Workshop Tools

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.

• Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
• Keys feature long hex arm for access in hard to reach areas. Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification.
• Rugged black phosphate finish for long life and added strength

• Comfort grip l-handles for secure grip & more torque, ball end on long arm for better angle of entry in hard to reach areas & stubby hex shank on side handle for tight fit access

• Comes complete with a handy storage case
• Range 0-99 psi / 0-7 bar
• Measures in PSI, bar, kpa, Kg/Cm2
• Tread depth gauge to measure tyre tread depth
• Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve

• Dimensions (MM): H 141 x W 40 x D 29
• Weight (kg): 0.094
• Batteries: 2x CR2032 Included

• Gas cartridge sold separately
• For use with G2350 or 2175A Go System threaded gas cartridges
• Safety checked and test burned
• Ideal for general DIY, paint stripping, plumbing and intermediate soldering
• Stability base included
• Simple and safe to use
• Auto start Piezo ignition
• Rapid 1 minute warm up, use at any angle with precise flame control
• Stable powerful fine flame (up to 1400 C)

• Conforms to BS:EN521

General Information

Socket 46mm 1/2"D Socket 46mm 1/2"D.

• Manufactured from Chrome Molybdenum thin wall reduces the chance of damage to surrounding components
• Air impact quality - Single Hex (6pt)
• Total length 50mm / internal length 25mm
• Single sided rear swinging arm rear wheel and sprocket side nuts
• Equivalent to Triumph OEM T3880046Application: Datona 595 / 955 Speed Triple / Sprint ST 955 / 1050 / Tiger 885i / 955

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Magnetic holding prevents wear down and enables secure hold.

• Self calibrating
• Auto power off
• Measures tyre tread depth in mm / inch
• Measures pressure in psi / bar / kPa / kgf/cm²

• Tyre Pressure Accuracy: +/- 1.5 % Reading Resolution: 0.1 psi / 0.01 bar / 1 kPa / 0.01 kg/cm² Calibration: 2-100 psi / 0.15-7 bar / 15-700 kPa Tyre Tread Depth Accuracy: +/- 0.2 mm Reading Resolution: 0.01 mm / 0.001 in Calibration: 0-15 mm

• 180 degree rotating flexible heads allow you to apply leverage at any desired angle and get around obstructions in tight areas.
• Premium chrome vanadium steel provides durable life
• Heat treated for maximum strength
• 72 tooth ratchet
• Dual 180 degree swivel ratchet head design
• Mirror Polish Finish

• ASME Compliant

General Information

Camshaft Drive Tensioner Wrench - for VAG

• Use on the latest range of 1.0L, 1.2L and 1.4L belt driven turbo charged engines
• Applications: Seat Mii/Leon, Skoda Octavia/Citigo, Volkswagen Up!/Golf V11, Audi A1/A3
• For adjusting the Camshaft drive belt tensioner as described by the manufacturer
• Use with Engine Timing Tool Kit - Part No 6230
• Measures 30mm (across the flats)

• Sizes: 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm & 11 mm
• 7 Piece metric nut driver set
• Chrome Vanadium

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Instantly FLARESAFE; use at any angle
• Solid brass construction
• A durable high power, high temperature (up to 1480 C) fine flame gas torch

• Conforms to BS:EN521

The Maypole Single Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Non slip footplate
• Locks down for easy storage
• Locking valve connector
• Supplied with 3 additional nozzle adaptors
• TUV/GS approved
• Heavy duty single footpump

• Teardrop slim ratchet type
• 6 Deg. / 60 Teeth Swing Arc Ratchet
• Polished Chrome

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 2,500 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• Universal Joint provides easier access in hard to reach spaces to get every job done, both in the garage and on the jobsite.
• Ball detent securely holds the socket to the adapter.
• Chrome finish for optimal resistance to corrosion and rust.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Wiper Arm Removal Tool Wiper Arm Removal Tool.

• Screw thread and hook feet
• Sized for difficult access
• Time saver
• Suitable for spline taper and taper spigots

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Supplied in a wallet
• Reset button
• Solid construction
• Dial type tyre tread gauge

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• Qty: 50
• 45 Degree Angle Profile
• Metric Thread

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry designed to flex:
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications but also delivers a full system solution for all the user's drilling and fastening needs.
• Custom engineered steel Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• L-keys for Torx Screws - T10, T15, T20, T25, T27, T30, T40, T45 & T50
• S2 steel with PP/TPR handle
• ideal for use by mechanics working on electric vehicles
• safe use for live voltages up to 1000V AC/1500 DC

• Forged designs for rust protection and increased durability
• Comfort grips that will not peel
• Versatile 89mm jaw capacity in a compact 229mm size, offering a solution for multiple plumbing and automotive applications

General Information

Oil Filter Wrench Set 3/8"D 2pc

• Stores paper towels, tapes.
• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.

• Range of hose sizes, working lengths and a choice of colour
• Hose recoils to a fraction of it's working length
• 200 m straight ends with spring guard
• Nickel plated 360° swivel fittings
• Polyurethane (PU) material

• Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue

General Information

Timing Pins - Renault engines. Timing Pins - Renault engines

• OEM codes MOT 1489/1054/1430, Mercedes 607 589 01 15 00, 607 589 00 15 00
• For Flywheel locking on Mercedes Benz Citan use Laser 3203 (starter motor removal required)
• Renault engine code K9K (2002-on), Mercedes 607951 (K9K) (2012 on)
• Popular with the Nissan Micra 15 Dci
• Crankshaft and Camshaft timing pin set for Renault 15 and 19 DCi engines fitted to Laguna, Kangoo and Clio models

• Built in storage space for hose, power lead & valve adaptors
• Cuts off when selected pressure level is reached
• Ideal for roadside emergencies
• Compact and lightweight, take it anywhere you go
• Comes with a digital display and a 2 piece adaptor kit
• Ideal for inflating tyres and other inflatable objects
• This simple to use air compressor automatically cuts off when the pre selected pressure level is reached

• CE, ROHS, REACH, GS TUV Compliant

• Integrated bolt cutter.
• Integrated crimper.
• Rust protection increases tool life by reducing corrosion.
• Reaming head for smoothing 12 - 25 mm pipe.
• Plier suitable for gripping and bending cables.
• Wire stripper : Strips wire sizes 0.75 mm², 1.0 mm², 1.5 mm², 2.5 mm², 4.0 mm², 6.0 mm².
• Loop maker: Built in loop maker function for wire.
• Wire cutter: With curved laser hardened cutting edges.
• One-handed swing lock: Easy one-handed use and remains locked while in pouch. Spring loaded for easy opening.