Workshop Tools
Categories
Important compatibility info
Title | Engine Locking Kit - VAG 1.2TSI/TFSI - Petrol |
Additional Information
- Engine locking kit - VAG 1.2 TSi/TFSi petrol engines (2009-2016)
- The kit also includes 2 x guide pins required for the removal and fitting of the supercharger
- Made in Sheffield
- Equivalent to OEM tool codes T10340, T10414 and T10341
- Engine codes CBZA, CBZB, CBZC
Important compatibility info
Title | Safety Locking Wire - 0.8mm x 30m |
Additional Information
- Stainless steel locking wire 0.8mm
- Length 30m
- Supplied on a plastic dispenser
- Ideal for motor racing applications
- Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces
- Safety wiring also serves as a visual indicator that the fasteners have been properly tightened
Important compatibility info
Title | Flexible Crows Foot Wrench - 22mm - 1/2in. Drive |
Additional Information
- Suitable for 22mm hydraulic, fuel, oil lines, A/C components, O2 sensor etc.
- Offers better access than traditional fixed crows foot wrench
- Traditional flare nut wrench and crowfoot functionality
- 1/2in. Drive x 6 pt Single Hex
- Manufactured from satin finish Chrome Vanadium
Important compatibility info
Title | Cambelt Timing Tool Kit - Ford 1.0GTDI |
Additional Information
- Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required
- Camshaft Locking blocks are EU Registered design
- Made in Sheffield
- Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
- Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
- GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect
Important compatibility info
Title | Crankshaft Positioning Tool - BMW |
Additional Information
- Crankshaft positioning tool for use on BMW N47 engines
- Applications: BMW N47 engines post April 2013
- Equivalent to OEM 83 30 2 285 671
- For locking the diesel crankshaft in its timed position
Important compatibility info
Title | Sharks Teeth Spanner Organiser |
Additional Information
- Sharks teeth spanner organiser takes 20 spanners 420mm long
- Ideal for organising tool cabinet drawers
- Manufactured from composite material with adhesive strips
- Holds 20 Spanners
- Two individual strips for spanner length selection
- 420mm long (595mm version available - Part No 6976)
Important compatibility info
Important compatibility info
Title | Budd Wheel Nut Socket - 21mm |
Additional Information
- Budd wheel nut socket 21mm square (4pt)
- Length 90mm x 3/4in.D
- Extra deep design allows removal of stud and nut
- Impact quality manufactured from Chrome Molybdenum with black phosphate finish
- Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
Important compatibility info
Additional Information
- Cranked spout for easy access on dificult to reach filling points on brake master cylinders and motorcycle engine oil fillers
- Funnel diameter 145mm x 135mm deep
- Angled access - reach 240mm
- Car and van applications include: Brake Master Cylinders on Ford Mondeo, Ford Transit, Vauxhall Insignia & Vauxhall Corsa
- Manufactured from PP Plastic
Important compatibility info
Title | Engine Timing kit - Vauxhall/Opel - 1.0/1.4 Petrol |
Additional Information
- Applications: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo
- Engine codes: 1.0lt LE1/B10XFL,B10XFT, B10XHT AND 1.4LT LV7/B14XE, LE2/B14XHL, B14XHT
- Equivalent to OEM EN-51367, EN-51298, EN-51632
- Year 2014-2017
- Made in Sheffield
Important compatibility info
Title | Pulley Holding Tool Set |
Additional Information
- Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts
- Equivalent to OEM tools T10172A (T10172) and T10554
- Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
Important compatibility info
Additional Information
- Double ended hook and pry bar
- Manufactured from tough composite material
- 4 x Sharp profiles for removing trim from most angles
- Non marking
Important compatibility info
Additional Information
- Application: Ford B-Max, C-Max, EcoSport, Fiesta, Focus, Grand C-Max, Grand Tourneo Connect, Mondeo, Tourneo Connect, Tourneo Courier, Transit Connect, Transit Courier from 2012 onwards
- Engine codes include: 1.0lt EcoBoost M1JA, M1JE, M1JH, SFJA, SFJB, SFJC, SFJD, M1DA, M2DA, M1DD, M2DC, M1JC, M1JJ, P4JA, P4JB, P4JC, P4JD, XMJA, XMJB, XMJC, XMJD, YYJA, YYJB, M2DB, SFDB, M2GA, M2GB, M1CA, M1CB, SFCA, SFCB, SFCC, SFCD
- Equivalent to the Ford OEM tools 303-1611-01 & 303-1611-02
- Use to tighten the crankshaft pulley bolt to the correct torque and angle
Important compatibility info
Title | Torque Multiplier Set |
Additional Information
- Torque multiplier 1/2in. D (F) to 3/4in. D (M)
- Gear ratio 1:9, torque ratio 1:6.5
- Max. torque input 231Nm, max. torque output 1500Nm
- Contents: 1 x torque multiplier, 1 x reaction bar 380mm, 1 x 90 deg reaction bar, 1 x 90 deg reaction base, 2 x break-away adaptor, 1 x hex key
Important compatibility info
Title | Magnetic Parts Tray |
Additional Information
- Size: 64mm x 93mm x 14mm deep
- Manufactured from stainless steel with PVC base to prevent scratching
- 40mm diameter magnet with magnetic power 1000-1200 GAUSS
- Small size makes it suitable for many fixings
- Ideal for a wide variety of trades including automotive, electronics, computers, modelling etc.
