Workshop Tools

General Information

High Voltage Floor Matting - 1 Metre. High Voltage Floor Matting - 1 Metre

• Flame retardant oil and acid resistant insulated floor matting
• Tested to IEC611111 Class 2 rated for working voltages up to 17kV
• Ribbed on the underside fabric impression on upper side

• Dimensions: Width 1000mm, Thickness 3.00mm, Weight 4.0kgs per metre

General Information

Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi. Vibration Damper Pulley Puller - Ford 2.0 Ecoblue TDCi

• Performs the function of OEM 205-295 (puller), 204-158-01 (crankshaft nose protector spigot) for the applications listed only
• Application: Ford Transit, Transit Custom and Tourneo Custom Ecoblue TDCi, AWD, FWD, RWD 2016 onwards Engine codes: YLFS, YMFS, YNFS, YLF6, YMF6, YNR6, YMR6, YLR6, YNF6
• Removes the front pulley to gain access to the timing belt area

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2016
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 13.8 bar / 200 psi Inflation Flow: 500 l/min / 18 cfm Operating temperature: -25 to 55 °C Hose Length: 2.7 m / 9ft Tyre Valve Connection: Twin clip-on Calibration: 0-138 psi / 0-9.6 bar

General Information

Crankshaft Locking Kit - Ford 2.2. Crankshaft Locking Kit - Ford 2.2

• Applications: Econetic and HDT engines
• Used to lock and time the crankshaft and flywheel to allow the TDC sensor position to be set after removal when servicing the cam chain drive system
• Ford Transit 2.2 2006<
• TDCI crankshaft locking kit

General Information

Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol Engine Timing Kit - Vauxhall/Opel 1.0/1.4 Petrol.

• Made in Sheffield
• Year 2014-2017
• Equivalent to OEM EN-51367, EN-51298, EN-51632
• Engine codes: 1.0lt LE1/B10XFL,B10XFT, B10XHT AND 1.4LT LV7/B14XE, LE2/B14XHL, B14XHT
• Applications: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo

• Impact rated socket extensions for facilitated bolt access in restricted areas.
• SHOCKWAVE IMPACT DUTY steel (chrome-molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Type M: Cone for angled edges and narrow contours.
• Type H: Flame for contouring.
• Type D: Ball for milling holes and creating concave cuts.
• Type C: Cylindrical ball nose for top and side cutting.
• Includes: Types B ,C ,D, H, M.
• Suitable for unhardened and hardened steel, cast iron and non ferrous metals (aluminium, brass, copper).
• Double cut toothing geometry ensures excellent material removal, low vibrations for easier handling and smaller swarfs.
• According to DIN 8033.

General Information

Engine Timing Tool Set - Fiat 0.9 Twinair Engine Timing Tool Set - Fiat 0.9 Twinair.

• Made in Sheffield
• OEM cross reference to component
• For engine codes 312A2 000
• For engines fitted to Fiat Panda/Punto/500/500c, Alfa Romeo Mito and Lancia Ypsilon models
• Chain driven engines

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Permanent visible ID markings allows for quick tool identification
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Slim shank diameter for access to low lying screw applications
• VDE tested to 10000 V and guaranteed to 1000 V

• Accepts higher feed pressure and torque equalling less breakages.
• Impact resistant ABS case with added rubber corner protection.
• Polished finish reduces friction and extends drill bit life.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• Parabolic web cross section: Large web thickness. Strength built in.
• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Supplied with polishing pad, sanding pad, polishing sponge white, polishing sponge yellow, lambswool, side handle
• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLITHIUM battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Detachable 2 position side handle
• Spindle lock allows fast, tool free accessory change
• Compact design with only 130 mm allows access to hard areas
• Long run time allows frequent task completion with one battery charge
• Large capacity of 76 mm polishing sponge and 50 mm sanding pad size for fast job completion
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Variable 2 speed selection (0-2800 / 0-8300 RPM) for both polishing and sanding applications