Engine Oils

Carlube Triple R 0W-30 R-Tec 7 is a fully synthetic low SAPS engine oil suitable for vehicles with either diesel or petrol engines that are fitted with after-treatment devices to meet European emissions requirements

This oil will protect after-treatment devices such as Three-Way Catalysts (TWCs) or Diesel Particulate Filters (DPFs) for the lifetime of the vehicle.
Prevents the formation of sludge and deposits in the engine which can cause oil starvation and increased engine wear Low-SAPS technology therefore DPF, SCR & EGR compatible

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Castrol GTX is one of the world's most trusted engine oils. It's more than just oil. It's liquid engineering that protects against the problems your engine faces every day.

Severe driving conditions can cause the build up of a thick, tar-like substance called sludge. Sludge can block your engine's vital oilways like cholesterol - and if untreated it can rob an engine of power and, ultimately, its life. Castrol GTX Double Action formula cleans away old sludge*, and protects against new sludge formation better than tough industry standards

Help extend the life of your engine with Castrol GTX.

Castrol GTX 5W-30 C4 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C4 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a Renault RN 0720 approved 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a MB-Approval 226.51 approved 5W-30 lubricant

• Provides superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Specification

• ACEA C4
• MB-Approval 226.51
• Renault RN 0720

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C4
• MB-Approval 226.51, Renault RN 0720

Carlube Triple R 5W-30 R-Tec 19 is an ultra high performing engine oil that has been developed to meet the exacting requirements of Volkswagen VW 504.00/507.00 performance level.

This oil is suitable for use in older vehicles as well as the most modern engines. As a lubricant that meets the highest performance engine oil specification, it provides superior engine cleanliness, wear protection, fuel economy and after treatment device compatibility, prevents the formation of harmful engine sludge and deposits. Keeps key components cool, clean, lubricated and working at their best, providing an impressive 1.7% improvement in fuel economy.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

• Deliver unique patented protection designed specifically for modern driving
• Dramatically reduce both warm-up2 and stop-start3 wear by 50%
• Form a powerful force field of protection
• Castrol MAGNATEC: Non-stop protection from every start.

• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52
• BMW Longlife-04, Meets Fiat 9.55535-S2
• ACEA C3, API SN Plus

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Carlube Triple R 0W-40 R-Tec 12 has a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation, Test results show that this oil has excellent low-temperature pump-ability with proven performance down to -40°C.

Even at these extreme temperatures, the oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-40 R-Tec 12 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.
This product offers excellent viscosity increase control in both gasoline and diesel engines and prevents varnishes from building up on pistons, keeping grooves cleaner and piston rings free.

Carlube Triple R 0W-20 R-Tec 5 is a fully synthetic engine oil formulated to provide proven engine protection in those vehicles requiring the latest ACEA C5 specification, particularly new Jaguar Land Rover petrol and diesel engines.

Triple R 0W-20 R-Tec 5 provides excellent viscosity increase control in both old and new engines. This oil offers strong performance in regard to engine cleanliness, and also provides excellent oxidation control even in the presence of biodiesel.
Triple R 0W-20 R-Tec 5 exceeds all fuel economy requirements whilst also offering proven cam wear protection.

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T is an advanced, premium quality, part-synthetic engine oil developed for the latest generation 4-stroke motorcycle engines. It is designed specifically for bikers who love the exhilaration of riding. Up to 30% of power is lost due to friction without you knowing it. Castrol POWER1 4T with Power Release TechnologyTM boosts the performance of your bike by optimising friction and enables you to accelerate faster.

Application

Castrol POWER1 4T is designed to optimise performance for motorcycle engines. It is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Tested and proven to deliver superior acceleration at the twist of the throttle
• Power Release TechnologyTM optimises friction in the clutch and reduces internal engine losses due to friction
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SL
• JASO MA2

• Its Power Release Formula is specially designed to enable your bike to deliver maximum and sustained power right up to very high operating rpm thus offering a significant advantage over other motorcycle engine oils.
• Castrol Power1 4T reduces internal losses in the engine, whilst retaining optimum wet clutch performance to ensure efficient transfer of power to the rear wheel.
• Tested and proven to deliver improved acceleration at the touch of the throttle
• Castrol Power1 4T - engineered for performance

• API SN
• JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine. Application Castrol EDGE 5W-30 LL is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3 Castrol EDGE 5W-30 LL is approved by leading manufacturers. Please refer to your owners handbook.