Important compatibility info
Title | Air Duster Blow Gun |
Additional Information
- 5m air coiled hose (6mm diameter) with swivel connector
- T shaped connector with bronze ball shut off valve plus T shaped connector with plastic end 6mm dia
- Metal body
- Maximum pressure 140psi
- Designed for cleaning HGV cabs
Important compatibility info
Title | Diesel Injector Remover |
Additional Information
- Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines
- Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
- Engines: 1.6L TDi CR diesel & 2.0L TDi
- Equivalent to: OEM T10402, T10415
- Use in accordance with OEM instructions
- No solenoid removal required
Important compatibility info
Diameter 1/ Diameter 2 | 15/28 mm |
Clutch Equipment | SAC |
Type | Centering Tool, clutch disc |
Manufacturer Restriction | BMW |
Function | Centering Tool, clutch disc |
Hub Diameter | 28 mm |
Important compatibility info
Hub Diameter | 23 mm |
Diameter 1/ Diameter 2 | 15/23 mm |
Clutch Equipment | SAC |
Manufacturer Restriction | BMW |
Function | Centering Tool, clutch disc |
Type | Centering Tool, clutch disc |
Important compatibility info
Hub Diameter | 32.5 mm |
Clutch Equipment | SAC |
Diameter 1/ Diameter 2 | 15/32,5 mm |
Type | Centering Tool, clutch disc |
Manufacturer Restriction | BMW |
Function | Centering Tool, clutch disc |
Important compatibility info
Additional Information 2 | with mounting manual, with technical documentation, with case |
Engine Version | for engines with dual-mass flywheel |
Type | Testing Set, flywheel |
Function | Testing Set, flywheel |
Important compatibility info
Hub Diameter | 26.5 mm |
Diameter 1/ Diameter 2 | 15/26,5 mm |
Clutch Equipment | SAC |
Type | Centering Tool, clutch disc |
Manufacturer Restriction | BMW |
Function | Centering Tool, clutch disc |
Important compatibility info
Replaces | 400007210 |
Type | Mounting Tool Set, clutch/flywheel |
Clutch Equipment | SAC |
Adjustment | with automatic adjustment |
Transmission Type | for manual transmission |
Function | Mounting Tool Set, clutch/flywheel |
Important compatibility info
Clutch Type | for dry clutch |
Transmission Type | Dual-Clutch Transmission |
Only in connection with | 400 0427 10, 400 0419 10, 400 0470 10 |
Manufacturer Restriction | MERCEDES, HYUNDAI, KIA, SKODA, SEAT, AUDI, VW, FORD, GEELY, DACIA, SMART, RENAULT |
Tools | basic tool set |
Transmission ID | D6GF1, 0AM, 0CW, DPS6, 6G-DCT, 6DCT, H-DCT, DC4, DC0 |
Function | Mounting Tool Set, clutch/flywheel |
Transmission Type | 2CT, DSG |
Type | Mounting Tool Set, clutch/flywheel |
Important compatibility info
Clutch Type | for dry clutch |
Tools | Expansion tool set |
Transmission Type | DSG, 2CT |
Only in connection with | 400 0418 10 |
Manufacturer Restriction | VW, AUDI, SKODA, SEAT |
Function | Mounting Tool Set, clutch/flywheel |
Type | Mounting Tool Set, clutch/flywheel |
Transmission ID | 0AM, 0CW |
Important compatibility info
Function | Mounting Tool Set, clutch/flywheel |
Manufacturer Restriction | Volkswagen |
Type | Mounting Tool Set, clutch/flywheel |
Only in connection with | 400 0240 10 |
Important compatibility info
Transmission Type | 2CT |
Clutch Type | for dry clutch |
Tools | Reset tool for double clutch |
Transmission Type | Dual-Clutch Transmission |
Manufacturer Restriction | RENAULT, SMART, DACIA, GEELY, HYUNDAI, KIA, MERCEDES, FORD |
Function | Mounting Tool Set, clutch/flywheel |
Type | Mounting Tool Set, clutch/flywheel |
Transmission ID | DPS6, 6G-DCT, D6GF1, DC0, DC4, H-DCT, 6DCT |
Important compatibility info
Manufacturer Restriction | Ford |
Tools | Expansion tool set |
Transmission ID | DPS6 |
Type | Mounting Tool Set, clutch/flywheel |
Function | Mounting Tool Set, clutch/flywheel |
Transmission Type | 2CT |
Only in connection with | 400 0418 10 |
Clutch Type | for dry clutch |