Workshop Tools

• Corrosion resistant & non-magnetic
• The double-faced head is a cast barrel shape offering maximum striking surface while enhancing balance
• Shock reducing cushion grips minimize vibration & provide a non-slip grip while maximizing comfort when striking
• Non-Marring: Helps reduce impact and helps reduce work damage where surface protection is critical
• Non-sparking: For safe use near combustible materials

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Designed for use with impact drivers the SHOCKWAVE™ IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.
• Laser hardened WEAR GUARD TIP™ for improved wear resistance and protection of the fit over the life of the bit.
• Custom engineered steel - Milwaukee® custom metal formula makes the SHOCKWAVE™ bits more resistant to shock from impacting.
• SHOCK ZONE™ reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE™ design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE™ Geometry - designed to flex:

• Textured nose maintains control when grabbing and twisting with serrated nose.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Rounded tips to grab hoses without damaging these.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Rounded tips to grab hoses without damaging these.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Bar, psi, kPa versions and range of accessories
• Built in swivel and hanging device
• Individually tested and certified
• Direct valve design increasing inflation and deflation rates
• Proven Bourdon Tube with beryllium copper construction for robustness and high shock resistance
• Modern, lightweight and shock resistant construction
• Clear dial display
• Guaranteed accuracy - individual testing
• High versatility - flexible usage
• Reduced cost of ownership - long product life
• Increased customer service - high levels of speed, accuracy and safety
• Reduced operating costs - fast inflation and deflation rates
• Fast and simple to use with guaranteed accuracy, this mechanical unit offers longer life, lower operating costs and excellent shock resistance – all within a modern functional design featuring a clear analogue display

• Accuracy: Exceeds EC Directive 86/217 Reading Accuracy: 2 psi / 0.1 bar / 10 kPa Maximum Inlet Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow:910 l/min @ 13 bar supply Hose Length: 1.8 m / 6 ft Tyre Valve Connection: Euro Clip-on Calibration: 0-170 psi / 0-12 bar

• Solid and robust construction
• Hand trigger inflate and thumb controlled deflate
• Auto power off
• Backlight
• Long battery life with battery level indicator
• psi, bar kpa units of pressure selectable by button; last selection saved
• Powered by PCL inflation technology and experience
• Suitable for all applications including tyreshop environments
• Low and simple maintenance
• Easy and cost effective to use
• Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
• Large, clear, easy to read LCD display with backlight

• Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa

• IP65 rated weather seal to keep out rain and jobsite debris.
• The interior features 10 removable & mountable bins that can be mounted onto common jobsite materials for easy access.
• No-travel bins seals to prevent the bins contents from migrating between bins during transport.
• Constructed with impact resistant polymers for jobsite durability.
• Part of the PACKOUT™ modular storage system.

• Contents include 5 x 1/4in. Drive UJ Sockets: E4, E5, E6, E7, E8 x 40mm long
• 4 x 3/8in. Drive: E10, E12, E14, E16 x 60mm long
• Manufactured from Chrome Molybdenum
• Fully polished finish
• Supplied in EVA foam with clear lid

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Steering Wheel Lockout Cover 500mm

• Durable socket rail for long-term storage.
• Stamped sizes for better visibility in all lighting conditions.
• Single forged piece adds durability in high torque applications.
• Slim design for better access in tight spaces.
• FOUR FLAT™ sides on socket deter rolling and provide a wrench-ready design.

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Hardened magnetic tips for maximum durability and fastener retention
• Anti-roll, 3 sided collar on the handle
• Wrench ready shank allows extra leverage to be applied

• Flexible material allows for easy install and removal.
• Form-fitting lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 26 min / 50 min / 52 min / 95 min or less
• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah battery packs recharge in 26 min / 52 min / 59 min or less
• Recharges all M18™, M14™ and M12™ REDLITHIUM™ battery packs

• Durable socket rail for long-term storage.
• Stamped sizes for better visibility in all lighting conditions.
• Single forged piece adds durability in high torque applications.
• Slim design for better access in tight spaces.
• FOUR FLAT™ sides on socket deter rolling and provide a wrench-ready design.

• Internal blade storage for extra blades.
• Supplied with 12″ / 24 Tpi blade.
• Tough metal frame, supports higher tension (25,000 PSi / 250 lbs).
• Will accept up to 12″ blades.
• Overmould handle ensures secure grip and user comfort.

• Flexible battery system: works with all MILWAUKEE® M18™ batteries
• Protected against splashing water at all angles (IP24)
• 2 adjustable metal hooks for hanging in vertical and horizontal position
• Pivoting 45° forward & backward head allows for 180° coverage
• TRUEVIEW™ high definition lighting
• Thanks to its compact design it operates in locations other lights cannot
• Three LED design with 2 light settings provides 300 lumens on High and 130 lumens on Low setting

General Information

Diesel Injector Puller

• Saves time and money when injectors are difficult to remove
• Incorporating a slide hammer
• Presented in a handy blow mould case
• Diesel Injector Puller with M8/M12/M14 adaptors Assists removal of stubborn Bosch and Lucas diesel injectors