Castrol EDGE 5W-30 LL with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Specification

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30
• VW 504 00/ 507 00

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3
• BMW Longlife-04
• MB-Approval 229.31/ 229.51
• Porsche C30,VW 504 00/ 507 00

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2, 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2
• PSA Approval B71 2302, PSA Approval B71 2312
• Meets Fiat 9.55535-DS1/ GS1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Advances in engine technology have led to increased power and efficiency, meaning engines work harder and under higher pressures than ever before. This means the oil has to be stronger to reduce friction and protect the engine.

Castrol EDGE 5W-30 M is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C3, API SN PLUS 5W-30 lubricant. Castrol EDGE 5W-30 M is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Castrol EDGE 5W-30 M is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Independently tested at the highest standards
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Proven performance across a variety of driving conditions and temperatures

Specifications

• ACEA C3
• API SN PLUS
• BMW Longlife-04
• MB-Approval 229.31/ 229.51/ 229.52

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C3, API SN PLUS
• BMW Longlife-04, MB-Approval 229.31/ 229.51/ 229.52

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-40 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA A3/B4, API SP or earlier specifcation 0W-40 lubricant. Please refer to the product performance section and your owners handbook

Advantages

Castrol EDGE 0W-40 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA A3/B4
• API SP
• BMW Longlife-01
• MB-Approval 229.3/ 229.5
• VW 502 00 / 505 00
• Renault RN 0700 / RN 0710
• Meets - Ford WSS-M2C937-A

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A3/B4, API SP
• BMW Longlife-01, MB-Approval 229.5, Porsche A40, Renault RN0700 / RN0710, VW 502 00/ 505 00
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.3

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

• Castrol EDGE 0W-30 delivers against HYSPEC, Castrol’s new hybrid performance standard**
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA C3, API SP
• BMW Longlife-04, BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30, Opel OV 040 1547 - G30, Renault RN 0700 / RN 0710

Carlube Triple R 0W-20 R-Tec 6 is a trustworthy, reliable and robust engine oil that provides strong corrosion and wear protection to key components in an engine, maintaining a clean and high-performing engine for trouble-free driving.

Triple R 0W-20 R-Tec 6 is suitable for the latest direct engine gasoline engines in preventing low-speed pre-ignition and has proven real-world performance in conventional and hybrid vehicles. They provide exceptional fuel economy particularly in 0W-16 as well as 0W-20 vehicles.
They are recommended by hybrid vehicle manufacturers because of their strong corrosion control, sludge control and excellent water tolerance.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 0W-20 LL IV is suitable for use in gasoline and diesel engines where the manufacturer recommends an ACEA C5 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in gasoline and diesel engines in vehicles from the VW Group that require a VW 508 00 / 509 00 specification 0W-20 lubricant. Castrol EDGE 0W-20 LL IV is approved for use in vehicles that require a Porsche C20 specification 0W-20 lubricant.

Advantages

Castrol EDGE 0W-20 LL IV with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 0W-20 LL IV:

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low temperature performance

Product Performance Claims

• ACEA C5
• Porsche C20
• VW 508 00/ 509 00
• Meets - Ford WSS-M2C956-A1

• Castrol EDGE 0W-20 LL IV is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C5, C6 0W-20 lubricant.
• Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers, whilst engine technology adapts to meet the demanding legislative limits.
• With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Demonstrates improved performance as a result of better fuel economy
• Delivers more horsepower and greater acceleration
• Stronger under pressure in today’s modern engines

• ACEA C5, C6
• BMW Longlife-17FE+
• MB-Approval 229.71/ 229.72
• Porsche C20
• VW 508 00/ 509 00
• Meets Ford WSS-M2C956-A1

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance

• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, GM dexos2, MB-Approval 226.5/ 229.31/ 229.51, Renault RN 0700 / RN 0710, VW 505 00/ 505 01
• ACEA C3, API SN/CF

Carlube Triple R 0W-30 R-Tec 9 has advanced additive technology that provides powerful detergency and the ability to prevent the build-up of piston deposits, allowing the lubricant to meet the stringent demands and exacting requirements of the VW 504.00/507.00 specification.

This engine oil is designed to lubricate high power modern based engines.
The formulation maintains a good lubricant flow throughout the engine enhancing the lubrication of all engine parts whilst also preventing wear. Provides excellent engine durability as well as giving fuel economy benefits

Carlube Triple R 10W-60 R-Tec 33 is a technically advanced fully synthetic engine oil designed for the latest generation of high-performance engines, to provide advanced levels of wear protection and performance compared to conventional oils.

