Workshop Tools

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• Air compressor included
• Easily cleaned
• Environmentally friendly materials
• TPMS safe
• Quick repair solution
• Particle gel sealant technology

• TPMS Safe
• 12v Compressor
• Max Distance After repair - 200km@ 80km/h, 125miles @ 50mph
• Valve-through technology
• Non Toxic

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Leak Proof Cylinder
• Welded Carry Handle for Easy Transportation
• Safety Valve to Prevent Overloading
• 60mm Extending Screw
• Adjustable Screw to Change Height
• Welded Base Increasing Stability

• TUV

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

• Includes: (17) 2 in. PH: #1, #2(2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25 (2), T-27 (2), T-30 (2), T-40
• Includes: (7) 3 in. PH: #2 (4), Star: T-20, T-25, T-30
• Includes: (3) 1.8 in. Magnetic Nut Driver: 8mm, 10mm, 12mm
• Includes: (1) 2.4 in. Stainless Impact Bit Holder
• Includes: (14) 1.25 in. PH: #1, # 2 (2), # 3, PZ: #1, # 2 (2), #3, Star: T-10, T-15, T-20, T-25, T-27, T-30
• Torsion Zone
• High Quality Materials
• Precision manufacturing
• Laser Etched Sizes

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

General Information

Brake Drum Wear Gauge. Brake Drum Wear Gauge

• Metric and Imperial scale
• Measures drum wear
• Selected steel
• Size range 160mm - 400mm fits a larger range than most similar products on the market
• Brake drum wear gauge

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1500 C) gas torch
• Ergonomic handle for maximum grip

• Conforms to BS:EN521

• Double Locking Pin for Safety
• 10 Position Ratchet Bar
• Stop Tab for Security
• T-Type Welding for Added Durability
• Sold in Pairs
• Ratchet Type

• UKCA /CE

• Durable grip handle with an anti-slip design.
• Strong steel head prevents chipping on contact.
• I-Beam handle construction resists bending.
• Precise balance for better handling and control.
• SHOCKSHIELD grip reduces peak vibration.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufactured from S2 steel for strength
• VDE 1000V tested and certificated
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
• Ideal for use on electric and hybrid vehicles
• Packed in a plastic storage

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• High quality hot-forging process provides a performance exceeding ASME standard
• Popular range of metric sizes fits most circumstances
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• 48 teeth teardrop head design allows for greater applied torque
• Reversible lever allows for quick change between forward and reverse

• Temperature Range: -10°C to 60°C
• Burst Pressure: 63 bar (3:1 safety factor)
• Working Pressure (1): 300 psi / 21 bar
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Silicone free
• Resistance to oil and fuels
• Good flexibility and kink resistant
• Excellent abrasion resistance

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

General Information

Spline Bit 1/2"D M10

• A special bit designed for use on axle shaft removal on Audi and Volkswagen vehicles
• M10 x 800mm - 1/2in. Drive
• Special bit designed for use on axle shaft removal
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

• High quality hot-forging process provides a performance exceeding ASME standard
• Set contains 11 popular 12 points metric sizes for technician
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• 300mm Water Pump Pliers
• 250mm Water Pump Pliers
• 180mm Water Pump Pliers

• Easy push button design allows for variety of sizing to meet the need of various applications

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Ball end for up to 30° access to screw.
• 0
• Twist and lock case for easy access to keys.
• Size identification to easily identify the key.
• Lanyard hole for easy attachment to the Milwaukee lanyard range allowing use at height.

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1630 C) gas torch
• Versatile, multi angle head, ideal for confined areas

• Conforms to BS:EN521

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 12v DC power supply - plugs directly into cigar lighter socket 
• Handy accessory holder for 4 accessories
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Includes bag
• Anti-vibration rubber mounted feet 
• Heavy duty metal cylinder
• Suitable for large cars and 4x4s
• Large precision analogue display (PSI/Bar)
• High speed inflation - 2.5 mins (0-36PSI/175/65/R14)
• Essential for your safety and fuel efficiency
• 12v rapid 4x4 analogue metal compressor can maintain and monitor tyre pressure anywhere and anytime

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Comes With A Handy Carry Case To Store Neatly In Your Boot
• Includes: Tyre Inflator, Tyre Pressure Gauge, Tread Gauge, 1 x Pair Of Protective Gloves, 2 x Cleaning Wipes
• 6 Piece Emergency Tyre Kit

• Conforms with relevant Applicable UK Legislation: Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008 References to the relevant UK Designated Standards used or references to other technical specifications in relation to which conformity is declared: EN 50498:2010

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1300g

• Chrome plated tool increases life by reducing corrosion.
• Hardened jaws for better grip force on jobsite material.
• Large jaws maximize pressure points for range of applications with an efficient, easy one-handed control release.
• TORQUE LOCK™ enables faster set up and extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.