Workshop Tools

• Features a non-slip ratchet end and non-slip open end
• 8 - 19 mm
• 90 Tooth Count
• Non- Slip Ends
• 6 Point
• 12 Piece
• Full Polish Chrome

• The 90 tooth count gear allows 4 degree arc swing

• Accepts higher feed pressure and torque equalling less breakages.
• Impact resistant ABS case with added rubber corner protection.
• Polished finish reduces friction and extends drill bit life.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• Parabolic web cross section: Large web thickness. Strength built in.
• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• Impact rated socket extensions for facilitated bolt access in restricted areas.
• SHOCKWAVE IMPACT DUTY steel (chrome-molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Precision machined joint for maximum power transmission with optimum leverage for easy and effortless work.
• Induction hardened cutting edges to cut even the hardest of materials.
• Steel blades are fully forged, hardened and tempered for best durability. Grey titanium surface finish is non reflective and ensures maximum corrosion resistance.
• VDE (DIN EN/IEC 60900) certified tools. Tested to 10,000 volts and guaranteed to 1,000 volts. Tested against cold to -40°.
• Ergonomic grip with softgrip for comfortable handling and good grip.

• Interior organiser trays.
• Metal reinforced locking point.
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced top handle for easier carrying (only on the large box).
• IP65 rated weather seal to keep out rain and jobsite debris.
• Metal reinforced corners.
• Part of the PACKOUT™ modular storage system.
• Mounting location for the ONE-KEY™ TICK ™.

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Engine Timing Tool Kit - GM engines.;, Engine Timing Tool Kit - GM engines;,..

• Instructions included
• Also fits Chevrolet Cruze, Orlando 1.4, 1.6, 1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines
• Applications: Astra-G, Corsa-D, Insignia, Mervia, Signum, Vectra-C & Zafira-B 2003-2011
• Engine timing tool kit for GM engines fitted to Vauxhall/Opel and other vehicles 16v 1.6 and 1.8

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

• High quality hot-forging process provides a performance exceeding ASME standard
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight , Zero chamfer box end offer better bite on worn fasterners
• High visibility color filled size mark for easy identification during use
• Full range of Metric sizes for all Professional needs
• Premium Chrome Finish
• Anti-Slip open end
• Zero chamfer box end

• ASME Compliant