It provides excellent engine performance under all driving conditions, excellent cold-weather starting and rapid circulation, and lower oil consumption due to synthetic base.
Lower oil consumption due to synthetic base stocks Excellent cold-weather starting and rapid circulation

Technical Information

High-performance motor oil based on selected mineral oils. Guaranteesreliable lubrication andwear protectionunder normaloperating conditions.

Carlube Triple R 0W-20 R-Tec 3 is a fully synthetic engine oil formulated to provide proven engine protection for the latest generation of VW petrol and diesel engines.

Triple R 0W-20 R-Tec 3 provides exceptional wear protection for VW engines requiring the VW 508.00/509.00 specification.
This oil prevents the formation of sludge and therefore the build-up of potentially harmful deposits.
Carlube Triple R 0W-20 R-Tec 3 has specific technology that reduces the likelihood of viscosity increase as a result of oxidation whilst also providing excellent fuel economy.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Castrol EDGE 0W-20 C5 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C5, ACEA C6, API SP, ILSAC GF-6 or earlier specification 0W-20 lubricant.

Castrol EDGE 0W-20 C5 is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

GM dexos1(TM) Approved-GEN 3 : D355BKDD082

Castrol EDGE 0W-20 C5 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C5, C6
• API SP
• ILSAC GF-6
• GM dexos1(TM) Gen 3
• Jaguar Land Rover engine oil specification STJLR.03.5006
• MB-Approval 229.71
• Opel OV0401547
• Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1
• Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A
• Meets Ford WSS-M2C947-B1

• Stronger under pressure in today’s modern engines
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE 0W-20 C5 delivers against HYSPEC, Castrol’s new hybrid performance standard**.
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.*

• ACEA C5, C6, API SP, ILSAC GF-6
• GM dexos1 Gen 3, Jaguar Land Rover engine oil specification STJLR.03.5006, MB-Approval 229.71
• OPEL OV0401547 - A20, Meets Chrysler MS 6395
• Meets Fiat 9.55535-CR1, Meets Fiat 9.55535-GSX
• Meets Ford WSS-M2C947-A / Meets Ford WSS-M2C947-B1 / Meets Ford WSS-M2C962-A1

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T with Power Sustain Technology(TM) is designed specifically for bikers who love the exhilaration of riding New Castrol POWER1 4T with Power Sustain Technology(TM) manages heat and friction, ensuring continuous power delivery and provides on-demand acceleration.

Application

Castrol POWER1 4T 15W-50 is designed to manage heat & friction to provide sustained power delivery and on-demand acceleration. It is suitable for all 4-stroke motorcycle engines, both carburetor and fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Manages heat and friction in the engine, to ensure continuous power delivery and gives on-demand acceleration. It is specially formulated to suit long riding conditions.
• New POWER1 4T 15W-50 resists oil thickening caused by high temperatures
• New POWER1 4T 15W-50 maintains your bikes performance during long rides.
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SN
• JASO MA2

Technical Information

Engine oils: Motorcycle Motorcycle 2T eng oil -- Synthetic Technology

• Castrol POWER1 Scooter 2T with:
• Power Sustain Formula keeps engine clean
• Excellent high temperature detergency
• Compatible with modern catalytic converters
• Low-ash formulation helps to reduce spark plug fouling

• Performance ISO-L-EGD JASO FD

Carlube Triple R 5W-20 R-Tec 15 is a fully synthetic engine oil developed to provide enhanced engine and catalyst protection, as well as improved fuel efficiency for modern engines requiring a low viscosity engine oil.

Triple R 5W-20 R-Tec 15 delivers excellent performance in both engine protection and cleanliness. It provides high-temperature deposit protection for pistons and turbochargers whilst improving sludge control.
Additional benefits include enhanced fuel efficiency and ethanol fuel compatibility.

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Synthetic

• Castrol POWER1 ULTIMATE is suitable for all makes of 4-stroke bikes, both carburettor or fuel injected where JASO MA or MA2 are recommended.
• Castrol POWER1 ULTIMATE with 5-in-1 formula delivers;
• 1. Excellent acceleration
• 2. Excellent protection
• 3. Smooth riding
• 4. Keeps the engine cool on long rides
• 5. Enduring performance

• Performance : API SN JASO MA2