Workshop Tools

• Made from extra strong carbon fibre composite
• Metric, decimal inch and fraction inch (1/64 in) toggle
• Large LCD display
• x1 SR44 1.5 v battery supplied
• Zero setting in any position

• Accuracy: 0.2 mm
• Calibration: 0-25 mm / 0-1 in
• Reading Accuracy: 0.01 mm / 0.0005 in / 1/64 in

• Large, clear, easy to read LCD display with backlight
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Easy and cost effective to use
• Low and simple maintenance
• Suitable for all applications including tyreshop environments
• Powered by PCL inflation technology and experience
• psi, bar kpa units of pressure selectable by button; last selection saved
• Long battery life with battery level indicator
• Backlight
• Auto power off
• Hand trigger inflate and thumb controlled deflate
• Solid and robust construction

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• Measures pressure in psi / bar / kPa / kgf/cm²
• Measures tyre tread depth in mm / inch
• Auto power off
• Self calibrating

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• Excellent abrasion resistance
• Good flexibility and kink resistant
• Resistance to oil and fuels
• Silicone free
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Working Pressure (1): 300 psi / 21 bar
• Burst Pressure: 63 bar (3:1 safety factor)
• Temperature Range: -10°C to 60°C

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• Polyurethane (PU) material
• Nickel plated 360° swivel fittings
• 200 m straight ends with spring guard
• Hose recoils to a fraction of it's working length
• Range of hose sizes, working lengths and a choice of colour

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

• Used in most workshop/garage environments
• Wide choice of thread and hose tail sizes
• Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
• Case hardened for longer life
• Female Thread Rp 1/4

• Used in most workshop/garage environments
• Wide choice of thread and hose tail sizes
• Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
• Case hardened for longer life

• Nominal Bore 4.8 mm
• Thread Type Male
• Thread Size R 1/4

• Accurate measurement of tread 1-26 mm in 1 mm increments
• 1.6mm illegal tyre tread depth mark
• Department of Transport accepted for MOT testing
• Handy pocket clip

• Approvals: Department of Transport accepted for MOT testing
• Accuracy: +/- 0.25 mm
• Calibration: 1-26 mm

• Includes integral pocket clip and removable protective cap
• Complies with BS EN12645:2014

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• Manufactured with case-hardened mild steel and a zinc-plated finish

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• These caps are used to stop dirt entering the Schrader Valve on tyres
• Can also be used on cycles

• Supplied in Black plastic

• Brush constructed of wood housing wire strands, available in four, three or two rows
• Made from steel strands
• Most commonly used for the cleaning and removal of corrosion on metal

• Brush constructed of wood housing wire strands, available in four, three or two rows
• Made from steel strands
• Most commonly used for the cleaning and removal of corrosion on metal

• Brush constructed of wood housing wire strands, available in four, three or two rows
• Made from steel strands
• Most commonly used for the cleaning and removal of corrosion on metal

• For the safe removal of trim and clips used on modern vehicles
• Anti scratch
• Composite material
• Use on internal and external trim

• Q235 steel copper coated
• For panel pulling
• Consumable
• Essential

• Gravity feed gun filter
• Designed for DeVilbiss, SATA and Iwata spray guns
• 280 micron mesh filters
• Pack of 5

• Ideal for small touch ups, stone chips etc.
• Also useful for applying adhesive or lubricant application
• More economical than paint brushes
• Handle bends to any angle
• Dispenser pack with label

• 59mm in length
• Air Regulator
• For use with Power-TEC spray gun range

• Stainless steel staples
• For use with the Power-TEC hot stapler
• Bag of 100
• Consumable
• Special profile

• Complete with regulator
• Suitable for spot repair

• Built in brush
• Leak protection in liner
• Volume 60ml
• Height 76mm diameter 40mm
• Ideal for body shop use
• Pack of 100

• W shaped staples for use with the Power-TEC Hot Stapler
• Manufactured from stainless steel
• Bag of 100
• Other shapes available

• For use with all glue pulling systems
• REACH Certified
• Made in Europe
• Pack of 15
• Consumable item

• A professional scraper with soft grip handle
• Loaded with single sided blade
• Angled for ease of use
• Ideal for removing stickers, glue etc.
• Takes single sided blades Part No 92301

• Fluted abrasive disc
• Removes stripes/stickers moulding glue etc
• Supplied with an adaptor for drill use
• Max 4000 rpm

Motorcycle tyre care
Tyre inflator designed specifically for motorcycles. Comes with motorcycle-specific battery clamps, terminal rings and DC adaptor, so that you can power it from your bike. Fast tyre care: can inflate a motorcycle tyre in under two minutes.

Accurate inflation
The preset function allows you to set the pressure, and the inflator will automatically stop once this pressure has been reached. This means easier and more accurate inflation. The backlit digital screen clearly shows readings in PSI, bar and kPa. Integrated LED light has white, flashing and red SOS modes, to make inflation at night easier and to attract attention if needed.

• Pre-set pressure mode with automatic cut off
• Inflates a motorbike tyre in under 2 minutes
• High intensity white LED light for night time illumination and red SOS light
• Comes complete with a handy storage case

• Dimensions (MM): H 186 x W 210 x D 88
• Weight (kg): 1.238
• Voltage: 12v DC
• Watts: 120w

• Inflates a tyre in 4.5 minutes
• 40mm diameter analogue pressure gauge in PSI, BAR, kPA
• Flexible air hose with easy access storage compartment specifically designed to reduce kinks
• Screw stem valve connector helps reach awkwardly placed tyre valves
• Fitted with 3m power cable and fused 12V DC power plug to help you reach around the vehicle
• Valve cap storage compartment for safe keeping when inflating
• Flat design gives you maximum stability during use
• Large on/off button for easy use with dirty/greasy hands or in poor lighting conditions
• Complete with 3 piece adaptor kit for bikes, air beds and other inflatables