Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 59 of 153
Results 581 - 590 of 1524
Part number: AT2071H
Important compatibility info
| Title | DIY Auto Start Blow Torch |
Additional Information
If you are looking for a quality and reliable blow torch, then look no further! This auto start blow torch features a stable powerful fine flame, a rapid 1 minute warm up, and Piezo ignition. It is simple and safe to use, ideal for general DIY, paint stripping, plumbing and intermediate soldering. With over 20 years of experience, GoSystem Limited is committed to technological advancement in the specialist portable gas appliance market. Their new product development programme covers a variety of blow torches & portable gas stoves, all designed and tested to comply with relevant European and international standards.
Need a handy tool? Then look no further! The Auto Start Blow Torch features a stable powerful fine flame (up to 1400°C), a rapid 1 minute warm up, use at any angle and an Auto Start Piezo Ignition. Simple and safe to use. Ideal for general DIY, paint stripping, plumbing and intermediate soldering. With over 20 years of experience, GoGas Limited is committed to technological advancement in the specialist portable gas appliance market. Their new product development programme covers a variety of blow torches & portable gas stoves, all designed and tested to comply with relevant European and international standards.
- Gas cartridge sold separately
- For use with G2350 or 2175A Go System threaded gas cartridges
- Safety checked and test burned
- Ideal for general DIY, paint stripping, plumbing and intermediate soldering
- Stability base included
- Simple and safe to use
- Auto start Piezo ignition
- Rapid 1 minute warm up, use at any angle with precise flame control
- Stable powerful fine flame (up to 1400 C)
- Conforms to BS:EN521
ONLY
£24.83
£24.83
Part number: 400004610
Important compatibility info
| Hub Diameter | 23 mm |
| Diameter 1/ Diameter 2 | 15/23 mm |
| Clutch Equipment | SAC |
| Manufacturer Restriction | BMW |
| Function | Centering Tool, clutch disc |
| Type | Centering Tool, clutch disc |
ONLY
£24.83
£24.83
Part number: LAS38C
Important compatibility info
| Title | Socket Holder, Carlyle Tools |
Additional Information
Socket Holder, Carlyle Tools
- Accommodates all sizes of powered sockets
- Holds shallow or deep sockets
- Locks sockets in place by a simple twist to the right
- Lock-a-Socket[TM] is the most versatile product for socket organization. The underside contains a full-length, high-powered, non-adhesive magnetic strip that securely attaches the socket holder to almost any clean, smooth metal surface.
- Socket Holder
- Carlyle Tools
ONLY
£24.79
£24.79
Part number: CIS0138M
Important compatibility info
Additional Information
1in Drive 38mm 6 PT Impact Socket
- Radius corner on working end provides better gripping of fastener
- Chamfered drive opening smooths connection between socket and drive tool
- Made from Chrome Molybdenum Alloy Steel for strength and durability
- Black phosphate finish resists corrosion
- For use with impact power / air tools
- Radius Corner Design
- Chamfered Drive Opening
ONLY
£24.67
£24.67
Part number: 4932480416
Important compatibility info
| Title | SHOCKWAVE Hex Socket 41 mm 1in. STD - 1pc |
Additional Information
SHOCKWAVE™ Hex Socket 41 mm 1in. STD - 1pc
- SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
- Dual hole design and groove for security accessories.
- Best fitting thanks to 6 gripping points.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Non-slip hex geometry to prevent socket and fastener rounding.
ONLY
£24.67
£24.67
Part number: 4932480045
Important compatibility info
| Title | 1/2 Drive Socket Metric Deep-27MM |
Additional Information
1/2 Drive Socket Metric Deep-27MM
- Chrome finish.
- Stamped sizes for easy visibility.
- Wrench ready FOUR FLAT sides.
- Flour flat sides on socket deter rolling.
ONLY
£24.62
£24.62
Part number: 4932480379
Important compatibility info
| Title | Hex socket ShW 3/4 deep 19mm-1pc |
Additional Information
Hex socket ShW 3/4 deep 19mm-1pc
- Dual hole design and groove for security accessories.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Best fitting thanks to 6 gripping points.
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
ONLY
£24.59
£24.59
Part number: 4932480408
Important compatibility info
| Title | Hex socket ShW 1in STD 27mm-1pc |
Additional Information
Hex socket ShW 1in STD 27mm-1pc
- Dual hole design and groove for security accessories.
- Stamped and ink filled diameter markings and laser etched part number for wear resistance.
- Non-slip hex geometry to prevent socket and fastener rounding.
- Best fitting thanks to 6 gripping points.
- SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
ONLY
£24.49
£24.49
Part number: CFNW5M
Important compatibility info
| Title | 5 PC Metric Flare Nut Wrench Set |
Additional Information
- High quality hot-forging process provides a performance exceeding ASME standard
- Ultra thick 6 points open end provides durable performance
- High visibility colour filled size mark for easy identification during use
- ASME Compliant
- Premium Chrome Finish
- 15 degree offset dual open end
- ASME Compliant
ONLY
£24.43
£24.43
Part number: CWLNS111M
Important compatibility info
| Title | Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm |
Additional Information
Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm
- Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
- Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
- Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
- Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.
- Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm
ONLY
£24.39
£24.39
Page 59 of 153
Workshop Tools
