Workshop Tools

• Accepts higher feed pressure and torque equalling less breakages.
• Impact resistant ABS case with added rubber corner protection.
• Polished finish reduces friction and extends drill bit life.
• 135° Split point - Precision starting, drill bit won't walk on material surface.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better increasing life time.
• Parabolic web cross section: Large web thickness. Strength built in.
• THUNDERWEB design is characterised by a conical shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point the THUNDERWEB core is thicker than that of

• Permanent visible ID markings allows for quick tool identification
• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications
• Slim shank diameter for access to low lying screw applications
• VDE tested to 10000 V and guaranteed to 1000 V

General Information

Engine Timing Tool Set - Fiat 0.9 Twinair Engine Timing Tool Set - Fiat 0.9 Twinair.

• Made in Sheffield
• OEM cross reference to component
• For engine codes 312A2 000
• For engines fitted to Fiat Panda/Punto/500/500c, Alfa Romeo Mito and Lancia Ypsilon models
• Chain driven engines

• All metal design for maximum durabilty.
• FOUR FLAT sides on socket deter rolling.
• 90 tooth design with 4Dg of arc swing for tight work spaces.
• 76 mm extension, 152 mm extension, universal joint
• Deep well sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm
• Standard sockets: 5 mm, 5.5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm

• M18™ REDLITHIUM™ 2.0 Ah / 4.0 Ah / 5.0 Ah / 6.0 Ah / 9.0 Ah battery packs recharge in 40 min / 80 min / 100 min / 124 min/ 180 min or less
• Recharges all M18™ and M12™ REDLITHIUM™ battery packs
• Recharges in sequence - first in, first to charge - resulting in less time needed to manage charging cycles
• M12™ REDLITHIUM™ 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 40 min / 70 min / 80 min / 90 min or less
• Charges MILWAUKEE® batteries on the go, perfect for tradesmen and other professional that can use the down time to re-charge their batteries using conventional 12V sockets

• SHOCKWAVE™ IMPACT DUTY Screwdriver bits
• Comfortable Tri-Lobe screwdriver handle optimised for maximum user comfort and high torque applications.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• FOUR FLAT™ sides on socket deter rolling.
• 90 tooth design with 4 °of arc swing for tight work spaces.

General Information

Diesel Injector Remover - VAG TDi

• No solenoid removal required
• Use in accordance with OEM instructions
• Equivalent to: OEM T10402, T10415
• Engines: 1.6L TDi CR diesel & 2.0L TDi
• Applications: Volkswagen Golf 2009, Seat Ibiza 2008, Altea 2009, Leon 2009, Altea XL 2009, Altea Freetrack 2009, Toledo 2013 and Audi A3 2009/2013
• Diesel injector remover for VAG vehicles fitted with 1.6 & 2.0 CR TDi engines

• Slim profile head with flush direction lever offers better accessibility.
• FOUR FLAT™ sides on socket deter rolling.
• All metal design for maximum durabilty.
• Sockets are stamped with measurements on the flat side for easy-to-read visibility.
• Comes with a removable inner tray perfectly designed to be stored.
• 90 tooth design with 4 °of arc swing for tight work spaces.

• 8 - 19 mm
• 15 Degree angled bend
• The 90 tooth count gear allows 4 degree arc swing
• Non- Slip Ends
• 6 Point
• 12 Piece
• Full Polish Chrome

• Features a non-slip ratchet end and non-slip open end

• Rounded tips to grab hoses without damaging these.
• Single-joint grip force for more control and better grip compared to double joint.
• Multi-function gripping zones for grabbing a wide variety of materials such as screws, cables and round parts.
• Deep-reach cross handles for increased reach in tight spaces for best access.

• Kit Contenst: 4932492500, 4932492501, 4932492502

General Information

Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair. Engine Timing Tool Kit - Alfa Romeo/Fiat Multiair

• Fiat Punto Evo/Punto/ Bravo 2009-2013 with engine codes 198A7.000/955A6.000, Lancia Delta 2010-2013 with engine code 955A7.000
• Applications: Alfa Romeo Mito/Giulietta Multiair105/Multiair Turbo135/163/170 from 2009-2013 with engine code/955A6.000/955A2.000/955A7.000/955A8.000/940A2.000
• Supplied in metal storage case with instructions and application list

• Working pressure 4 to 8 bar
• One model that covers all vehicle models
• Reduces fitting time to approximately 20 minutes
• The boot remains fully expanded until the release is pressed
• The piston design allows the boot to be expanded and then disconnected from the airline – no need to drag it round the garage
• Suitable for use with the full range of NAPA CV boots as well as other branded ‘stretchy’ boots
• Manufactured using a high quality resin based plastic giving it a robust but lightweight design – ideal for everyday garage life
• Pneumatic tool that utilises existing airline systems in garages
• BS EN ISO 4414:2010 Pneumatic fluid power
• BS EN ISO 12100:2010 Safety of machinery
• The Machinery Directive 2006/42/EC
• Features a patented built in safety mechanism and is fully CE Certified
• Supplied ready assembled

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Deep wall construction provides clearance for protruding bolts.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Reduced vibration and minimzed rebound
• Durable grip handle with an anti-slip design
• Precision balanced design for optimized control

• Flexible battery system: works with all MILWAUKEE M18 batteries
• REDLITHIUM battery pack provides superior pack construction electronics and fade-free performance to deliver more run time and more work over pack life
• Integrated LED light to illuminate the work area
• Supplied with 2x nozzles: 1x reduction nozzle for heat intensity on a specific area 1x reflector nozzle to apply heat around an object such as pipes
• Durable ladder hook for work space management and safety
• Individual battery cell monitoring optimises tool run time and ensures long term pack durability
• REDLINK overload protection electronics in tool and battery pack deliver best in class system durability
• Reaches operational temperature in six seconds allowing the user to quickly complete his application
• High performance heat coil allows the tool to reach 470 C

• Accuracy Standards - Tested to over 400,000 cycles at 100% accuracy, meets EC 86/217 and compliant with EN12645:2017
• Piston & Seal Design - New design, less drag, reduced friction & less movement inertia means no internal corrosion, no sticking and no skewing of accuracy
• Valve Mechanism - Simplified 2 stage mechanism design prevents user having to in.pushin. against full line pressure on deflate preventing fatigue
• Biomorphic Shape - Ergonomic, easier to use and less prone to damage when dropped
• Lighter Weight - Gauge body weighs 923g, less work strain and easier for repetitive use
• AIRFORCE® MK4 Tyre Inflator is robust and highly accurate, offering leading inflation and deflation rates and high performance for both indoor and outdoor applications

• Accuracy: Meets EC 86/217 Compliant with EN12645:2014 Reading Accuracy: 0.1 bar / 2 psi Maximum Inlet Pressure: 15 bar / 218 psi Inflation Flow: 500 l/min / 13 cfm Operating temperature: -25 to 55 °C Hose Length: 3.6 m / 12 ft Tyre Valve Connection: Twin clip-on Calibration: 0-174 psi / 0-12 bar