Workshop Tools

• Insulated
• Hardened
• CR-MO
• Combination, Long Nose, Diagonal, Cutting and Wire Stripping
• Comfort non-slip grip

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Replacement knuckle joints available (not covered by Lifetime warranty)
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Get the extra leverage you need to break loose frozen and stuck nuts and bolts.

• Temperature Range: -10°C to 60°C
• Burst Pressure: 63 bar (3:1 safety factor)
• Working Pressure (1): 300 psi / 21 bar
• Exceeds: BS EN ISO 2398:1997 (BS 5118:1980)
• Conforms to: ISO 5774:2008 (BS 6066:1981)
• Silicone free
• Resistance to oil and fuels
• Good flexibility and kink resistant
• Excellent abrasion resistance

• Conforms to ISO 5774:2008 (BS 6066:1981)
• ExceedsBS EN ISO 2398:1997 (BS 5118:1980)
• Hose Fittings Vertex Coupling & Standard Adaptor
• Working Pressure (Please note - an increase in temperature above 20°C will affect the working pressure quoted above.) 300 psi / 21 bar
• Burst Pressure 63 bar (3:1 safety factor)
• Temperature Range -10°C to 60°C
• Hose Length 10m
• Hose Inside Diameter 10mm / 3/8 in
• Hose Outside Diameter 17mm

• Simple and easy to use, ideal for general low volume tyre inflation
• Has a durable alloy body and Euro style valve connector, and comes complete with operating instructions
• General purpose tyre inflator with an all Alloy body with a rubber protected gauge

• Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Calibration: 10-210 psi / 0.7-15 bar Maximum Inlet Pressure: 15 bar Hose length: 0.85 m Tyre Valve Connection: Euro Clip-on Inlet Thread: G 1/4 l/min

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Standard and extended handle lengths for easier access in tight spaces or extra leverage.
• Slim profile head with flush direction lever offers better accessibility.
• Versatile lockable flex head: Switch between 11 locking positions and freely moving head.
• 90 tooth design with 4 degreeof arc swing for tight work spaces.

• Fits most UK & European Vehicles
• Programmable Sensor
• 433mhz sensor

• Flexible battery system: works with all MILWAUKEE® M12™ batteries
• 90° rotating head allows the user to easily direct the light beam at the desired work area
• Sealed aluminium head is designed for impact- and weather-resistant durability
• The 120 lumen LED light is 2x brighter and whiter than conventional incandescent bulbs
• Magnetic back for hands-free use
• M12™ LED electronics deliver 2x longer run time on a single charge with less heat