Workshop Tools

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• 1.6 mm thick blade resists bending reduces vibration and blate flattering at speed.
• Teeth are hardened and triple sharpened for a super sharp splinter free clean cut.
• 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts.

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 17 mm

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Black
• Design helps protect fingers
• Rubber
• Flexible for a smooth contoured finish
• Grips most sheets of wet and dry sanding material

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 6in. Long

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 152mm
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Angled

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure
• Lacquer finish for exceptional rust prevention
• Hardened jaws & cutting edges for strength & durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure.
• Hardened jaws and cutting edges for strength and durability, lacquer finish for exceptional rust prevention.
• Professional grade pliers are constructed from chrome-moly material and feature comfort grip handles.

• Pliers Combination Slip Joint Pliers 8in.

• High quality hot-forging process provides a performance
• Premium chrome finish to protect against corrosion
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Suitable for the bars with an end on the handle
• Manufactured from CR-MO steel for strength
• Breaker / Power bar head replacement

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Part of PACKOUT™ Shop Storage.
• Constructed with impact resistant polymers.
• Fits in PACKOUT™ Organiser (4932464082) & PACKOUT™ Compact Organiser (4932464083).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores screws, tapes and other small items.

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Complies with BS EN12645:2014
• Includes integral pocket clip and removable protective cap

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• For use on tubeless tyres only
• A temporary repair designed to get you home, no need for any tools or wheel changes
• Larger tyres may require more than one aerosol
• Suitable for tyres up and including 16in.
• 1 aerosol for one tyre, single use product
• Supplied only as a merchandising unit
• Tyre sealant for emergency puncture repair

• Conforms with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulation 2012. References to the relevant UK Designated Standards used or references to other technical specifications in relation to which we declare: all requirements for product conformity including any testing and inspections are controlled by Ring Quality Assurance Department under the scope of our ISO 9001:2015 Quality Management System.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Abrasive Belts are suitable for M12 FBFL10 and M12 FBFL13.
• Ceramic grain produces low heat, preventing metal discolouration on stainless steel.
• Suitable for all metals (steel, non ferrous metals, aluminium, titanium and stainless steel).
• For grinding metal weld seams, contours, edges and profiles.
• Ceramic grain quality: Extremely high removal rate with best lifetime.

• Easy Release handle mechanism
• Comfort grip handle
• Heat treated CR-V jaws and CR-MO handle material for added strength and durability

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Precision designed tamper proof 5 star tips ensure eccurate fastener fit
• Includes color coded rail for convenient storage and identification
• TS8H, TS10H, TS15H, TS20H, TS25H, TS27H, TS30H, TS40H, TS45H, TS50H & TS55H
• Mirror polished Chrome plated finish

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 8 mm

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Feeler Gauge Imperial/Metric - 32 Blades Feeler Gauge Imperial/Metric - 32 Blades.

• Imperial Sizes: 0015/002/0025/003/004/005/006/007/008/009/010/011/012/015/016/017/018/ 019/020/021/022/023/024/025/026/028/030/032/035in.
• Brass: 0010in./254mm
• Metric sizes: 038/051/063/076/102/127/152/178/203/229/254/279/305/381/406/432/457/ 483/508/533/559/584/610/635/660/711/762/813/889mm
• 32 blade 0038-0889 Metric and 00015 - 0035 Imperial Plus Brass 0010-0254 for use on the reluctor air gap on electronic ignition systems where non-metallic blades are required

• It has a 14mm Bi-Hex x 65mm 12pt 3/8in. drive and is made from Chrome Vanadium. Also used on other manufacturer's fitted with 8mm Bosch spark plugs such as:
• Renault 1.2 16v
• Peugeot 207 and 307
• Mercedes-Benz M156 engine
• BMW Mini
• BMW E90335I N54 engine 2006
• This specially designed - thin walled Spark Plug Socket with a spring clip to hold the plug is used on most Citroen vehicles

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.