Workshop Tools

• Constructed with a 8 Tpi design for fast starts and smooth cuts large gullets for easy chip ejection and a unique carbide blend the TORCH Blades with NITRUS CARBIDE are designed to last the longest and cut the fastest in cast iron / SML pipe and other thi
• This special carbide NITRUS blend is designed to cut 3x longer than existing standard carbide teeth blades.
• Best performance in all thick metals and especially cast iron soil waste and drainage pipes
• 25 mm blade height for improved stability and minimum vibration.
• The TORCH blades with NITRUS CARBIDE teeth is the next generation of carbide technology.
• Thick 1.27 mm robust blade body for precise straight cuts.

• Slim shank diameter for access to low lying screw applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Anti role 3 sided collar on the handle
• VDE tested to 10 000 V and guaranteed to 1,000 V.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.

• Steel reinforced handle for higher durability.
• Precision balanced design and over molded handle for more control and better grip.
• High-performance cover preventing damage to surfaces.
• Steel shot-filled head for increased rebound reduction and maximised impact.

• 48 teeth teardrop head design allows for greater applied torque
• Reversible lever allows for quick change between forward and reverse

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

General Information

Cambelt Tool Kit - for VAG Petrol FSI 1.4, 1.6

• Made in Sheffield
• This kit is suitable for use with the following replacement Cam-belt kits INA 530008910, Contitech CT957K1, Gates K025565XS
• Use one belt to transfer the drive across the camshafts depending on the engine specification the cam setting pins may be used with or without the crossbar provided
• A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6 FSi petrol engines found across the VAG ranges from 1999 to 2008 these engines

• Suitable for air & water
• Temp -10C to + 60C
• 21 BAR
• Comes with Yellow Stripe
• 15m coil
• 10.0mm (3/8in.)

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Slim profile head with flush direction lever offers better accessibility.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• Class II accuracy.
• Nylon non-reflective bond blade protection, up to 10x more resistant to jobsite damage.
• Anti-tear coating - reinforces the first 15 cm of the blade.
• Overmold gripping area for extra comfort and durability.
• Strong magnet at start of the tape allows easy hooking onto flat surfaces and round pipe.
• Finger stop for comfortable hold and finger protection when the blades retracts.
• Improved standout up to 4.6 m.
• 30 mm blade with double sided printing on tape for easier readability and architect scale provides easy calculating of scaled drawings.
• 2.5 hour of battery run time.
• Charging indicator red/ orange/ green to be able to read out the charging status of the battery.
• Conveniently charge MILWAUKEE Rechargeable internal battery with included micro-USB cable.
• 100 Lumens LED light, to illuminate up to 3 m work area.

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• Gas regulator
• Single stage two gauge

• High quality hot-forging process provides a performance exceeding ASME standard
• Popular range of metric sizes fits most circumstances
• High visibility color filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

General Information

Spanner Extension Wrench Spanner Extension Wrench.

• Gloves and goggles should be used in high powered situations
• Manufactured from Chrome Vanadium with high Chromed finish
• Universal use
• Length 385mm
• Extends the length of spanners when you need more leverage

• Manufactured from S2 steel for strength
• VDE 1000V tested and certificated
• Sizes: T10, T15, T20, T25, T27, T30, T40, T45, T50
• Ideal for use on electric and hybrid vehicles
• Packed in a plastic storage

General Information

Thread Repair Kit M10x1.5 Thread Repair Kit M10x1.5.

• Spare insert packs available
• For repairing and restoring damaged threads
• Kit includes insertion tool, HSS drill, HSS tap and three threaded inserts

• M10 x 1.5

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Durable grip handle with an anti-slip design.
• Strong steel head prevents chipping on contact.
• I-Beam handle construction resists bending.
• Precise balance for better handling and control.
• SHOCKSHIELD grip reduces peak vibration.

• Double Locking Pin for Safety
• 10 Position Ratchet Bar
• Stop Tab for Security
• T-Type Welding for Added Durability
• Sold in Pairs
• Ratchet Type

• UKCA /CE