Workshop Tools

• Sets come in a durable foam.
• Chrome finish for corrosion and rust resistance.
• Ink-filled size labels for easy and quick size identification.
• Rounded I-beam handle for comfortably applying torque.
• Slim head dimensions for access in tight areas.

General Information

Pulley Holding Tool Set - VAG

• Complete set of adaptors including 4.8mm, 6mm, square 15mm x 6mm, square 15mm x 12mm, cup 13mm x 17mm , cup 16mm x 20mm, Spline M10, M12
• Equivalent to OEM tools T10172A (T10172) and T10554
• Designed to hold camshaft, crankshaft, oil pump and water pump pulleys and sprockets while loosening and tightening the fixing bolts

• Flexible battery system: works with all MILWAUKEE M12 batteries
• REDLINK PLUS intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• The highly efficient HEPA filter collects 99.97 % of airborne particles down to 0.3 microns
• Stackable tool box design for added portability and easier storage
• The DEK 26 power tool connector allows for efficient dust extraction from power tools
• On board blower for moving debris away from the work area
• Wall mount hanging plate included for increased storage options
• Internal accessory and hose storage allows all attachments to be carried with the tool avoiding loss of equipment
• Powerful M12 FUEL motor with a maximum air flow of 1275 l/min & 105 mbar provides 18V performance for both wet and dry clean up applications
• With a 6.0 Ah battery the vacuum provides 14 minutes of run time on high and 26 minutes on the low setting this compact vacuum is ideal for spot and service focused wet/ dry quick clean up needs

General Information

Cambelt Timing Tool Kit Ford 1.0GTDI Cambelt Timing Tool Kit Ford 1.0GTDI.

• Made in Sheffield
• Camshaft Locking blocks are EU Registered design
• Where the VCT pulleys require removing or setting the additional kit Part 6291 will be required

• Applications: Ford 1.0lt 3cyl Turbo charged EcoBoost engine from 2012<
• Equivalent to OEM 303-732, 303-1054, 303-1602, 303-1603, 303-1604, 303-1605/1, 303-1605/2
• GTDi engines found in Ford B-Max, C-Max, Fiesta, Focus, Grand C-Max, Transit Connect

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering outstanding power, run time and durability
• Line-lock-out function to prevent automatic start up
• Rubber front provides most comfortable handling
• Lower angle of battery slot - for better balance & ergonomics compared to previous model
• RAPIDSTOP™– stops all accessories in under the 2 seconds
• Universal reception to fit both, 6 and 8 mm accessories
• Delivering corded performance similar to a 1200 W grinder
• Removable dust screen to prevent debris entrance, prolonging motor life
• Slim handle design
• Spindle lock - increased productivity by reducing the need of 2 wrenches

• 1x Gates Mounting Tools, timing belt (GAT4528)

• Slim handle design
• FIXTEC™ nut for tool-free wheel change
• The DNA of our FUEL™ platform redefines the balance of cordless technologies. MILWAUKEE®'s POWERSTATE™ brushless motor, REDLITHIUM™ battery pack and REDLINK PLUS™ electronic intelligence delivering  outstanding power, run time and durability
• 125 mm keyless guard for great grinding capacity and fast guard adjustment without using a key
• Non-lockable safety paddle switch with line-lock-out function to prevent automatic start up
• RAPIDSTOP™ for fastest disc brake in less than 2 seconds and best user protection
• Anti-vibration side handle for lower vibration
• Delivering corded performance similar to a 1200 W grinder
• Flat gear head design - allows user working within acute angles down to 42°
• Removable dust screen to prevent debris entrance, prolonging motor life

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 1/2in. Insulated T-handle Wrench 200 mm
• 1/2in. Ratchet Wrench 250 mm
• 1/2in. Extension Bar – 125 mm & 250 mm
• 1/2in. Bits Socket (120mm) – 4, 5, 6, 8 & 10 mm
• 1/2“ Hex Socket (55mm) – 10, 11, 12, 13, 14, 17, 19, 22, 24, 27 & 32 mm
• Packed in blow case and EVA foam
• Each tool is fully insulated to VDE and EN 60900 standards to protect from electric shocks up to 1500V DC and 1000V AC.
• Suitable for electricians(1000V AC safe live working).
• Manufactured from hardened and tempered Chrome vanadium steel.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fluids sold seperately J02230
• Added value to servicing & MOT work
• Thorough 2-stage solution
• Process complete in just over 1-hour
• Professional system for DPF cleaning
• High-quality long-lasting construction

• Flexible battery system: works with all MILWAUKEE M18 batteries
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Variable speed trigger for extra control during cutting
• In-Line wrist design for increased control during cutting
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Belt clip for secure mobility
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• Accurate cuts with maximum cutting depth of 2.0 mm in steel
• Unique 360dgtool-free rotating head with 12 locking positions to access tight spaces and increasing user comfort

• Part of the PACKOUT™ modular storage system.
• Constructed with impact resistant polymers for jobsite durability.
• Metal reinforced corners.
• Each box comes with a set of Quick-Adjust Dividers that let users fully customise the layout of the drawers for better organisation.
• Locking security bar prevents an unwanted opening of drawers during transit and allows to shut the drawers with a padlock.
• Steel ball bearing slides support up to 11 kg of weight per drawer.
• PACKOUT™ Drawer Tool Box allows for easy access to your tools, even when placed at the bottom of the PACKOUT™ stack.

• Hangs on PACKOUT™ Wall Mounting Plates.
• Stacks on PACKOUT™ boxes.
• Part of the PACKOUT™ modular storage system.
• Constructed with impact resistant material.
• Weight capacity: 22 kg.
• Front door to easy access stored tools and items inside. Door can be slided into the box to make access easy and comfortable.
• Secure stacking and hanging due to lock mechanism on bottom and rear.

• MAXBITE pliers have special jaw geometry for maximum grip.
• Lever release design Traditional release lever for jobsite convenience.
• Rust protection Chrome plated tool increases life by reducing corrosion.
• Hardened jaws Better grip force on jobsite material.
• TORQUE LOCK Faster set up and easy release when clamping flat and round material. Extra force can be applied to the TORQUE LOCK screw for better and more secure grip. Can also be used for hanging / storage purposes.

• Rounded I-Beam handle for comfortable handling grip.
• Chrome alloy steel, chrome plated.
• Ink-filled labels for clear visibility.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for long-lasting ratchet life.