Workshop Tools

• ADJUSTABLE DUTY CYCLE from 5% to 100% with side buttons
• COMPATABLE WITH all Power Probe models with a 4mm banana jack in/out
• EASY INSTALL by removing power probe tip and inserting adapter into banana jack
• GREAT FOR diagnosing circuit fan issues

• Voltage Range: Operates between 9V and 24V DC
• Current Capacity: Maximum 40A output
• Frequency Range: Adjustable pulse width modulation (PWM) frequency from 10Hz to 200Hz
• Duty Cycle Range: Adjustable from 0% to 100%
• Input Protection: Overvoltage and reverse polarity protection
• Output Control: Variable output power via rotary dial
• Dimensions: Compact enclosure design for portability
• Connection Interface: Equipped with standard terminals for easy wiring
• Operating Temperature: -20°C to 60°C
• Housing: Durable and lightweight for automotive or workshop use
• Indicators: LED indicators for power status and output activity.

Safety information

Safety First Read the operating and safety instruction. Follow them carefully. Maximum safe operating pressure 9 bar (125 psi). Air lines are dangerous - use them correctly Putting into service Before use check cap-retaining screws are secure.If the Air tool is dropped check for cracked components. Check air line pressure before connecting the Air tool.The Air tool should be used only by people trained in the use of pneumatically operated tools. Use Keep hands away from moving parts. Never operate the Air tool near the face or body. Only use Air tool to fit CV boots. If air line pressure exceeds 9 bar fit a regulator. Disconnect the Air tool from the air supply after use.

Installation Information

Operation: 1. Slide boot onto arms, large end first. The arms should just protrude from the small end of the boot. To fit a boot to an inner joint, turn the boot inside out before sliding i onto the Airtools´s arm. 2. Press " + " button until arms open enough to pass over the joint. Keep hands clear of moving parts. The air line can now be disconnected. The arms will remain open until the " - " button is pressed. 3. Place Airtool over CV joint and press release button (" -"). Keep hands away from moving parts. 4. Withdraw the Airtool, leaving the boot in position. Complete the installation in the normal way.

• Complete with 3 piece adaptor kit for bikes, air beds and other inflatables
• Large on/off button for easy use with dirty/greasy hands or in poor lighting conditions
• Flat design gives you maximum stability during use
• Valve cap storage compartment for safe keeping when inflating
• Fitted with 3m power cable and fused 12V DC power plug to help you reach around the vehicle
• Screw stem valve connector helps reach awkwardly placed tyre valves
• Flexible air hose with easy access storage compartment specifically designed to reduce kinks
• 40mm diameter analogue pressure gauge in PSI, BAR, kPA
• Inflates a tyre in 4.5 minutes

• Complete with 2 piece adaptor kit for bikes; air beds and other inflatables
• Easy to read digital display
• Compact for easy storage and transportation
• Built in white LED light
• Rechargeable with power bank function
• 4 programmable pressure settings with digital autostop for ease of use
• Inflates bicycle tyre in <2 minutes
• Versatile - Ideal for cars; motorbikes and bicycles

• EU Conforms: Electromagnetic Compatibility - Directive 2014/30/EU Restriction of Hazardous Substances (RoHS) - Directive 2015/863/EU Regulation (EC) No1907/2006 - REACH Machinery Directive 2006/42/EC UK Comforms: Electromagnetic Compatibility Regulations 2016 Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008

• Comes With A Handy Carry Case To Store Neatly In Your Boot
• Includes: Tyre Inflator, Tyre Pressure Gauge, Tread Gauge, 1 x Pair Of Protective Gloves, 2 x Cleaning Wipes
• 6 Piece Emergency Tyre Kit

• Conforms with relevant Applicable UK Legislation: Electromagnetic Compatibility Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012 Regulation (EC) No1907/2006 - REACH Supply of Machinery (Safety) Regulations 2008 References to the relevant UK Designated Standards used or references to other technical specifications in relation to which conformity is declared: EN 50498:2010

• For use on tubeless tyres only
• A temporary repair designed to get you home, no need for any tools or wheel changes
• Larger tyres may require more than one aerosol
• Suitable for tyres up and including 16in.
• 1 aerosol for one tyre, single use product
• Supplied only as a merchandising unit
• Tyre sealant for emergency puncture repair

• Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.

• The Stanley 197483 has 512 different configurations, the Stanley 'Sortmaster' organiser can be customised for storing different sized tools
• Also ideal for stopping movement from one compartment to another during transport
• Can be used also for small items and fixings

• GS/TUV Approved
• Sizes 17mm & 19mm - 21mm & 23mm

• CE, ROHS, REACH, GS TUV Compliant

• The outside diameter is 1.3cm
• The size of the tube inside is 1cm
• 16in. air pressure hose
• 2 x 51in. Hose
• For the use with motor vehicles/motor bikes/cycles and more
• Inflate balls, bicycles tyres, beach toys
• Transfer oil, petrol and other liquids

• CE, ROHS, REACH, GS TUV Compliant

• GS/TUV Approved
• Sizes 17mm & 19mm - 21mm & 23mm

• CE, ROHS, REACH, GS TUV Compliant

• Manual provided
• in.Weight: 8.4kg in.
• in.360 degree lifting saddle in.
• in.Fitted with swivel castor wheel for ease of positioning in.
• in.Includes extension handle in.
• Lifting range: 135mm to 330mm

• Tough & shock proof metal body
• Spring pocket clip
• Capacity 10-50 psi
• Angled head fitting

• CE, ROHS, REACH, GS TUV Compliant

• Check your tyre tread depth on a regular basis
• Gives accurate readings
• Sturdy metal construction

• CE, ROHS, REACH, GS TUV Compliant

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1300g

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1975g