Workshop Tools

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5 degree arc swing allowing access in tighter spaces.
• MAX BITE open-end grip reduces rounding and stripping.
• 180 degree pivoting head for greater access to tight spaces.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• Essential service tool
• Bi Hex in 1/2in. drive
• Correctly hardened and tempered
• Made from Chrome Molybdenum
• 46mm Bi-hex with 1/2in. drive. 100mm long

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Pin-less design for increased durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Swivel for access In hard to reach places.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1300g

• Features an ergonomic handle for added comfort
• Hinged joint allows wrench head access around obstructions
• Reaches hard-to-get-at nuts and bolts

• Ratchet Teardrop Flex Quick Release 1/2in. Carlyle Hand Tools

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish for corrosion and rust protection.
• Durable and compact storage rack to optimize space inside the drawer.
• Laser engraved size ID for quick and easy identification.
• Precision knurling located on the shaft and female drive end for better control when hand threading.

• 12v DC power supply - plugs directly into cigar lighter socket 
• Handy accessory holder for 4 accessories
• Compact hose and power cord storage - air hose -50cm, power cord - 3m
• Max pressure range - 0-150PSI
• Quick release connector valve 
• Multiple adaptors included 
• Portable and compact
• Includes bag
• Anti-vibration rubber mounted feet 
• Heavy duty metal cylinder
• Suitable for large cars and 4x4s
• Large precision analogue display (PSI/Bar)
• High speed inflation - 2.5 mins (0-36PSI/175/65/R14)
• Essential for your safety and fuel efficiency
• 12v rapid 4x4 analogue metal compressor can maintain and monitor tyre pressure anywhere and anytime

• Chrome plated tool increases life by reducing corrosion.
• Hardened jaws for better grip force on jobsite material.
• Large jaws maximize pressure points for range of applications with an efficient, easy one-handed control release.
• TORQUE LOCK™ enables faster set up and extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.

• Knurled grip
• Adaptor sizes: 15, 16, 17, 19, 20, 21, 25mm
• Includes cone adaptor for sizes over 25mm
• Aligns clutch disc when replacing the assembly
• Complete with 7 adaptors

• Socket and installing ring for replacing the suspension joint on Mercedes M Class front and rear suspension
• 3/4in. drive
• Complete with installing ring
• Once the joint is fitted, the installing ring supplied with the socket is removed and the ring supplied with the joint, which has thread lock compound, is fitted to secure the joint permanently

• Comes With A Handy Carry Case To Store Neatly In Your Boot
• Includes: Tyre Inflator, Tyre Pressure Gauge, Tread Gauge, 1 x Pair Of Protective Gloves, 2 x Cleaning Wipes
• 6 Piece Emergency Tyre Kit

• Conforms with relevant Applicable UK Legislation: Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008 References to the relevant UK Designated Standards used or references to other technical specifications in relation to which conformity is declared: EN 50498:2010

• Consumable item
• Pack of 15
• Made in Europe
• REACH Certified
• For use with all glue pulling systems

• 200mm Combination Slip Joint Pliers
• 200mm Long Nose Pliers
• 178mm HD Diagonal Pliers
• 300mm Groove Joint Pliers

• Long Nose Pliers offer crosshatch jaw design for stronger grip

• Compact design ideal for versatile cutting in tight spaces.
• Rubber overmold grip for increased comfort.
• Adjustable blade length for easier flush cutting.
• Supplied with 10″ / 24 Tpi blade.
• Accepts 12″ blades.
• Tool free blade change for changing blades up to 10x faster.

• Anti role, 3 sided collar on the handle
• Hardened magnetic tips for maximum durability and fastener retention.
• Landyard hole for easy attachment to a safety system.
• Permanent visible ID markings allows for quick tool identification.
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Wrench ready shank allows extra leverage to be applied.

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Dual-material rubber retainer prevents wear down and enables secure hold.

• Stores up to two drills, impact wrenches and other power tools.
• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and quick access to your tools.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

General Information

Socket 3/4"D - 65mm Socket 3/4"D - 65mm.

• Manufactured in Chrome Vanadium
• Introduced specifically for the hub nuts on Transit vans > 1988

• Supplied on a magnetic rail.
• The lug nut sockets are thin-walled for easy access in tight wheel assemblies.
• Made from high quality alloy steel for strength and durability.
• Colour coded for easy identification.

