Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Important compatibility info
| 12V Charge Capacity (up to) | 20 Ah - 180 Ah |
| Charge Rate | 12 A |
| 6V Charge Capacity (up to) | 20 Ah - 180 Ah |
| Trickle Charge | No |
| Charging Voltage | 12 V |
£71.08
Important compatibility info
| Length | 465 mm |
| Width | 148 mm |
| Function | Mounting Tool, bellow |
| Weight | 2 kg |
| Extra Description | Duraboot |
| Type | Mounting Tool, bellow |
Additional Information
Safety information
Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.
Installation Information
Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.
£98.78
Important compatibility info
| Function | Pipe Cutter |
| Type | Pipe Cutter |
£19.80
Important compatibility info
| Title | PWM Adapter Tip for Pulse Modulation Width Measurement |
Additional Information
- ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
- COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
- EASY INSTALL by removing power probe tip and inserting adapter into banana jack
- GREAT FOR diagnosing circuit fan issues
- Voltage Range: Operates between 9V and 24V DC
- Current Capacity: Maximum 40A output
- Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
- Duty Cycle Range: Adjustable from 0% to 100%
- Input Protection: Overvoltage and reverse polarity protection
- Output Control: Variable output power via rotary dial
- Dimensions: Compact enclosure design for portability
- Connection Interface: Equipped with standard terminals for easy wiring
- Operating Temperature: -20°C to 60°C
- Housing: Durable and lightweight for automotive or workshop use
- Indicators: LED indicators for power status and output activity.
£58.86
