Engine Oils

• Compatible with petrol particulate filters
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency
• Low speed pre-ignition prevention

• ACEA C5, API SP, SN PLUS, SN-RC, ILSAC GF-6A, BMW LONGLIFE-17 FE+, LONGLIFE-14 FE+, MERCEDES BENZ MB 229.72, MB 229.71, OPEL / VAUXHALL OV0401547, JAGUAR LAND ROVER STJLR.03.5006, FORD WSS-M2C947-B1, FIAT 9.55535-GSX, CHRYSLER MS-12145

Fully synthetic engine oil manufactured to give maximum performance with unrivalled protection from cold start to high temperature driving.

Carlube Triple R 5w30 Fully Synthetic is a longlife motor oil suitable for the latest generation of petrol and diesel engines, on fixed and variable service intervals, and requiring a low SAPS/Low ash engine oil.

Optimum engine performance and improved fuel economy. Reduced exhaust emissions and reduced friction and wear. Exceptional all year round protection from cold start to high temperature driving.

Carlube Triple R 5W-30 R-Tec 25 is a fully synthetic, low SAPS engine oil designed to deliver superior protection and performance for the latest generation of petrol and diesel engines.

Triple R 5W-30 R-Tec 25 has been specially formulated to meet and exceed both the ACEA C3 and C4 specifications as well as Renault RN0720.
The Renault RN0720 performance parameters add to the ACEA baseline with additional performance requirements in areas such as detergency, oxidation, and durability; it is designed to reduce particulate build-up and poisoning within the after-treatment systems.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

• Delivers superior performance under extreme cold start up conditions
• Provides continuous protection for all driving conditions, styles and temperatures
• Synthetic Diesel technology to provide increased protection in high and low temperature applications
• Castrol MAGNATEC 5W-40 DPF’s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

• ACEA C3, API CF/SN
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, MB-Approval 229.31/ 229.51, OPEL OV 040 1547 - D40, VW 505.00/ 505.01

Carlube Triple R 5W-20 R-Tec 14 meets the Ford M2C948-B specification, which is primarily designed for the 1.0 liter, three-cylinder EcoBoost engine, and also offers backward compatibility.

Engine oils that meet this specification must provide a 0.9% fuel economy improvement over regular 5W-20 oils during testing.
Triple R 5W-20 R-Tec 14 reduces internal friction within the engine in order to deliver full power, while at the same time generating fuel savings.
As a lighter viscosity engine oil, Carlube Triple R 5W-20 R-Tec 14 provides faster flow to engine parts even at low temperatures due to its extreme fluidity. This will result in reduced metal-to-metal contact and continuous oil flow around the engine.

• Keeps engine extremely clean by minimizing deposits
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Jaguar Land Rover STJLR 03.5005 Meets: ACEA C1 and C2
• Recommended for in-warranty service fill where Ford WSSM2C934-B is required, Meets requirements of Land Rover, Jaguar, Mitsubishi *Check owner’s manual before use

Carlube Triple R 0W-20 R-Tec 4 has been formulated to meet API SN and ILSAC GF-5 specifications. An oil meeting these demanding specifications must demonstrate a range of performance parameters.

Triple R 0W-20 R-Tec 4 delivers excellent performance in both engine protection and cleanliness.
It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel-efficiency and ethanol fuel compatibility.

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialized additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN, JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Carlube 4-Stroke Fully Synthetic Motorcycle oil is formulated to cope with high revving and higher operating temperatures experienced with motorcycle engines. These oils are suitable for small engine scooters to large V twin engines, sports and racing motorcycles.

Eliminates piston ring and prevents power valve sticking providing a cleaner engine allowing for long lasting power and best performance. Proven engine durability and cleanliness allowing for long lasting power. Prevention of soot formation, sludge and deposits in turn protecting engine from damage. Constant lubrication protecting all engine components against wear.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet, providing an extra layer of protection. Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 5W-30 lubricant.

Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290 5W-30 lubricant.