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Auto start Piezo ignition
• Swirl flame for more even heat distribution, wrapping around the target
• Instantly FLARESAFE; use at any angle
• A durable high power, high temperature (up to 1630 C) gas torch
• Versatile, multi angle head, ideal for confined areas

• Conforms to BS:EN521

• Workshop manual must be consulted when using this tool
• Suitable for Volkswagen and Audi vehicles
• Composite handle
• Assembly lever for use on DSG gear boxes
• Designed for DSG 7 speed dual clutch gearboxes fitted to VAG vehicles

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• Rounded I-Beam handle for comfortable handling grip.
• 180° pivoting head for greater access to tight spaces.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Chrome alloy steel, chrome plated.
• Durable double stacked pawls for longer ratchet life.
• 144 ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.
• Ink-filled labels for better visibility.

• The right angle attachment is a useful device for screwdriving or drilling applications in restricted difficult to reach areas.
• Internal SHOCK ZONE and advanced gear design for excellent power transmission and impact durability.
• Ergonomic rubber overmold for secure and comfortable handling.
• Pack contains 1 x right angle attachment and 10 x 25 mm screwdriving bits.
• Very compact design: only 36 mm in height and a true 90dg angle to allow access into confined spaces.
• For all 1/4in. Hex driving and drilling accessories.
• Impact rated: suitable to use with latest 18V impact drivers as well as cordless drill drivers.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Durable grip handle with an anti-slip design.
• Strong steel head prevents chipping on contact.
• I-Beam handle construction resists bending.
• Precise balance for better handling and control.
• SHOCKSHIELD grip reduces peak vibration.

• Stored on a socket rail for better tool organization
• Chrome finish for easy cleaning and corrosion protection
• Stamped sizes for easy visibility
• Wrench ready FOUR FLAT sides
• FOUR FLAT sides on socket deter rolling

• 300mm Water Pump Pliers
• 250mm Water Pump Pliers
• 180mm Water Pump Pliers

• Easy push button design allows for variety of sizing to meet the need of various applications

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• One hand locking mechanism.
• Made from forged alloy steel for best durability – Cr Steel.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Triple cutting direction identification – on the head, handle and by colour coded handle.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Thumb and forefinger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Extra long aviation snips: For longer and straighter cuts in one go.
• Offset snips: For long continuous straight or curved cuts. 45° offset keeps users hand away from the cutting material.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Serrated cutting edges prevent slippage when cutting.
• Flush slimline design for non-snagging in material.

• Pressure release function. 45° chuck with 360° swivel, Stainless steel flexi hose (330mm) and rubber boot
• Tyre depth measurement 0- 10mm
• Accuracy plus/minus 3%
• 0-130 psi (0-800kpa) - (1BAR=100kpa)
• Dual faced gauge 50mm diameter

General Information

Engine Cylinder Hone 51-250mm. Engine Cylinder Hone 51-250mm

• Use with cordless drill for efficient results
• Replacement stone set Laser Part No. 2071 (consumable)
• Flexible self-aligning shaft allows use without removing cylinder
• Cleans and de glazes cylinders of carbon deposits quickly and effectively
• Adjusts from 51mm to 260mm

• Kit includes: 1 x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm
• Thunderweb metal drill bits have a conical shaped web which gets thicker towards the back of the drill bit making them more durable
• 135 degree point angle with split point for precision drilling
• Supplied in a Packout compatible case

• 4932493869

• Includes: (17) 2 in. PH: #1, #2(2), #3, PZ: #1, #2, #3, Star: T-10, T-15, T-20, T-25 (2), T-27 (2), T-30 (2), T-40
• Includes: (7) 3 in. PH: #2 (4), Star: T-20, T-25, T-30
• Includes: (3) 1.8 in. Magnetic Nut Driver: 8mm, 10mm, 12mm
• Includes: (1) 2.4 in. Stainless Impact Bit Holder
• Includes: (14) 1.25 in. PH: #1, # 2 (2), # 3, PZ: #1, # 2 (2), #3, Star: T-10, T-15, T-20, T-25, T-27, T-30
• Torsion Zone
• High Quality Materials
• Precision manufacturing
• Laser Etched Sizes

• Rust protection: Chrome plated tool increases life by reducing corrosion.
• Lever release design: Traditional release lever for jobsite convenience.
• TORQUE LOCK™: Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK™ screw for better and more secure grip. Can also be used for hanging / storage purposes.
• Hardened jaws: Better grip force on jobsite material.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.