Workshop Tools

• Qty: 2
• 1/8in. Gas BSP Male
• Flexible rubber
• Swivel ends

• 300mm (12in.)

General Information

Flameless Hot Air Blower. Flameless Hot Air Blower

• Net weight without gas 68 grams. Dimensions 110 x 27 x 85mm
• Fueled by 5.5ml butane gas which is available from newsagents and supermarkets (cigarette lighter gas)
• Includes heat shrinking tubes
• Run time approximately 20-25 minutes (at mid setting)
• Variable heat/temperature range up to 650 degrees C
• Features: Instant electronic ignition, refillable tank with see through window, stable catalytic heating system. Stable catalystic heating system

• Variable heat/temperature range up to 650 degrees C
• Run time approximately 20-25 minute
• Net weight without gas 68 grams
• Dimensions 110 x 27 x 85mm

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 450 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• The unique single pawl design prevents the Gear from slipping during high-speed turning.
• The ratchet gear mechanism head is and designed with High-grade Cr-MO material, providing extra strength and durability.
• The tool has a Super Rust-Resistant finishing, proven through a Salt Spray Test that lasted over 72 hours.
• The handle features a unique ergonomic design made of two components for enhanced comfort.
• The 120-Tooth reversible ratcheting mechanism allows for a minimal sweep of 3 degrees, enabling usage in tight spots.
• The Heavy Duty New Index Flex head mechanism offers the option to fix the head or use it in a flexed position.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Forged designs for rust protection and increased durability
• Comfort grips that will not peel
• Versatile 89mm jaw capacity in a compact 229mm size, offering a solution for multiple plumbing and automotive applications

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• High quality hot-forging process provides a performance exceeding ASME standard
• Ultra thick 6 points open end provides durable performance
• High visibility colour filled size mark for easy identification during use
• ASME Compliant
• Premium Chrome Finish
• 15 degree offset dual open end

• ASME Compliant

• Pack 2 Pces
• For use with conventional & pneumatic grease gun hosing
• Slide-on / Knuckle Joint Type
• Swivel Connector

• Accommodates all sizes of powered sockets
• Holds shallow or deep sockets
• Locks sockets in place by a simple twist to the right
• Lock-a-Socket[TM] is the most versatile product for socket organization. The underside contains a full-length, high-powered, non-adhesive magnetic strip that securely attaches the socket holder to almost any clean, smooth metal surface.

• Socket Holder
• Carlyle Tools

• Made in Sheffield.
• Essential tool.
• Selected steel.
• Suitable for use on 1 Series E81,82,87,88, 3 Series E90,91,92,93 & 5 Series E60,61,X3 E83 X1.
• Equivalent to OEM Ref 11 8 740.

• Set also features short hex arm for tight fit access, and color coded hex key holder for convenient storage and identification.
• Keys feature ball on long arm which allows better angle of entry for hard to reach areas plus fastener control.
• Made from durable chrome vanadium w/ rugged black phosphate finish for long life and added strength.

• Hex Key Set Long Ball Short & Long Arm Metric & SAE Carlyle Hand Tools

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 850g

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 & 19 mm
• Deep Metric Socket Set
• 12 Points
• Socket set features mirror polish Chrome-Plated finish for rust resistance

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet ANSI, DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Meet DIN torque spec.
• 180 degrees flex head & extra long beam offers extreme reach and loads of leverage.
• Ratcheting box ends are designed to accommodate a variety of fasteners including both 6-and 12-point nuts.
• Reversible wrenches feature an easy-to-use reversing mechanism
• Wrenches feature a sleek, offset-head design for tight access points, slim dimensions for confined areas.

• SHOCKWAVE™ IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Best fitting thanks to 6 gripping points.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.

• Stainless steel needle and nozzle
• Pressure trigger and air control screw
• Cup Capacity: 600ml
• Air Consumption: 7 CFM
• Air pressure: 3BAR / 50PSI
• Gravity fed spray gun

• Key handle allows compressor to be tightened
• Time saver
• Allows piston and ring assembly to slide into the bore minimizing damage
• For installing piston and ring assembly into the bore
• For pistons 53mm to 125mm

General Information

Oil Filter Pliers 50mm-114mm

• Serrated jaws for additional grip on oily surfaces
• Soft grip handles
• Black treated Steel
• Handles filter diameter of 50mm - 114mm
• Long handled oil filter pliers

• Position Locking Pin
• in.Rin. Pin Prevents Locking Pin Slipping Out
• Flat Top Rubber Saddle for Smooth Engagement
• Triangular Base for Added Stability
• Sold in Pairs
• Folding Type

• UKCA /CE

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Gas cartridge sold separately
• Requires filling prior to use with 3185 Go System butane aerosol gas
• Safety checked and test burned
• Applications include electrical, jewellery, automotive, household repair, lock thawing and many more
• Ideal for intricate soldering with a finely adjustable needle flame
• Patented childproof design
• Instantly FLARESAFE, simple and safe to use at any angle
• Compact butane refillable gas torch (up to 1350 C) with push button auto ignition

• Conforms to BS:EN521