Advantages

Castrol MAGNATEC's Intelligent Molecules:

• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

Product Performance Claims

• ACEA C2
• PSA Approval B71 2290

• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C2
• PSA Approval B71 2290

• Keeps engine extremely clean by minimizing deposits. Exceeds the ACEA A3/B3 limits for piston cleanliness in the Volkswagen TDI engine test
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Formulated for excellent product stability. Long-lasting performance and suitable for long drain intervals
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: PSA B71 2290-2017 Meets: ACEA C2, A1/B1, A5/B5, API: SM, SN/CF
• Renault RN0700. Meets requirements of: Honda*, Toyota*. Recommended for use where Fiat 9.55535.S1 is specified. *Check owners’manual before use

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialised additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions. Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M. Recommended for use where Fiat 9.55535.H3 is specified

Carlube Triple R 15W-40 R-Tec 36 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 15W-40 R-Tec 36 is Suitable for gasoline engines providing excellent protection and preventing engine wear during startup. Recommended for light-duty service and moderate oil drains.
Triple R 15W-40 R-Tec 36 also provides good sludge control & excellent high-temperature deposit control and is a low-cost oil for basic API SL performance

Carlube Triple R 0W-30 R-Tec 8 has been developed to offers after treatment device compatibility, superior cold-temperature performance whilst prolonging engine life, it meets the PSA Peugeot Citroen B71 2312 specification, which has been specially developed to sustain the most severe operating conditions.

This specification also requires improved cold flow properties to reduce the hydrodynamic friction of the oil, in order to obtain fuel economy benefits especially when the oil is cold.
Triple R 0W-30 R-Tec 8 provides excellent oil flow at start-up, even when cold, allowing critical engine components to be lubricated quicker. A top tier lower SAPS engine oil, meeting the latest European emission standards.

• Provides high performance with excellent fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Particularly suitable for latest Mazda and Land Rover vehicles.

• ACEA C1
• FORD WSS-M2C934-B, Jaguar Land Rover STJLR.03.5005

• Outstanding cold-start fluidity
• Exceptional long-term additive response
• Designed specifically for the latest Volvo engines
• Fuel economy formulation with no compromise in protection

• ACEA C5, API SN
• VOLVO VCC RBS0-2AE

• Unsurpassed levels of engine protection
• Peak performance throughout even the longest service intervals
• Fuel economy savings
• Improved performance
• Exceptional low temperature properties

• ACEA A5/B5, API SL/CF
• VOLVO VCC 95200377, BMW LONGLIFE-01 FE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA A1/B1, A5/B5, API SN
• ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Designed specifically for the latest Ford diesel engines
• Provides protection for diesel particulate filters and catalytic converters

• ACEA C2
• FORD WSS-M2C950-A, JAGUAR LAND ROVER STJLR.03.5007

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C2, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade.
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• ACEA C2
• BMW LONGLIFE-12 FE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC: Non-stop protection from every start.

Application

Castrol Magnatec 5W-20 E is a fully synthetic lubricant suitable for use vehicles that require a 5W-20 lubricant that Meets Ford WSS-M2C948-B specification.

Product Performance Claims

• Approved - Ford WSS-M2C948-B

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• Approved - Ford WSS-M2C948-B

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 10W-40 A/B is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP 10W-40 lubricant. Castrol MAGNATEC 10W-40 A/B is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Product Performance Claims

• ACEA A3/B4
• API SP
• Meets - Fiat 9.55535-D2
• MB-Approval 229.3
• VW 501 01/ 505 00

• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect..
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Deliver protection designed specifically for modern driving
• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 0W-30 D is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 0W-30 lubricant.

Castrol MAGNATEC 0W-30 D is suitable for use in vehicles that require a 0W-30 lubricant that Meets Ford WSSM2C950-A specification.

Product Performance Claims

• ACEA C2
• Meets Ford WSS-M2C950-A

• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA C2
• Meets Ford WSS-M2C950-A

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialized additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M, Koenigsegg

• Combines high performance with fuel efficiency
• Exceptional long term additive response
• Provides protection for diesel particulate filters and catalytic converters
• Covers the ACEA C2 low SAPS oil specification

• ACEA C2, API SM/CF

Carlube 2-Stroke Endurance Oil has been developed to satisfy and meet the requirements of water-cooled outboard marine 2-stroke engines for both leaded and unleaded petrol engines. The high resistance to water wash-off and corrosion protection makes it an ideal choice for boats, trailer wheel bearings, swivel hinges, pins, propeller shafts, cables and pulleys, winches and other routine marine maintenance.

High resistance to water wash-off. Corrosion protection. Excellent protection against piston scuffing and seizure. Ashless detergent, dispersant additives reduce engine deposits and ring sticking. Strong anti-gel performance. Excellent rust protection.