Workshop Tools

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 11 mm

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

General Information

Budd Wheel Nut Socket 21mm Sq. Budd Wheel Nut Socket 21mm Sq

• Suitable for front and rear axle wheels on many imported trucks including Isuzu, Mitsubishi Fuso and Hino
• Impact quality manufactured from Chrome Molybdenum with black phosphate finish
• Extra deep design allows removal of stud and nut
• Length 90mm x 3/4in.D
• Budd wheel nut socket 21mm square (4pt)

General Information

Glow Plug Socket Set 1/4"D 3pc Glow Plug Socket Set 1/4"D 3pc.

• Sizes: 8mm, 9mm, 10mm
• Features 1/4in. Drive and universal joint
• Manufactured from Chrome Vanadium
• Super slim for improved access in tight areas

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 300mm (12in.)

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 450 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Forged designs for rust protection and increased durability
• Comfort grips that will not peel
• Versatile 89mm jaw capacity in a compact 229mm size, offering a solution for multiple plumbing and automotive applications

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end

• ASME Compliant

• Pack 2 Pces
• For use with conventional & pneumatic grease gun hosing
• Slide-on / Knuckle Joint Type
• Swivel Connector

• Accommodates all sizes of powered sockets
• Holds shallow or deep sockets
• Locks sockets in place by a simple twist to the right
• Lock-a-Socket[TM] is the most versatile product for socket organization. The underside contains a full-length, high-powered, non-adhesive magnetic strip that securely attaches the socket holder to almost any clean, smooth metal surface.

• Socket Holder
• Carlyle Tools

• Made in Sheffield.
• Essential tool.
• Selected steel.
• Suitable for use on 1 Series E81,82,87,88, 3 Series E90,91,92,93 & 5 Series E60,61,X3 E83 X1.
• Equivalent to OEM Ref 11 8 740.

• Set also features short hex arm for tight fit access, and color coded hex key holder for convenient storage and identification.
• Keys feature ball on long arm which allows better angle of entry for hard to reach areas plus fastener control.
• Made from durable chrome vanadium w/ rugged black phosphate finish for long life and added strength.

• Hex Key Set Long Ball Short & Long Arm Metric & SAE Carlyle Hand Tools

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 850g

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Deep Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 7 CFM
• Air pressure: 3BAR / 50PSI
• Gravity fed spray gun

• Key handle allows compressor to be tightened
• Time saver
• Allows piston and ring assembly to slide into the bore minimizing damage
• For installing piston and ring assembly into the bore
• For pistons 53mm to 125mm

General Information

Oil Filter Pliers 50mm-114mm

• Serrated jaws for additional grip on oily surfaces
• Soft grip handles
• Black treated Steel
• Handles filter diameter of 50mm - 114mm
• Long handled oil filter pliers

• Position Locking Pin
• in.Rin. Pin Prevents Locking Pin Slipping Out
• Flat Top Rubber Saddle for Smooth Engagement
• Triangular Base for Added Stability
• Sold in Pairs
• Folding Type

• UKCA /CE

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.