Workshop Tools

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Permanent epoxied fiberglass handle provides superior balance and reduced shock and fatigue
• Hardened steel Ball-Peen hammer head
• Rounded Ball-Peen end allows for pounding out round surfaces and peening over bolts

• Provides access in awkward areas
• Strap filter wrench for removing oil filters with a diameter up to 135mm
• Ergonomic handle
• Self adjusting & heavy duty

• High carbon alloy steel,Face finish: black+polish,Jaw capacity 50mm Max.
• Grip tie by squeezing lower jaw handle. One hand wrenching.
• Machined parts with 16 smooth position adjustments.
• Press the PUSH button for smooth position adjustments.
• Pinch proof design.

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Qty: 50
• Straight Profile
• Metric Thread

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• High quality hot-forging process provides a performance
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight , Zero chamfer box end offer better bite on worn fasterners
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• Anti-Slip and radius corners on open end
• Zero chamfer box end

• ASME Compliant

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening
• Chrome Molybdenum Alloy Steel
• Phosphate Outer Finish

• Chrome Molybdenum Alloy Steel

• 6mm wide
• Removes the damaged steel cord
• Used in the preparation of a tyre repair

General Information

Replacement Stones Replacement Stones.

• For use with Brake cylinder hone (Part No 2243)
• Sold as single
• Spare Stones

• Product Dimensions (L x W x H): 24 x 15 x 8.5cm
• Max Pressure (PSI): 100psi
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance

• Conforms to EN16051:2012

General Information

Drain Plug Wrench 8mm x 10mm Square

• For use on Peugeot, Renault and Volvo
• Ideal for use on back axle, gearbox
• Manufactured from forged and selected steel
• Suitable for Peugeot, Renault, Volvo

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Lanyard hole for easy attachment to the Milwaukee safety range to allow use at heights.
• Ball detent for a secure hold onto sockets.
• Anti-roll protection due to TRI-LOBE design.
• Ergonomically shaped TRI-LOBE handle design to comfortable apply high torque.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all batteries.
• Clip in batteries for secure storage.

• Proprietary steel and heat treat process for maximum strength and durability.
• Heavy duty construction for fastening capabilities in all impacts.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Push button quick release
• Made of high-strength alloy steel with chrome-plated finish
• Ratchets have slim profile for use in tight spots
• Quick release button
• Polished Chrome grip ratchet

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Velcro backing pad for a fast and easy polishing sponge change within seconds
• Fits with both MILWAUKEE® M18 FUEL™ Random Orbital Polishers - M18 FROP15 & M18 FROP21

• Includes Tips: @0-Degree: 0.95 & 1.2mm, 1.2 & 1.8mm @45-Degree: 1.2mm @90-Degree: 1.2mm
• External: 6 - 20mm
• Internal: 8 - 24mm
• Heavy-Duty Return Spring
• Convert from Working with External to Internal Snap Rings

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing