Workshop Tools

• Product Dimensions (L x W x H): 24 x 15 x 8.5cm
• Max Pressure (PSI): 100psi
• Features an analogue display pressure gauge that provides readings in both PSI and Bar
• Suitable for inflating tyres on cars, motorcycles & bicycles and it has a trigger lock valve adaptor. It also comes supplied with two nozzle adaptors for inflating footballs, cushions and other inflatables
• It also has a wide base that provides better stability when the foot pump is in use as well as a anti-slip tread plate. Plus, the pump has a retaining clip that runs the whole width of the foot pedal which makes it more secure when storing the foot pump
• Comes with a reinforced base at the bottom of both cylinders which enables the rods to smoothly glide into barrels. This helps to reduce strain on the cylinder end caps on both barrels
• This deluxe 100PSI double barrel foot pump is designed to provide you with a long lasting performance

• Conforms to EN16051:2012

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Wrench can be used in extremely tight situations where other wrenches would fail
• 25% wider jaws providing the ability to work on larger fasteners
• 60% thicker ergonomic handle design
• laser-etched size indexing
• Features a patented low-rattle design

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Diesel only
• Refill fluid hose
• Can be used for multiple refills

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• During use hold the nut splitter with a spanner or socket
• Car Mechanics Best Budget Buy
• Before use, check grub screw is located in the slot of the splitting blade
• No2 12 / 16mm

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which isn’t possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.8mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Velcro backing pad for a fast and easy polishing sponge change within seconds
• Fits with both MILWAUKEE® M18 FUEL™ Random Orbital Polishers - M18 FROP15 & M18 FROP21

• Includes Tips: @0-Degree: 0.95 & 1.2mm, 1.2 & 1.8mm @45-Degree: 1.2mm @90-Degree: 1.2mm
• External: 6 - 20mm
• Internal: 8 - 24mm
• Heavy-Duty Return Spring
• Convert from Working with External to Internal Snap Rings

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Part of PACKOUT™ Shop Storage.
• Can be also attached to metal surfaces due to magnetic back.
• Fits in PACKOUT™ Slim Organiser (4932471064) & PACKOUT™ Compact Slim Organiser (4932471065).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores bit holders, bits, sockets, screws, nails and other small metal items.

• Holes in rail are on top and on the bottom for easy mounting.
• Usable with impact and chrome sockets.
• Metal ball detent clip for superior socket retention.
• Compatible with standard and deep sockets removable end caps for easy clip removal.
• Flexible interchangeable rails and clips for customisation of ¼? ¾? and ½? drive sockets.

• Includes Blow Mold Case
• 3/4 x 13/16, 7/8 x 15/16 in., 19 x 21 mm, 3 in. Extension
• Radius corner design for better gripping of fastener & chamfered openings for faster socket fit over fastener
• Black Phosphate

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Maypole’s flux cored Mig welding wire is suitable for these types of situations. Flux cored wire is not only an economical solution for those of you who only weld on the odd occasion, but it is also the perfect solution for outdoor welding as it will still work flawlessly even in light winds which is not possible when using gas. This spool comes with 0.4kg of flux cored steel wire and is 0.9mm thick.

Established in 1969, Birmingham based company Maypole has a long heritage in the manufacture and supply to customers in the automotive, trailer, leisure and agricultural markets. For over 40 years Maypole have been manufacturing and supplying its products to its ever growing network of customers and are proud to continue to add to their ever increasing portfolio of products.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Also suitable for use with regulators from other brands
• Allows one regulator to be used on multiple types of gas bottles

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

General Information

Replacement Head for 1/2"D Power Bar. Replacement Head for 1/2"D Power Bar

• Our breaking point is 80kg/m = 784.815Nm
• DIN 3122 is 512 Nm
• Chrome Vanadium
• 1/2in. drive
• Replaceable head for Part No SS1145, 1343 and 2775

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 10 mm