Workshop Tools

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Product Dimensions (L x W x H): 24 x 15 x 8.5cm
• Max Pressure (PSI): 100psi
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance

• Conforms to EN16051:2012

General Information

Replacement Stones Replacement Stones.

• For use with Brake cylinder hone (Part No 2243)
• Sold as single
• Spare Stones

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 6mm wide
• Removes the damaged steel cord
• Used in the preparation of a tyre repair

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• Complies with BS EN12645:2014
• Includes integral pocket clip and removable protective cap

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• 6in. Long
• Insulated, dual layered TPR handles protect user from electrical shock
• Hardened, CR-MO jaws for added strength and durability
• Insulated (Anti-Electric Shock)

• Red and Yellow color symbolize the international color for safety
• 1,000 Volt AC or 1,500 Volt DC certified to IEC60900
• Ergonomic handle design for superior comfort during use

• High carbon alloy steel,Face finish: black+polish,Jaw capacity 50mm Max.
• Grip tie by squeezing lower jaw handle. One hand wrenching.
• Machined parts with 16 smooth position adjustments.
• Press the PUSH button for smooth position adjustments.
• Pinch proof design.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Permanent epoxied fiberglass handle provides superior balance and reduced shock and fatigue
• Hardened steel Ball-Peen hammer head
• Rounded Ball-Peen end allows for pounding out round surfaces and peening over bolts