Workshop Tools

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• Class II accuracy.
• Nylon non-reflective bond blade protection, up to 10x more resistant to jobsite damage.
• Anti-tear coating - reinforces the first 15 cm of the blade.
• Overmold gripping area for extra comfort and durability.
• Strong magnet at start of the tape allows easy hooking onto flat surfaces and round pipe.
• Finger stop for comfortable hold and finger protection when the blades retracts.
• Improved standout up to 4.6 m.
• 30 mm blade with double sided printing on tape for easier readability and architect scale provides easy calculating of scaled drawings.
• 2.5 hour of battery run time.
• Charging indicator red/ orange/ green to be able to read out the charging status of the battery.
• Conveniently charge MILWAUKEE Rechargeable internal battery with included micro-USB cable.
• 100 Lumens LED light, to illuminate up to 3 m work area.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Gas regulator
• Single stage two gauge

• Suitable for air & water
• Temp -10C to + 60C
• 21 BAR
• Comes with Yellow Stripe
• 15m coil
• 10.0mm (3/8in.)

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• 48 teeth teardrop head design allows for greater applied torque
• Reversible lever allows for quick change between forward and reverse

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Turn PACKOUT™ into stationary shop storage.
• Multiple mounting configurations.
• Organise your shop together with PACKOUT™ boxes and wall accessories.
• Metal reinforced mounting points for carrying high weights.
• Constructed with impact resistant polymers for highest durability.
• Connects to all MILWAUKEE® PACKOUT™ modular storage.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• These heavy duty CV Boot Clamp Pliers can be used by hand or with the assistance of a power bar and torque wrench if specific torque is required
• PVC dipped handles for comfort
• Suitable for installation of certain clamps on fuel filters, water pumps and other cooling systems

• Ball end for up to 30° access to screw.
• 0
• Twist and lock case for easy access to keys.
• Size identification to easily identify the key.
• Lanyard hole for easy attachment to the Milwaukee lanyard range allowing use at height.

• Easy to follow instructions
• Can be used successfully on the following systems: Tandem master cylinders without sensors Tandem reservoirs, Slave servos, Vacuum Servos
• Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems
• This system sets the standard for affordable brake and clutch bleeding systems

General Information

Spline Bit 1/2"D M10

• A special bit designed for use on axle shaft removal on Audi and Volkswagen vehicles
• M10 x 800mm - 1/2in. Drive
• Special bit designed for use on axle shaft removal
• Socket manufactured from Chrome Vanadium, bit from Silicon Steel

• High quality hot-forging process provides a performance exceeding ASME standard
• Set contains 11 popular 12 points metric sizes for technician
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Serrated jaws for better grip and excellent control.
• Nail puller.
• Deburrer: Deburring ribs on head for up to 20 mm pipe. No need for extra tools.
• Wire cutter: Cuts wires up to 2.5 mm.
• Long nose pliers: Specially suitable for gripping, bending and adjusting in restricted areas.
• Ergonomic and durable overmolded grips add comfort and last longer.
• Made from Chrome Vanadium for best durability and good rust protection.
• Laser hardened durable cutting edges. Extra hardened to 64 HRC.

• Cable diameter (mm): 6
• Cutting capacity in hard wire (mm): 2.5
• Cutting capacity in medium wire (mm): 2.5
• Deburring head max. diameter [mm]: 18
• Jaw length [mm]: 51
• Total length (mm): 210
• Weight (g): 255

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1610 C) gas torch
• Auto lock on and dead man trigger

• Conforms to BS:EN521

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

• Includes: (17) 2 in. PH: #1, #2(2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25 (2), T-27 (2), T-30 (2), T-40
• Includes: (7) 3 in. PH: #2 (4), Star: T-20, T-25, T-30
• Includes: (3) 1.8 in. Magnetic Nut Driver: 8mm, 10mm, 12mm
• Includes: (1) 2.4 in. Stainless Impact Bit Holder
• Includes: (14) 1.25 in. PH: #1, # 2 (2), # 3, PZ: #1, # 2 (2), #3, Star: T-10, T-15, T-20, T-25, T-27, T-30
• Torsion Zone
• High Quality Materials
• Precision manufacturing
• Laser Etched Sizes

• Kit includes: 1 x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
• Thunderweb metal drill bits have a conical shaped web which gets thicker towards the back of the drill bit making them more durable
• 135 degree point angle with split point for precision drilling
• Supplied in a Packout compatible case

• 4932493869

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• 300mm Water Pump Pliers
• 250mm Water Pump Pliers
• 180mm Water Pump Pliers

• Easy push button design allows for variety of sizing to meet the need of various applications