Standard 504.00/507.00*. Meets: ACEA C3
• MB 229.31

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN, JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Carlube Triple R 0W-40 R-Tec 12 has a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation, Test results show that this oil has excellent low-temperature pump-ability with proven performance down to -40°C.

Even at these extreme temperatures, the oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-40 R-Tec 12 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.
This product offers excellent viscosity increase control in both gasoline and diesel engines and prevents varnishes from building up on pistons, keeping grooves cleaner and piston rings free.

• Keeps engine extremely clean by minimizing deposits
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Jaguar Land Rover STJLR 03.5005 Meets: ACEA C1 and C2
• Recommended for in-warranty service fill where Ford WSSM2C934-B is required, Meets requirements of Land Rover, Jaguar, Mitsubishi *Check owner’s manual before use

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

• Castrol MAGNATEC 5W-40 DPF’s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.
• Synthetic Diesel technology to provide increased protection in high and low temperature applications
• Provides continuous protection for all driving conditions, styles and temperatures
• Delivers superior performance under extreme cold start up conditions

• ACEA C3, API CF/SN
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, MB-Approval 229.31/ 229.51, OPEL OV 040 1547 - D40, VW 505.00/ 505.01

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103
• Meets: API: SN Plus RC (Resource Conserving)
• ILSAC GF-6

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Covers the ACEA C2 low SAPS oil specification

• ACEA C2, API SM/CF